US Urethane Kit

[ewgiii]

Hey, i got this e-mail back from e-racing.com. I sent them a message asking if they had the kits at the following link in Urethane. http://www.eracings.com/catalog/default.ph...?cPath=21_30_85 ('http://www.eracings.com/catalog/default.php?cPath=21_30_85') Let me know what you think about it. I'll be responding to it later this week. Thanks.
John at eracing.com
Hello,

I have those kit in stock..and they are made of fiberglass. I'm in the
process of making the Poly Urethane for the NMS Type body kit in a full kit.
What do you think?? I'm trying to make a bumper that will fit 99-03...with
additional grill.... please I need your input and also what are your
interest as far as body kit or accessories for galant???

Thanks,
JOhn

[ewgiii]

ok, guess there's no suggestions, so i'll just tell him what i want. Thanks https://www.thegalantcenter.org/style_emoticons/default/biggrin.gif

[TheRealDeal]

yeah bro that shit is tight....i was looking at getting myself that as well

[Lazarus]

if they make that in Urethane I will blow my top

[pinoyesv6]

<div class='quotetop'>QUOTE(Lazarus)</div><div class='quotemain'>if they make that in Urethane I will blow my top</div>

they should get u to test its strength lol

[ewgiii]

post what you would think if they made this happen for us and what you would like to see in the future. I mean, a US Urethane kit.... it dosn't get sweeter than that!

[Lazarus]

If they come out with the Urethane Kit I will go ahead and swap out my front but because my sides and rear are molded I will have to keep them Fiberglass. Would be nice to have it for the front However it will be a very large peice of Urethane. It will flex at high speeds and that is what kinda worries me. Most urethane kits I know or are Ad ons or Lips. With the way that one fits on the front there will have to be alot more mounting points than the 4 that are on it now.


Perhaps I should test it out Allan. I've managed to "DSM8" 2 out of the 3 Kits offered in the states already. I could Use a Urethane Kit though.

[Cali]

the urethane front you're talking about laz (the one you and i have) does indeed exsist but a word of warning. this bumper was orginally made for JDM galants and THERE ARE GAPS, even with JDM headlights. i really highly doubt that this bumper was fitted to a US spec galant so there will be crazy gaps and you wont be able to fill them in since fiberglass will not adhere to urethane. other wise, i would love to get it to.

[Ghost Beat]

damn thats a bitch i was all hyped like yeahh urethane! but cali's point is extremely good its gona have major gaps https://www.thegalantcenter.org/style_emoticons/default/sad.gif im finaly getting a kit too just waiting on insourance money to come in the mail prolly gona go with the initial v at the site dunno if i want the sides off it tough they dont realy look that great anyone got some pics of the side skirts off the initial kit on the lant or just lying around?

[toc8g]

<div class='quotetop'>QUOTE(Lazarus)</div><div class='quotemain'>if they make that in Urethane I will blow my top</div>

Me Too :shock: https://www.thegalantcenter.org/style_emoticons/default/biggrin.gif

[BIGMONEYDAY]

<div class='quotetop'>QUOTE(ewgiii)</div><div class='quotemain'>post what you would think if they made this happen for us and what you would like to see in the future. Â*I mean, a US Urethane kit.... it dosn't get sweeter than that!</div>

Hey man, I'd love to get that Intial V kit in urethane or fiberglass, as long as it fits the US version so I can still make use of the front and rear impact bars. Also if your looking for additional input on this kit, of and other kit that they could produce, I suggest that they make some Galant specific bolt on fender flares and perhaps also some wide body door skins. Also as far as other kit ideas, I wouldn't mind seeing an Octane kit for the 8G and some different hoods like a ram air.

[ewgiii]

<div class='quotetop'>QUOTE(cali)</div><div class='quotemain'>the urethane front you're talking about laz (the one you and i have) does indeed exsist but a word of warning. this bumper was orginally made for JDM galants and THERE ARE GAPS, even with JDM headlights. i really highly doubt that this bumper was fitted to a US spec galant so there will be crazy gaps and you wont be able to fill them in since fiberglass will not adhere to urethane. other wise, i would love to get it to.</div>

u missunderstood, it WILL fit US galants. I'm sending them another e-mail tonight. Keep the concerns coming, i sent them a link to this page.

