my new style VR4 bumper modification

[Dominicano]

I decided that i wanted to go a different route with the VR4 bumper. I haven't seen anyone do this so wish me luck :-)

Stage 1
cut out the pieces I did not want :087:. Have to finish sanding it a bit more for the adhesive. its a little flimsy in the middle but when I am not working on it i attached the plastic grill so when I move it I do not put a lot of tension anywhere. Once completed the metal mesh should give it more rigidity.

http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/IMG_0403-1.jpg

once I finish sanding the area for the adhesive to stick to it I will then post up some more pics.

update:

I started doing the bumper did the top part of the license plate. sorry I did not get to take pictures when I put up the mesh. I basically used the material used for windows in the metal form. i cut a piece out and held in it place with some glue I got from hobby lobby, once I got it i used the SEM plastic repair to hold it in place then started working on it. with the stuff i used its thicker than syrup but it seeped through on the bottom i am doing the metal mesh but will add a piece of fiberglass to help with retaining the material. i am also trying to attack the bottom differently cause since I have no support it has opened up a little so I have to make sure its the right shape. Also the middle piece is a little lower then the outside piece.

it looks like a big ol mess lol
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3859.jpg
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3858.jpg
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3857.jpg
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3856.jpg

now its taking form after 20 minutes at 80 grit with orbital sander
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3867.jpg
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3864.jpg
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3863.jpg
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3862.jpg
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3861.jpg
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3860.jpg

Cleaned it up with plastic cleaning spay i am right on point as I can see the plastic so the shape is on point
have to fill the voids so going to fill it up then proceed to sand it again.
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3868.jpg


I had only bought two bottles so the bottom will have to wait until that comes in.

[Corey2kG]

I wanna see this good luck.

[OMEGA PHX]

NICE, hope to see it soon, it's going to look Hot!!!!!

[G-spot]

Looks good. You should add a long thin metal plate behind the cutted areas to keep the bumper from excessive flexing .

[ricky_db]

interesting
much luck

[Stewi]

Cant wait to see the finished product Rich, hey call me when you get a chance, I found those tweeter covers you wanted.

[Isaurio]

Is fiber glass or original OEM? Good luck with it. Also i'm working on my VR4 bumper "OEM" Right now body work is done. Is sitting on primer for a few days. Monday or Tuesday it should be painted.

[Dominicano]

Thanks guys, the bumpet is oe, i plan to put little post in the back of it so it can hold the mesh with screws much like the oe grill for this bumper.

[mrjaydeeone]

Nice Rich, can't wait to see the finished bumper

[GOOSEY2099]

Very nice Rich! Good luck!

[IVORY_G]

Progress?

[Corey2kG]

^+2

[ricky_db]

you probably got this worked out already but since its oe plastic you could try whipping up some ABS sludge

[Dominicano]

no progress as of yet. I been so busy with school and work I have not been motivated to work on it. i got everything i need just have to find time to do it.

[Dominicano]

you probably got this worked out already but since its oe plastic you could try whipping up some ABS sludge

abs sludge? you mean melt the plastic that is left? won't it become brittle? but i got two tubes of abs adhesive.

[ricky_db]

you take a sheet of abs plastic and grind it up or cut it up into small pieces then yoou mix it with acetone in sealed bottle, let it set overnight and it turns into a sludge paste. it takes time to work with it though

[IVORY_G]

What are you planning to fill the gap up with for the license plate delete? I bought my bumper from RAZ_76 who did a license plate delete on it (which I always said I would do if i ever bought a JDM bumper, LOL!) by cutting out the section like you did, and then cutting a piece of another donor bumper to fit the missing section on the JDM one and merged them together. Its very strong and looks and feels OEM...

[ricky_db]

kick!

wheres the wrk man i want to do this

[IVORY_G]

kick!

wheres the wrk man i want to do this

X2

[Stewi]

if you look at my body work thread from 3 years ago, I cut a piece from another bumper and plastic welded it in and bonded it with SEM plastic repair epoxy. There are some pics in that thread.

