Horn Button

[bobmundo123]

Hey there guys. I tried searching on the forums and on google but i couldn't find anything that could really help me. This is the back story.

I bought this galant used last summer with a bunch of mods to it already done. One of which was the guy put in a chrome flame steering wheel. So that being not safe went on Ebay, Bought the OEM Steering Wheel, AirBag, And clockspring. After that I officially had an airbag and a horn! Then a lilttle bit later on The Horn would just go off randomly when i turned on the car or while i was driving. VErdict.. Unsafe, so i disconnected the horn ( im assuming the wire between horn and relay box). So i Went online and bought a horn button. Now I don't know how to Install this without going all crazy and removing the steering wheel, because i didn't instal that, it was my old mechanic who i no longer really see.

I'll post some pick of the area i was working with to try and see what i can do to identify the right wires to mess with. I really couldn't find out what to do. i checked by the relay box but i was honestly soo confused. So here are some Picks And Thanks So much guys.

OooPps h.o a bit for the piks.. currently uploading..

http://img.photobucket.com/albums/v243/bobmundo123/GALANT%20WIP/2010-04-04124641.jpg

http://img.photobucket.com/albums/v243/bobmundo123/GALANT%20WIP/2010-04-04124650.jpg

http://img.photobucket.com/albums/v243/bobmundo123/GALANT%20WIP/2010-04-04124658.jpg

http://img.photobucket.com/albums/v243/bobmundo123/GALANT%20WIP/2010-04-04124713.jpg

http://img.photobucket.com/albums/v243/bobmundo123/GALANT%20WIP/2010-04-04124723.jpg

http://img.photobucket.com/albums/v243/bobmundo123/GALANT%20WIP/2010-04-04124734.jpg

http://img.photobucket.com/albums/v243/bobmundo123/GALANT%20WIP/2010-04-04124739.jpg

[Jeffylou87]

Before you go through all that trouble, make sure that the horn itself is properly grounded/secured to the chassis. There's only one wire going to the horn and it's a + wire. The horn gets grounded by being mounted to the chassis.

[bobmundo123]

Before you go through all that trouble, make sure that the horn itself is properly grounded/secured to the chassis. There's only one wire going to the horn and it's a + wire. The horn gets grounded by being mounted to the chassis.

Yea man, It already is grounded. I mean the horn was working fine, What wasn't working was the button in the airbag. It was a contact issue with the button. Which is why i purchased the new button..

I'm just lost as to where to find that one wire. As soon as i find that, Id connect it to the button then ground to chasis...

Its very simple to do. I just have to find that wire.