Ok this is getting old

[GTZ2002]

So my car turned up 3 codes the EGR valve, 4th cylinder misfire, and the cam shaft position sensor well I replaced the EGR and the cam shaft sensor and the 4th cylinder went away after that. Now it is say the EGR valve circut is malfunctioning what is that the EGR is not attached to anything electrical PLEASE HELP! I just want my car fixed with out taking it to the mitsubishi dealership and have to pay an arm and a leg to just find the problem when I know what the problem is. Thanks for any replies

[M-Rod]

You're in Apple Valley? How about this. If you're not busy this Sunday, I'll come down that way and check it out. I'm sure it's just a solenoid.

[JT00galantev]

I had that same code come up on a scan I did on my G and all I did was put in a quart of fuel injection cleaner on my next fuel fill up and that solved my issue with that egr code. Hope that helps.