[Galantman03]

I was thinking about doing this... didn't feel like cutting up a rare bumper lol. didn't cali make these? what happened to them?

[ricky_db]

I was really wondering if he gave up on it or not so I can buy it from him lol I want a new project after I finish my trunk

Sent from my android using tapatalk

[qcustoms]

i made a mold of the Facelift bumper and shaved the tow hook eye cover,the number plate surround and some the fogs and made custom items .
some house the factory spots,some house the PFL Fogs and some,just custom
http://i1178.photobucket.com/albums/x370/vr4wgn/DSCF1744-1.jpg
http://i1178.photobucket.com/albums/x370/vr4wgn/DSCF0085.jpg
http://i1178.photobucket.com/albums/x370/vr4wgn/DSCF3408.jpg

[jonry]

i made a mold of the Facelift bumper and shaved the tow hook eye cover,the number plate surround and some the fogs and made custom items .
some house the factory spots,some house the PFL Fogs and some,just custom
http://i1178.photobucket.com/albums/x370/vr4wgn/DSCF1744-1.jpg
http://i1178.photobucket.com/albums/x370/vr4wgn/DSCF0085.jpg
http://i1178.photobucket.com/albums/x370/vr4wgn/DSCF3408.jpg

thats so clean!!!!!!

[Dominicano]

school been keeping me busy and the fact that I am not painting her yet has not been a priority for me.

i do plan to do it after school finishes in 2-3.

If i do sell it to you its going to be at the same price that I bought it for with shipping from japan lol, but I'll get'r done lol

[ricky_db]

school been keeping me busy and the fact that I am not painting her yet has not been a priority for me.

i do plan to do it after school finishes in 2-3.

If i do sell it to you its going to be at the same price that I bought it for with shipping from japan lol, but I'll get'r done lol

Shhhhit lol how about we swap bumpers lol

Sent from my android using tapatalk

[ricky_db]

Sent from my android using tapatalk

[Dominicano]

started the top check out the pictures in the first page.

[beam514]

looking really good, I never heard of this technique.. but I'm not a body guy haha. Well, now I know!

btw, nice ladde... er I mean work bench lol

[Galantman03]

dang looks good man, where can you find that stuff SEM?

[Dominicano]

looking really good, I never heard of this technique.. but I'm not a body guy haha. Well, now I know!

btw, nice ladde... er I mean work bench lol

the ladder works lol. and this is my first time doing it so i am far from a pro. i seen them do it on smaller holes but using the screen in metal it helped keep the shape. just think liquid nails but a little flexible, once cured its solid.

[Dominicano]

dang looks good man, where can you find that stuff SEM?


you can search the web for SEM 39767 i bought it from http://directbuyautobodysupply.com. once you see the container you will see that a special dispenser is needed. i found mine on ebay here is what it looks like

http://cgi.ebay.com/Dual-Mix-Applicator-Gun-SEM-7-oz-/130529909924?pt=LH_DefaultDomain_0&hash=item1e64305ca4#ht_500wt_1156

[IVORY_G]

Nice progress! Im sure it will look great when your done.

[Stewi]

Nice work Rich, glad the SEM worked out for you.

Guys, this is the same stuff I used when I shaved my JDM license plate pocket. I actually cut a piece of bumper from another car and then used the SEM product and metal mesh to bond them and fill in the gaps. The only thing I can forewarn you on is this, prior to priming/painting, let a body shop bake the bumper in the paint booth for one or two heat cycles, if any of the SEM product didnt fully cure, it will produce bubbles in the plastic material. I didnt do this, and the bubbles came up when my clear coat was curing, needless to say I had to strip the paint and re-fill the pinholes from the bubbles.

[Dominicano]

Nice work Rich, glad the SEM worked out for you.

