PDA

View Full Version : Inner tir rod socket.. Recall???


Galant Ryder
03-04-2003, 09:37 PM
i want to know if the inner tie rod socket is under recall because i went to get my inspection done and they said i failed because theres some play in the front driver side wheel. is that under recall or am i gonna have to come out my pockets again to fix this?? any idea how much for the piece and to put it in?
JiP
03-04-2003, 10:35 PM
hehehe you could take it to my guy in brooklyn, they dont checka damn thing, just throw ur shit on the dyno and snif test it.
IllestGalant
03-05-2003, 01:09 PM
becareful jip, don't go around shouting that, wouldn't want your boy to get slammed with 500,000 dollars in fines like some places I know have
MidNightRacing
03-05-2003, 02:44 PM
<div class='quotetop'>QUOTE(IllestGalant)</div><div class='quotemain'>becareful jip, don't go around shouting that, wouldn't want your boy to get slammed with 500,000 dollars in fines like some places I know have</div>
$500,000? Whoa I aint got no chanse on trying to bribe a shop then :x when I got my shit fully done :cry:
JiP
03-05-2003, 04:41 PM
<div class='quotetop'>QUOTE(IllestGalant)</div><div class='quotemain'>becareful jip, don't go around shouting that, wouldn't want your boy to get slammed with 500,000 dollars in fines like some places I know have</div>

hey theyre doin illegal shit they desrve it not my prob. but i didnt say the name of the place anyway.
JiP
03-05-2003, 04:44 PM
<div class='quotetop'>QUOTE(MidnightES)</div><div class='quotemain'><div class='quotetop'>QUOTE(IllestGalant)</div><div class='quotemain'>becareful jip, don't go around shouting that, wouldn't want your boy to get slammed with 500,000 dollars in fines like some places I know have</div>
$500,000? Whoa I aint got no chanse on trying to bribe a shop then :x when I got my shit fully done :cry:</div>

The shop gets the fine not you lol. Besides there are no bribing over here they just dont do shit on thier own. Only good for inspections if you take your car there for anything else you'll get completely ripped off and a really half ass job done.
IllestGalant
03-05-2003, 10:28 PM
alright, i was just warning you. I have talked to somebody whose job is to bring there car in for inspection for NY state. They weld the ball of the PCV to the housing so if the tech actually did inspect it, they would find it doesn't rattle and needs replacement. Also they have a reverse light out. If the shop passes them, the tech gets his liscense revoked and the shop gets fined... BAD!
JiP
03-06-2003, 02:05 AM
Well not for nuthing thats exactly what should happen. I mean believe me if anyones gona fail an inspection it would be me I dont want them checkin shit at all. But in reality thats their job by law.

I didnt know you could fail inspection for too much play in the wheel.
fstrthnu
03-19-2003, 12:21 PM
I just had to replace my inner and outer tie rod ends on the driver's side b/c they had some play in them. It cost me $80 and about 2 hours in my driveway. Pretty simple job...make sure to have it aligned when your done, that or count the threads https://www.thegalantcenter.org/style_emoticons/default/biggrin.gif like I did.
bronxbombr
03-19-2003, 02:50 PM
I can get it done at 3 different places in the Bx. 80bux, hell dont even bring your car just your registration. https://www.thegalantcenter.org/style_emoticons/default/laugh.gif https://www.thegalantcenter.org/style_emoticons/default/laugh.gif https://www.thegalantcenter.org/style_emoticons/default/laugh.gif https://www.thegalantcenter.org/style_emoticons/default/laugh.gif https://www.thegalantcenter.org/style_emoticons/default/laugh.gif

I call it the NO CAR INSPECTION.