compression

[Spartan251]

I just picked up another 7g for $400. clean title, straight body, power everything inside, clean interior, good motor, bad auto tranny. I plan on switching all my suspension parts over to it along with my 5spd. I want to do a compression test on both motors to see which one is better and that is the one I will go with. what compression should a stock 94 4g64 and stock 95 4g64 run? I am not sure if they are 7 bolt or 6 bolt.

[skrap]

They are both 7 bolt

[eksz]

Per the Haynes work manual, the galant's 2.4L SOHC engine's standard compression is 192 psi and the minimum compression is 145psi, jjj

[Spartan251]

awsome. I will be doing the test on both engines tomorrow.

[Spartan251]

did the test on both engines. the white one is running 175 accross the board.
the red is running 160 accross the board.
Looks like I will be sticking with the one out of my white one. makes the swap easier anyway. no need to change transmissions.