Time to switch reemz

[quicksilver22]

Well, I'm about damn tired of my ADR Spades, i've been through almost three sets in the past 5 years and figured its karma and time for a change (or just have to watch out for potholes more).

http://adaptivestrategies.com/asaAR1silver.jpg

Read at the bottom for updates

http://memimage.cardomain.com/ride_images/1/1131/3381/2826690036_large.jpg

[RAZ_76]

Gunmetal.

[pinoyesv6]

silver if you're staying 4x4 and gunmetal if you're gonna lower it.

[SleekGTZ]

I vote for silver.

[bmaddock]

Silver for sure.

[quicksilver22]

...now picture it without the spoiler and with an EGR (or) eBayJDM visor ?

[rez887]

pm'd.

[02galant]

I think Rez has exactly what your looking for. But i definitely say gunmetal and throw a Eibach Pro-Kit on there since potholes are a problem because it wouldnt be as aggressive of a drop and not very expensive. And for that matter I ran them on factory shocks and struts before I put the Tein C/O on and it was a very comfortable ride.

[Boosted]

Definetly Gunmetal. I prefer gold/bronze rims, but to each their own.

[RedGalant2k1]

Silver on the drivers side, gunmetal on the passenger side (for the ladies).

[quicksilver22]

http://adaptivestrategies.com/asaAR1silver.jpg

ASA AR1s


I get them tomorrow! haha!

[platano]

[QUOTE=quicksilver22;443044]Well, I'm about damn tired of my ADR Spades, i've been through almost three sets in the past 5 years and figured its karma and time for a change (or just have to watch out for potholes more).

Opinions:
Drag DR 19 Silver then Gunmetal
http://adaptivestrategies.com/Drag_DR-19_silver.jpghttp://adaptivestrategies.com/Drag_DR-19_gun_metal.jpg

or something similar to them?

I have a dented rim that threw the weights off (go figure) and killed my alignment (monster pothole). I'd like to have these ordered by Friday and on my car by next Wednesday/Thursday. Anyone have any thoughts or suggestions? (I'd like to stay <150 per rim.


I don't know what your taste is in terms of appearance...

but my opinion is that Drag wheels are garbage. save up your money and buy something good quality. Maybe even invest in a 2-peice wheel since you have bad luck with potholes. You don't have to buy some Volk's or Rays, but get something that is know for their material quality/durability. I've ran through many sets (apprx 7) of wheels since 1999 and i've learned that you get what you pay, usually.

[Galant306m]

Silver on the drivers side, gunmetal on the passenger side (for the ladies).

Lol at that

And nice looking rims quick. Pics as soon as you get them on man.

[quicksilver22]

I don't know what your taste is in terms of appearance...

but my opinion is that Drag wheels are garbage. save up your money and buy something good quality. Maybe even invest in a 2-peice wheel since you have bad luck with potoles. You don't have to buy some Volk's or Rays, but get something that is know for their material quality/durability. I've ran through many sets (apprx 6) of wheels since 1999 and i've learned that you get what you pay, usually.


haha read one post up yours, I picked up the ASA AR1s... I stayed away from DRAG after I did a bit more research. ...besides, they were too noisy for me.

[Boosted]

I get them tomorrow! haha!

About damn time, 2 months later lol jk. So, you stuck to silver I presume?

[9G]

nice

[quicksilver22]

well, they came in today!!!

...but they are 18" and in black with a polished lip. I sent them back on the same truck and am getting a refund by days end.

http://i176.photobucket.com/albums/w174/eg6gsr/HPIM0586.jpg

Kosei S6r... they are a +38 offset, I'm going to grab these as temporary wheels... will they work?