View Full Version : Clean Corner
kondypl
07-24-2009, 03:39 PM
Can I have use this technic to clean corner in 7G?? and also do I have take whole bumper off in order to take out headlights?
stvn_mj
07-24-2009, 03:47 PM
I am not sure how the 7g headlights come out but in the 8G you just remove the grill and just unbolt the bolts holding them in. What technique are you talking about? Bake method? When I cleared my corners I just removed the bulb and broke the corner to get it out but when I opened up my heads I used a hairdryer to open them up. Took me about 15 min each headlight to open up and then I blacked them out.
spardavr4
07-24-2009, 03:58 PM
You don't have to remove the bumper to get to the headlights.
You don't have to remove the bumper to get to the headlights.
Yes, you do have to remove the bumper to get to the headlights. The bumper has 2 bolts each side to the fender and 4 bolts to the nose panel/remove grills/. Headlights have two bolts each behind the bumper, and 2 or 3 on top to the nose panel
What i did was, after removing the headlights, i stuck a long screw driver thru the corner light socket hole and hit it lightly with a hammer trying to crack the orange lense. Do it many times till its completely shattered and try pushing the pieces toward the headlight body and pulling them out thru the bulb sockets
kondypl
07-24-2009, 06:07 PM
sry guyz i forgot to post link https://www.thegalantcenter.org/showthread.php?t=8228 this technique
kondypl
07-24-2009, 06:10 PM
Yes, you do have to remove the bumper to get to the headlights. The bumper has 2 bolts each side to the fender and 4 bolts to the nose panel/remove grills/. Headlights have two bolts each behind the bumper, and 2 or 3 on top to the nose panel
What i did was, after removing the headlights, i stuck a long screw driver thru the corner light socket hole and hit it lightly with a hammer trying to crack the orange lense. Do it many times till its completely shattered and try pushing the pieces toward the headlight body and pulling them out thru the bulb sockets
this technique i was talking about! thanks! I removed bumper before when i was fixing my fender so i know how to take bumper off i was just wondering do i have to do it if i wanna take out my headlights , THANKS!
stvn_mj
07-24-2009, 06:11 PM
Thats on an 8G not sure if you can do it the same way on the 7g. I would think you can. Remove the corner bulb and see if you can reach the corner but I would pm mko or another member with a 7g. Good luck sorry I couldn't be of more help.
edit: guess you found your answer.
kondypl
07-24-2009, 06:12 PM
Yes, you do have to remove the bumper to get to the headlights. The bumper has 2 bolts each side to the fender and 4 bolts to the nose panel/remove grills/. Headlights have two bolts each behind the bumper, and 2 or 3 on top to the nose panel
What i did was, after removing the headlights, i stuck a long screw driver thru the corner light socket hole and hit it lightly with a hammer trying to crack the orange lense. Do it many times till its completely shattered and try pushing the pieces toward the headlight body and pulling them out thru the bulb sockets
and btw can i somehow get those bolts on he none panel without removing grills??? cuz i have those mesh grill glued with hot glue and silicone......
U can try going behind the nose panel and try to reach them with a ratchet, but IDK Ive never done it this way
spardavr4
07-24-2009, 07:20 PM
Yes, you do have to remove the bumper to get to the headlights. The bumper has 2 bolts each side to the fender and 4 bolts to the nose panel/remove grills/. Headlights have two bolts each behind the bumper, and 2 or 3 on top to the nose panel
What i did was, after removing the headlights, i stuck a long screw driver thru the corner light socket hole and hit it lightly with a hammer trying to crack the orange lense. Do it many times till its completely shattered and try pushing the pieces toward the headlight body and pulling them out thru the bulb sockets
Oh my bad, I seem to remember someone removing their heads from a 7G without taking off the bumper. My mistake!
bronxbombr
07-24-2009, 09:18 PM
you can go under the car and unbolt the 4 bolts on the frame. the whole bumper reinforment everything comes out all in one piece. Way easier than unbolting so many things.
kondypl
07-24-2009, 11:27 PM
i dont really get the picture 4 bolts and whole bumper is off?
Spartan251
07-26-2009, 03:15 PM
i pulled the whole bumper off to get to my headlights. and the baking method works awsome to get the headlights apart. 210 deg for 6 min is all it took. if all you are doing is removing the amber corner, do it this way. you can get it out and press back together before the silicone cools and only have to heat them up once.
Spartan251
07-26-2009, 03:18 PM
you can go under the car and unbolt the 4 bolts on the frame. the whole bumper reinforment everything comes out all in one piece. Way easier than unbolting so many things.
how do you get to the bolts with the bumper cover still on? the bolts for the crash bar on mine are under the cover. if you are talking about the 4 bolts for the headlights. it is a pain in the ass to get the light out with the bumper still attached.
kondypl
07-27-2009, 12:44 AM
idk how im gonna do it , for clean corners i guess i would just use flat screw driver but im thinkin about black housing
Spartan251
07-27-2009, 08:32 AM
the black housing looks real good. check out the tutorial for it. 4-grim has some good pics of his on there.
https://www.thegalantcenter.org/showthread.php?t=15179
bronxbombr
07-27-2009, 11:26 PM
i have a spare set for sale if anyone is interested :)
QnzMostWanted
07-28-2009, 08:59 AM
i guess i wrote this long ass tutorial a while ago for nothing
https://www.thegalantcenter.org/showthread.php?t=11090
kondypl
07-28-2009, 11:38 AM
i have a spare set for sale if anyone is interested :)
clean corners and black housing? PM ME PLZ
bronxbombr
07-28-2009, 09:21 PM
they are still on the car.heres the pix
http://i2.photobucket.com/albums/y28/bronxbombr/nreee004.jpg
http://i2.photobucket.com/albums/y28/bronxbombr/IMAGE_012.jpg
Spartan251
07-29-2009, 01:17 PM
damn those things need some polishing.
bronxbombr
07-29-2009, 11:28 PM
You bashing or you volunteering to do the job?
Spartan251
07-30-2009, 08:33 AM
just making an observation. i am actually polishing my own right now. literaly my headlight is in my lap as i type this
Galant306m
08-08-2009, 03:12 AM
i guess i wrote this long ass tutorial a while ago for nothing
https://www.thegalantcenter.org/showthread.php?t=11090
lawl nice.
kondypl
09-05-2009, 09:32 PM
Finally get clean corners done :):):)
http://img215.imageshack.us/img215/1648/090509192500.jpg (http://img215.imageshack.us/i/090509192500.jpg/)
http://img215.imageshack.us/img215/4260/090509201000.jpg (http://img215.imageshack.us/i/090509201000.jpg/)
bronxbombr
09-06-2009, 02:00 AM
Looks good.
kondypl
09-06-2009, 04:59 PM
Looks good.
thanks , but i did it with screw driver method. So still i didnt black them out......
Spartan251
09-08-2009, 08:29 AM
looks good.
vBulletin® v4.2.2, Copyright ©2000-2024, Jelsoft Enterprises Ltd.