[pinoyesv6]

<div class='quotetop'>QUOTE(BIGMONEYDAY)</div><div class='quotemain'>Hey man, I'd love to get that Intial V kit in urethane or fiberglass, as long as it fits the US version so I can still make use of the front and rear impact bars. Â*Also if your looking for additional input on this kit, of and other kit that they could produce, I suggest that they make some Galant specific bolt on fender flares and perhaps also some wide body door skins. Â*Also as far as other kit ideas, I wouldn't mind seeing an Octane kit for the 8G and some different hoods like a ram air.</div>

for the front end, the initial V or the cruz body kit will never fit the front like it looks while keeping the impact bars...the impart bars are too tall

http://pinoyesv6.galants.com/bah.jpg
http://www.eracings.com/catalog/images/bodykit-mitsubishi-galant-nms-fb.jpg
http://www.eracings.com/catalog/images/bodykit-mitsubishi-galant-9900-vr4-fs.jpg

[ewgiii]

oh, i wonder if there are any kits that allow u to leave it on?... or is there any way to use whatever is used on the JDM galants?

[Cali]

<div class='quotetop'>QUOTE(ewgiii)</div><div class='quotemain'><div class='quotetop'>QUOTE(cali)</div><div class='quotemain'>the urethane front you're talking about laz (the one you and i have) does indeed exsist but a word of warning. this bumper was orginally made for JDM galants and THERE ARE GAPS, even with JDM headlights. i really highly doubt that this bumper was fitted to a US spec galant so there will be crazy gaps and you wont be able to fill them in since fiberglass will not adhere to urethane. other wise, i would love to get it to.</div>

u missunderstood, it WILL fit US galants. I'm sending them another e-mail tonight. Keep the concerns coming, i sent them a link to this page.</div>

i wasnt trying to say it couldnt be done...all i was saying that there are already intial v fronts made of urethane. as far as the impact bar staying....there is no way it will fit without completely changing the bumper and making it look ugly.

[ewgiii]

oh, my bad

[Tiptronic]

you know i have been looking at this site for some time now trying to figure where i had seen all the stuff before, and realized that these two companies are one in the same, only with different names

http://www.speedzconcept.com/ ('http://www.speedzconcept.com/')

http://www.eracings.com/ ('http://www.eracings.com/')

contact info

http://www.speedzconcept.com/catalog/contact_us.php ('http://www.speedzconcept.com/catalog/contact_us.php')

http://www.eracings.com/catalog/contact_us.php ('http://www.eracings.com/catalog/contact_us.php')

man i thought i was losing it. just thought everyone should know when you same either of the names, youre talking about the same place!

[TITAN]

WHY DONT ALL OF YOU GO HERE...

http://www.clubtgc.org/forum/viewtopic.php?t=11688 ('http://www.clubtgc.org/forum/viewtopic.php?t=11688')

WE ARE ALREADY IN THE PROCESS OF A GROUP BUY ON A DIRECT U.S. BOLT INITIAL V KIT, AND JUST NEED TO FILL THE REMAINING SPOTS TO GET IT STARTED.

NOTE: IT IS NOT A URETHANE KIT. THE COST OF A URETHANE KIT COMPARED TO A FIBERGLASS KIT IS BETWEEN $200-500. FOR SOME THAT MAY NOT BE MUCH, BUT FOR OTHERS IT IS A GREAT DEAL. IF YOU REALLY THINK YOU ARE GONNA GET URETHANE KIT FROM ERACING.COM, THEN BE MY GUEST AND DISREGARD THIS POST.

(PARDON THE CAPS)

[Tiptronic]

they are not urethane kits from e-racing, and they are not direct bolt on. the kit thats sitting in my living room right now was bought from eracings/speedzconcept (whatever you want to call it ). ITS FIBERGLASS!!

[Niytrus]

the kit being made in the GB is also fiberglass, but it will be a direct bolt on, meaning you can do it at home rather than taking it in to a shop who is ganna charge your $1,000 + the price to get it painted. I would recomend the GB, but thats just my opinion, and I honestly do not see eracing/speedz concept making a poly kit, or any kit that will be a direct bolt on in the near future.