Guys, this is the same stuff I used when I shaved my JDM license plate pocket. I actually cut a piece of bumper from another car and then used the SEM product and metal mesh to bond them and fill in the gaps. The only thing I can forewarn you on is this, prior to priming/painting, let a body shop bake the bumper in the paint booth for one or two heat cycles, if any of the SEM product didnt fully cure, it will produce bubbles in the plastic material. I didnt do this, and the bubbles came up when my clear coat was curing, needless to say I had to strip the paint and re-fill the pinholes from the bubbles.

yeah you ended up using less, i used almost 2 of those bottles lol, buts its worth it though.

you think leaving it out in the texas sun for day will do it good ? its gets hot down in this MotherFucker lol

[Stewi]

that might work if its out in the direct sun for a day or two. A good paint booth with get up to about 150-170 degrees, texas aint that hot. LOL

[Galantman03]

^ stick it in the g with the windows up, bingo, problem solved lol

[Dominicano]

^ stick it in the g with the windows up, bingo, problem solved lol


bingo lol the car is always outside now and its black lol

[IVORY_G]

Whatever happened to this???

[Dominicano]

its still a work in progress :-) i just need to get off my butt and finish the bottom part.

[RAZ_76]

I decided that i wanted to go a different route with the VR4 bumper. I haven't seen anyone do this so wish me luck :-)

Stage 1
cut out the pieces I did not want :087:. Have to finish sanding it a bit more for the adhesive. its a little flimsy in the middle but when I am not working on it i attached the plastic grill so when I move it I do not put a lot of tension anywhere. Once completed the metal mesh should give it more rigidity.

http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/IMG_0403-1.jpg

once I finish sanding the area for the adhesive to stick to it I will then post up some more pics.

update:

I started doing the bumper did the top part of the license plate. sorry I did not get to take pictures when I put up the mesh. I basically used the material used for windows in the metal form. i cut a piece out and held in it place with some glue I got from hobby lobby, once I got it i used the SEM plastic repair to hold it in place then started working on it. with the stuff i used its thicker than syrup but it seeped through on the bottom i am doing the metal mesh but will add a piece of fiberglass to help with retaining the material. i am also trying to attack the bottom differently cause since I have no support it has opened up a little so I have to make sure its the right shape. Also the middle piece is a little lower then the outside piece.

it looks like a big ol mess lol
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3859.jpg
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3858.jpg
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3857.jpg
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3856.jpg

now its taking form after 20 minutes at 80 grit with orbital sander
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3867.jpg
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3864.jpg
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3863.jpg
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3862.jpg
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3861.jpg
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3860.jpg

Cleaned it up with plastic cleaning spay i am right on point as I can see the plastic so the shape is on point
have to fill the voids so going to fill it up then proceed to sand it again.
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/MGP3868.jpg


I had only bought two bottles so the bottom will have to wait until that comes in.

I was the first one to ever do that too, after Stewi..lmao. Few people on the website have the bumper I did, Polishmafia and Ivory_G..

[spdracr]

i do remember ray being the first one to do it

here is mine unfinished as well

http://i233.photobucket.com/albums/ee131/spdracr83/71938_1415721044842_1587085096_954447_3944625_n.jp g

i have a hairline crack that i cant get rid of on the very top

thats my first jdm bumper, i have another one installed on the car but left stock

[Dominicano]

i do remember ray being the first one to do it

here is mine unfinished as well

http://i233.photobucket.com/albums/ee131/spdracr83/71938_1415721044842_1587085096_954447_3944625_n.jp g

i have a hairline crack that i cant get rid of on the very top

thats my first jdm bumper, i have another one installed on the car but left stock


i got a hairline crack on the bottom since I don't have the support there anymore so I added more of the epoxy in the back to make the bottom stiffer and it worked out my crack was right in the middle of the material and the actual bumper after i sanded it down.

[spdracr]

I cut out a piece of the stock bumper and used a heat gun to get the right curve on it then used 3m proxy and filler.

[IVORY_G]

its still a work in progress :-) i just need to get off my butt and finish the bottom part.

Well then get to work! LOL!

