2nd gen VR4/Stealth TT rear brake conversion

[Bring380GT]

Just did my 2nd Gen Stealth TT/VR4 rear brake upgrade

only one shot for now
http://i46.photobucket.com/albums/f141/MagnaVR4/RearTTCaliper.jpg

[spardavr4]

Nice job, I need to do a rear disc swap too :sad:

[02redgalant]

nice always wondered if they worked

[mko]

Is that a bolt on for the Galant backing plates, ot you needed an adapter

[Bring380GT]

Is that a bolt on for the Galant backing plates, ot you needed an adapter

Yep, you just need a bolt alittle longer then stock and about 5 washers per bolt

[4g63lover]

Nice job, I need to do a rear disc swap too :sad:

me too.

[mko]

pics please, I need to see these washers. I can get the VR4 rear calipers for dirt cheap and the Evo ones are usually around 250 just for the rear

[Bring380GT]

pics please, I need to see these washers. I can get the VR4 rear calipers for dirt cheap and the Evo ones are usually around 250 just for the rear

Dude I know evo rears are $$, I'm pissed right now! my little bro took the camera! as soon as I get it back I will get you a picture of the washers, I did buy the washers from Napa FYI.

[phizzalot]

do you got the fronts to match bring250gt?

[Bring380GT]

do you got the fronts to match bring350gt?

VR4 4 piston calipers are way to big for our hub Knuckles, and our CV axles will not fit a 3KGT or VR4 hub knuckle

[showtime]

sorry to be off topic, but what wheels are those?

[Bring380GT]

sorry to be off topic, but what wheels are those?

Ryder G7s By:ADR, best 190 spend! :D

[Bring380GT]

What am I saying they are G6 wheels lol

[Ivory8g]

me too.

me three

[mko]

VR4 4 piston calipers are way to big for our hub Knuckles, and our CV axles will not fit a 3KGT or VR4 hub knuckle

Ive seen 3000gt vr4 front caliper bolt pattern is the same as Evo one, but IDK about the offset of the rotor. They should be the same, but i cant confirm.

Hres my car with VR4 calipers, but I cant clear the wheel. I need 1/2 inch spacer

http://i232.photobucket.com/albums/ee291/okm12346/DSC00202.jpg

[02redgalant]

Ive seen 3000gt vr4 front caliper bolt pattern is the same as Evo one, but IDK about the offset of the rotor. They should be the same, but i cant confirm.

Hres my car with VR4 calipers, but I cant clear the wheel. I need 1/2 inch spacer



huh how is that so...is that 1st or 2nd gen vr4 calipers....i've always seen 2g's that had to use a bracket to make them work even older galant vr4's

as for the caliper bolt pattern..i measured the evo brembo in my room and its about 6.25 inches from center of bolt hole to the other

[mko]

yes, I have the bracket and these are 2nd gen calipers. and Ill measure the distance between the bolt holes tomorrow, see if it matches, im pretty sure it does

[Bring380GT]

Ive seen 3000gt vr4 front caliper bolt pattern is the same as Evo one, but IDK about the offset of the rotor. They should be the same, but i cant confirm.

Hres my car with VR4 calipers, but I cant clear the wheel. I need 1/2 inch spacer

http://i232.photobucket.com/albums/ee291/okm12346/DSC00202.jpg

really? because my stealth TT one is hella huge compared to my hub knuckle, now that picture is it bolted to your cars hub knuckle right?

[mko]

No its not. It has an adapter bracket. Ive seen the picture of the JDM knuckle which is 160mm/6 1/4''/ with vr4 calipers bolted to it, and the same knuckle with Evo caliper, somewhere on DSMTuners

[Bring380GT]

No its not. It has an adapter bracket. Ive seen the picture of the JDM knuckle which is 160mm/6 1/4''/ with vr4 calipers bolted to it, and the same knuckle with Evo caliper, somewhere on DSMTuners

I would love to see that :)
because this is what I get LOL
http://i46.photobucket.com/albums/f141/MagnaVR4/VR4Calipernogo.jpg

if you could show me I would like to do this to my car, but I can't get around this problem

[mko]

Are you sure this is an 8g hub, and its not a 3000gt sl or 1g eclipse hubs