PDA

View Full Version : Temperature switch stopped working


tcharger130
03-08-2010, 08:23 AM
My temperature switch has stopped working. The cable with the circle attachment is still attached to the temperature part, so I assume that the cable broke, or came off of what ever it attaches to on the other end. Does anyone know what it attaches to on the other end?

Also, when I start my car it squeals like a bitch, what needs to be replaced?

Thanks.
varroa
03-12-2010, 10:02 AM
on my galant i had squealing after i replaced the service belts. i strongly believe it was the one that drives the water pump and the generator.

try tightening both service belts one by one, and see if the squealing will be gone. start with the water pump belt.
varroa
03-12-2010, 10:15 AM
on my galant i had squealing after i replaced the service belts. i strongly believe it was the one that drives the water pump and the generator.

try tightening both service belts one by one, and see if the squealing will be gone. start with the water pump belt.