[Dominicano]

she is complete :-) after months or procrastinating i finally finished it, need to put some mesh on that I got install in on Thursday and she goes to get painted along with the whole car starting Friday also getting that crash in the rear of my car fixed. Going from black to different color.

http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/e4a7b29b.jpg

http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/f418550c.jpg

With installed fogs:

http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/4ebcf971.jpg
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/9bf7f517.jpg

got it as good as possible the body man can deal with the rest :-)
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/01213117.jpg

not pretty from the back, i managed to take the grill points where the original screws use to go on and bonded it to the top and bottom so I can use screws to hold the mesh with.
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/8568b087.jpg

[dknight3]

good work!
must see installed.

[IVORY_G]

Looks sooo good! I like it much better than the original!

[doctor]

Looks great!

[Skyforger]

I really like that! Much cleaner!

But just curious, is the bumper more flimsy without the support in the middle anymore?

[spdracr]

What kinda epoxy is that?? Something u buy at the paint supply store?? I need that for my bike cuz I have to fix the plastics on it.

Looks good from the back though even though u say it looks messy.

[Dominicano]

What kinda epoxy is that?? Something u buy at the paint supply store?? I need that for my bike cuz I have to fix the plastics on it.

Looks good from the back though even though u say it looks messy.

its a product called SEM plastic repair 39767 , i still got a full bottle left and the applicator gun for it. But i had to get it this way cause i had a lot of area to fill as I used closed to 3 bottles for this bumper. how big is the problem cause they sell a smaller size like this one http://www.levineautoparts.com/sembure.html if you need more area to fill then you might need a full bottle check that site out they show you the products they have and what product works with what plastic.

when the temp outside is hotter the product is more fluid so when i had done the first part its dripped easily, but once you get that first layer let it get hard then added the big layer. but during the first layer i had to smear it on the screen it dripped lol most of it on the cardboard i had on the floor lol.

[Dominicano]

I really like that! Much cleaner!

But just curious, is the bumper more flimsy without the support in the middle anymore?


its more rigid now considering i put more of the epoxy in the back since there was a plastic strip left after i removed the parts I did not need. the bottom was a little more challenging cause if you never notice the middle piece of plastic between the pillars is actually lower then the two sides. I had to heat it up and bring it up to the level of the other two. Even thought I got it up to eye level i still had to add epoxy to make sure it was all even and that part is more rigid then before.

[qcustoms]

Tricky attempt lol but unfortunately no punt intending but you know 1 warm day or 1 slight shunt and all that effort will simply de laminate..but good idea..you'll notice the base sag as well after a while

[Dominicano]

Tricky attempt lol but unfortunately no punt intending but you know 1 warm day or 1 slight shunt and all that effort will simply de laminate..but good idea..you'll notice the base sag as well after a while


the area behind it loaded with aluminum mesh as the base, after i am done I will be having mesh all being held at the by screws, and not chicken wire mesh the good stuff. don't really see it sagging and the material it self has flexibility i would have to bend it at 45 or more to make it break. believe me its rigid my orbital sander is a bit taller then the opening and i had to push the bottom down a little just to get it in there.

[qcustoms]

Lol good to hear lol, hope it holds out, don't be afraid to mold it tho man. Much better knowing for you in the end it's 1 piece no filler

[Dominicano]

Lol good to hear lol, hope it holds out, don't be afraid to mold it tho man. Much better knowing for you in the end it's 1 piece no filler


really don't know whats so funny, and don't really know what you mean by molding it into one piece. thanks for the heads up:017:

[spdracr]

its a product called SEM plastic repair 39767 , i still got a full bottle left and the applicator gun for it. But i had to get it this way cause i had a lot of area to fill as I used closed to 3 bottles for this bumper. how big is the problem cause they sell a smaller size like this one http://www.levineautoparts.com/sembure.html if you need more area to fill then you might need a full bottle check that site out they show you the products they have and what product works with what plastic.

when the temp outside is hotter the product is more fluid so when i had done the first part its dripped easily, but once you get that first layer let it get hard then added the big layer. but during the first layer i had to smear it on the screen it dripped lol most of it on the cardboard i had on the floor lol.

