How to: Install OEM 94-96 Accord Lip on a 7G

[G-spot]

OP Notes: Yeah like the title states, it was a hit or miss project randomly created by me. I used Warren's 7gB front bumper even though I originally tested on a 7gA bumper (at a junkyard). If you're wondering about the 8g then yes, it does fit 8g there's a tutorial for that lol!

How to: Install OEM 94-96 Accord Lip (CD5) on a 7G

EDIT***: I test fitted this lip on a 7Ga bumper (again) and it fits

Before we get started, I need to let you guys what lip I'm talking about.....
http://memimage.cardomain.com/ride_images/3/3345/3841/33361920003_large.jpg

This is an oem lip (or front underspoiler as depicted in this picture) found in 1994-1996 Honda Accord sedan & coupe models. You can find this lip at junkyards across the country and you can snatch one for a good price of $12-30 depending on the location. All you need is a 10mm and a 12mm socket and it takes 10 minutes to remove.

Here's what you need:
http://i70.photobucket.com/albums/i98/clubtgc/DSCN3069.jpg
- Front bumper from a USDM 7G (1994-1998)
- some sort of cutting tool (Dremel, power cutter, heavy duty scissors) (omit that not necessary)
- double sided tape
- about 16 lathe screws /w washers
- Phillip head screwdriver/drill head



NOTE: You do not need to cut the upper tab. You need it to screw in under the bumper.
http://i70.photobucket.com/albums/i98/clubtgc/DSCN3071.jpg
EDIT***: I discovered not to cut the entire top tab to make it fit since it was designed as an underspoiler.


http://i70.photobucket.com/albums/i98/clubtgc/DSCN3073.jpg
We added double sided tape and then laced it with screws. Since it was a 95% fit no heat gun is necessary like a Mugen lip would.

And wala.... it fits


http://i70.photobucket.com/albums/i98/clubtgc/DSCN3206.jpg
http://i70.photobucket.com/albums/i98/clubtgc/DSCN3229.jpg
http://i70.photobucket.com/albums/i98/clubtgc/DSCN3221.jpg

http://i70.photobucket.com/albums/i98/clubtgc/DSCN3080.jpg
http://i70.photobucket.com/albums/i98/clubtgc/DSCN3081.jpg
http://i70.photobucket.com/albums/i98/clubtgc/DSCN3082.jpg

[raks_22]

hoo nice, anyone have done it whit the 94-96 bumper?

[warren]

yes look different because you bumper it strait it may just goo in better

[Exhaust power]

since this lip^ fits then the 4 gen(92-96) honda preludes lip will fit as well. since those luders run a lot of accord lips with barely any modification.

[warren]

maybe give it a try

[G-spot]

hoo nice, anyone have done it whit the 94-96 bumper?

Yes, if you notice on the "OP Notes" it was mention that I first test fitted with the 94-96 bumper. It actually fits better than the 97-98 bumpers.

[justin]

i cant find that lip NO WHERE =(... btw sides on accord fit?

[Spartan251]

I have been running this lip on my 7g for almost 3 years now. Install on a 7ga bumper is super easy as well.