PDA

View Full Version : neon kit



galant4u
02-10-2003, 10:49 PM
Is it possible to install a neon kit on our cars witthout a body kit and not be able to see the tubes?

GaLaNtKeV99
02-10-2003, 10:52 PM
Yes and no. The side bulbs are hidden behind the "jack lip." Those arent a problem but the back and front is a little harder. The front can be placed almost inside the bumper. Ask Mrjaydeeone, thats how he put his.

NJ G-sta
02-10-2003, 10:56 PM
<div class='quotetop'>QUOTE(galant4u)</div><div class='quotemain'>Is it possible to install a neon kit on our cars witthout a body kit and not be able to see the tubes?</div>

As far as i know its possible to put a underbody neon kit on your car. The only problem is hardly got space to slip the neon tube to hide. Therefore only the rear will expose the tube. For the front, i put it in between the enforcement bar, so that it shine top to buttom grill. However, it ain't shining thru to the floor due to the plastic piece blocked the light. For the side, the side rail actually cover the neon up and there is no way u can see at the side,unless u angle up from below.
http://www.tgcnj.com/2kgalant/IMG_0205.jpg

http://www.tgcnj.com/2kgalant/IMG_0288.jpg

GaLaNtKeV99
02-10-2003, 11:06 PM
<div class='quotetop'>QUOTE(mitsugalant2kNJ)</div><div class='quotemain'><div class='quotetop'>QUOTE(galant4u)</div><div class='quotemain'>Is it possible to install a neon kit on our cars witthout a body kit and not be able to see the tubes?</div>

For the front, i put it in between the enforcement bar, so that it shine top to buttom grill. However, it ain't shining thru to the floor due to the plastic piece blocked the light.

http://www.tgcnj.com/2kgalant/IMG_0205.jpg

http://www.tgcnj.com/2kgalant/IMG_0288.jpg</div>

How did you get the bulb in there.

NJ G-sta
02-10-2003, 11:11 PM
what i did was, slip the neon tube from under where the bumper cover is . Then slowly slide it up in between the enforcement bar. I remember i have to remove the girlle and the left side headlight to make some room for the tube . After that i use those zip tie to tie it against the bar where in front of the radiator.

FLIPDVS
02-11-2003, 09:44 AM
Hey mitsugalant2kNJ, what brand of neons are you using. I like the color and the shine from them.

mrjaydeeone
02-11-2003, 10:51 AM
http://www.imagestation.com/picture/sraid35/pe314d49e09d92e3945ffc0da27cab304/fd28a36e.jpg
http://www.imagestation.com/picture/sraid35/p8a1f60c3f796a277a8d4f7287ea1cac8/fd28a36f.jpg
http://www.imagestation.com/picture/sraid35/p1a26efba98372e8368b10f107820cef3/fd28a371.jpg
and this is my end result
http://www.imagestation.com/picture/sraid33/peca67685b760d5c2f05645ce18bb56cd/fd3f86f2.jpg

NJ G-sta
02-11-2003, 12:30 PM
<div class='quotetop'>QUOTE(FLIPDVS)</div><div class='quotemain'>Hey mitsugalant2kNJ, what brand of neons are you using. I like the color and the shine from them.</div>
I use Low Glow Pro Series. I highly recommanded to anyone who wanna get brightest neon , Low Glow Pro Series actually out performed the Street Glow Gold Series underbody neon kit. Installation is pretty easy and straight forward. But from my experience, I'd suggest ya to fuse the wire from the battery to the switch. Also replace the wire!! The one comes with the kit wasn't good enough . They are weak!!!

Tazz2000
02-11-2003, 06:10 PM
I got some gutter gaurds and mounted mine to the bottom of the front bumper right up against the frame engine mount thing. You'll c it if you get down there. On the back, I just put electrical tape on half of the tube and angled it down to hit the ground. Haven't had any complaint's from the cops yet.

FLIPDVS
02-11-2003, 09:21 PM
Hey Jay
Just wondering what brand of fog and side marker lights are you using. Everything matches real good from the front.