2003 Acura TL wheels on 2000 Mitsubishi Galant fitment

[ChiGalant]

I was looking at some 2003 acura TL wheels they are 205/60 R16 5x114.3 oem wheels i want to put them on my 2000 Mitsubishi galant i have 195 65 r15 now, i need to know if the offset and fitment will be ok ok with my car without any problems,,,


thanks

[RedGalant2k1]

The tires are a little tall, but should fit, and the wheel bolt pattern is the same. Though I would suggest using factory Acura/Honda ballseat lugnuts. Otherwise you risk major potential issues using non-ballseat lugnuts.

The factory Mitsubishi lugs also will NOT work. Assuming you still have the wheels in your sig those lugnuts won't seat properly either. You need to buy proper ballseat lugnuts to mount safely to your car.

http://www.tradeunion.js.cn/images/faq10.jpg

You need lugnuts like the middle ones in the above picture.

[beam514]

well actually you might have problems with the hub. IIRC, Acura/Honda wheels have a smaller diameter hub than do Mitsubishi's, so the center hole in the wheel will be to small to fit on your hub, making it very unsafe

[lonestar22]

the center hub will be too small. u will have to run a minimum of a 8mm spacer to clear it

[ChiGalant]

Thanks guys . ill pass with those rims, but i found another set from mitsubishi gsx and they are 16 ... will these gsx be fine

http://www.cartype.com/pics/2859/small/mitsubishi_eclipse_gsx_94.jpg


and the tires would be 215 55 r16