I have few different pieces to work on so a small bottle won't be enough. How much is the applicator gun for that cost??

[Reelax]

looks cool bro! can't wait to see finished results!

[Dominicano]

I have few different pieces to work on so a small bottle won't be enough. How much is the applicator gun for that cost?? they cost about 50-60, i won't sell it to you for that much though, send me a pm if you want to buy we can work something out with one of the bottles that I have left.

[Dominicano]

alright been at it for a few hours making sure everything is right, the bumper is in the car, mesh is in, fogs are in and they goes to get a whole paint job should be done in about 2 weeks.

http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/658c0173.jpg

http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/18f19e96.jpg

[Redhaze]

looks real good nice job

[Dominicano]

thanks everyone i am excited that she is finally getting painted and she needs it lol

[Skyforger]

I'd at least put a few coats of primer on that bumper, not a good idea to leave the patchwork exposed while you drive it.

[Dominicano]

I'd at least put a few coats of primer on that bumper, not a good idea to leave the patchwork exposed while you drive it.


i just put it on last night, its going straight to the paint shop in an hour.

[spdracr]

Looks good. Why didn't u mold the center piece in?? I'm thinking about doing mine too. I haven't made up my mind yet lol

[Dominicano]

you know i did not think of that until you mentioned it lol, I like that look, i told the body shop when they finish panting it in to rivet the piece to the bumper so it does not fall off.

[wetamup2k3g]

Very dope, love the creativity of it all!

[Skyforger]

Can't wait to see it painted. Makes it look inviting for an intercooler in the future. ;)

[Dominicano]

Can't wait to see it painted. Makes it look inviting for an intercooler in the future. ;)


:thumb_rsvd:

[ricky_db]

congrats to finishing her up man looks good aswell

[IVORY_G]

IDK why when I looked @ this pic:
http://img.photobucket.com/albums/v289/dominicano/Bumper%20modification/658c0173.jpg

I thought of this:
http://www.supanet.com/animation-animated-films-childrens-kids--aardman--wallace-and-gromit-10273056.jpg

LOL!

I still think it looks dope, but for some reason that "Wallace and Gromit" cartoon popped into my head LOL!

[Dominicano]

haha maybe i will name her wallace now lol

[doctor]

Great work! Congratulations!
You may need Bracket CLIP,FR BUMPER to finish this bumper

[Dominicano]

Great work! Congratulations!
You may need Bracket CLIP,FR BUMPER to finish this bumper
i have it. i did not want to lose it while driving

[wetamup2k3g]

LOLOLOLOL @ Will, you a fool for that one homie!!

[Skyforger]

Great, now I see the resemblance. lol

[IVORY_G]

Lmao!

[GalantBen]

looks pretty cool for a stock bumper

[Dominicano]

well she is back from paint check it out

http://img.photobucket.com/albums/v289/dominicano/fresh%20paint/98178f10.jpg
http://img.photobucket.com/albums/v289/dominicano/fresh%20paint/12c0c864.jpg
http://img.photobucket.com/albums/v289/dominicano/fresh%20paint/eb8458d6.jpg
http://img.photobucket.com/albums/v289/dominicano/fresh%20paint/2ee769f1.jpg
http://img.photobucket.com/albums/v289/dominicano/fresh%20paint/b12bd8c6.jpg
http://img.photobucket.com/albums/v289/dominicano/fresh%20paint/b07f7c45.jpg
http://img.photobucket.com/albums/v289/dominicano/fresh%20paint/7310888e.jpg

now the bad part bottom modification cracked. When i saw the bumper a few days ago it was fine and they had it on the car without the mesh then when i went to pick her up today i feel the forced it to much and it cracked at the seems where put them together to the point that it tore up the aluminum mesh that I used to hold it together. I could not leave the car cause I need a car to drive and need to leave the rental. But when I get back from my trip to NYC he will fix it for me so I am no sweating it.


http://img.photobucket.com/albums/v289/dominicano/fresh%20paint/e35373ae.jpg

[oakrdrs187]

Couldn't tell until you pointed it out. Looks really good.

