PDA

View Full Version : need help (turn singnal)



GFORCE99
02-02-2003, 12:50 AM
whats up, here's my prob I installed my side makers with no problem all the lights worked fine, after a couple weeks I notice when I went to hit the lever for the right side it blinked fast which usually means the some light is out. I checked all the lights they are all lit but the right front side is dim, so I put in some nice hyper white lights still that side was dim allitle brighter and blinked fast, whats do you think is going on?

Wintergalant
02-02-2003, 01:52 AM
try putting a heavy duty flasher in see if that helps

Ada
02-02-2003, 02:19 AM
1) Take out the bulb.
2) Get a screwdriver.
3) Look inside the housing to find the 2 metal parts where the bulb's filaments are supposed to touch.
4) Use the screwdriver to bend the metal upwards.
--Basically, you want to make sure you bend the metal things enough to where they will get a SOLID connection to the bulb's filaments.
5) Put in bulb.

Voila`. Fixed! :roll:

BlueESV6
02-03-2003, 02:18 PM
Nothing is grounding out is it? Sound like others have said either the contacts are not touching or may be grounded out....recheck your wiring again.

https://www.thegalantcenter.org/style_emoticons/default/smile.gif

GFORCE99
02-04-2003, 12:08 AM
thanks, i looked at the wiring it was the neg.