PDA

View Full Version : 9005 bulbs question



jfstreetcustoms
03-08-2009, 11:30 AM
I came across these HiPro Power 5900K halogen bulbs. Will they fit in my G?

littlerick
03-08-2009, 12:09 PM
i think we use 9003 or h4 bulbs

03-Galant-ES
03-08-2009, 12:35 PM
educate
https://www.thegalantcenter.org/showthread.php?t=14195

check posts in general info for parts questions then post your question if you cant find it we dont mind helping you just sometimes help yourself ;)


9005s are usualy for cars that have a separate high beam 9006 usually for the high you would have to change a lot to get them to work. peace.

jfstreetcustoms
03-08-2009, 01:59 PM
so could i modify the 9005s to fit?

03-Galant-ES
03-08-2009, 02:15 PM
you would have to get a harness or wire a 9005 bulb socket into your low beam wires and a 9006 socket into your high beams and then you would have to modify our housing so that the 2 bulbs could be mounted so probably dremel 2 holes into them and get the mounting holes from a car that has 9005 and 9006 stock then attatch them either by melting them in, or a type of glue or sealant that is strong. Then pop them in and away you go. If you want colored bulbs so bad they make H4s colored.

Isnt 5300k like hyper white they make piaas or sylvania siverstars in hyper white. Check your local auto part store its easier.

Jeffylou87
03-08-2009, 03:36 PM
No.. You can't modify it.. Just get some high performance 9003/H4 bulbs.. Plus 9005's are high beam bulbs..

03-Galant-ES
03-08-2009, 06:29 PM
i knew 9006 and 9005 were high low wasnt sure which but he could modify it its jut a lot of work

Like I said in my post they make 9003 the same type too.