[spdracr]

Looks very sexy with the new color. Just get that reinforced and it should he fine.

[Dominicano]

yeah the guy is going to fix it up for me then repaint it hopefully from now till i get back from NY i find a oe jdm rear bumper so he can repaint that too :-)

[galantlvr34]

The paint on that is a dark gray isnt it?It looks blue or black from some angles.It looks good man.

[Dominicano]

The paint on that is a dark gray isnt it?It looks blue or black from some angles.It looks good man.

yeah it the lexus Smoky Granite Gray big reason why i chose it, love the black but hated the high maintenance on it lol

[galantlvr34]

yeah it the lexus Smoky Granite Gray big reason why i chose it, love the black but hated the high maintenance on it lol

Yeah it is a nice color and it kind of looks black at the same time.I like it,it is different.

[Reelax]

looks cool. good job bro!

[jorgea]

Looks like your project is coming along. Be sure to add more pictures here at https://www.thegalantcenter.org

[Rach3T8G]

Looks like your project is coming along. Be sure to add more pictures here at https://www.thegalantcenter.org

WTF!? :orangeconfused:

[Dominicano]

2x wtf? lol

[IVORY_G]

Spammer

[Dominicano]

finally all pieces are painted, JDM read installed.

http://img.photobucket.com/albums/v289/dominicano/paint%20completed/IMGP8569_zps18c9cf25.jpg
http://img.photobucket.com/albums/v289/dominicano/paint%20completed/IMGP8568_zpsad20357f.jpg
http://img.photobucket.com/albums/v289/dominicano/paint%20completed/IMGP8567_zps38f0312a.jpg
http://img.photobucket.com/albums/v289/dominicano/paint%20completed/IMGP8564_zpsa0723ea5.jpg
http://img.photobucket.com/albums/v289/dominicano/paint%20completed/IMGP8563_zpscabe804a.jpg
http://img.photobucket.com/albums/v289/dominicano/paint%20completed/IMGP8562_zps9ee5e09e.jpg
http://img.photobucket.com/albums/v289/dominicano/paint%20completed/IMGP8559_zps719979c4.jpg

My second mitsubishi in the back :-)
http://img.photobucket.com/albums/v289/dominicano/paint%20completed/IMGP8558_zpsdf3e6da4.jpg
http://img.photobucket.com/albums/v289/dominicano/paint%20completed/IMGP8557_zpseca99033.jpg
http://img.photobucket.com/albums/v289/dominicano/paint%20completed/IMGP8556_zps7156f7b2.jpg


muffler needs to get centered now
http://img.photobucket.com/albums/v289/dominicano/paint%20completed/IMGP8555_zps05920148.jpg
http://img.photobucket.com/albums/v289/dominicano/paint%20completed/IMGP8552_zpsf00f4153.jpg

[Dominicano]

next up if getting new rotors, ss lines and install these babies with a new set of wheels

http://img.photobucket.com/albums/v289/dominicano/paint%20completed/IMGP8579_zps8393fc7d.jpg

[wetamup2k3g]

Dope! Looking good man!

[99galantES]

Car looks sick what muffler is that?

[Dominicano]

Thanks!


Car looks sick what muffler is that?

Magnaflow 14832

[Galantman03]

Dadamn! That bish is clean!

[Rach3T8G]

Nice!

Sent from my Galaxy S3 using Tapatalk 2.

[greddy]

very clean, I really like it.

[Blue8g]

So much rake.

Drop rear a good bit and it'll be real nice IMO. (It already is, just nitpicking)

[Dominicano]

So much rake.

Drop rear a good bit and it'll be real nice IMO. (It already is, just nitpicking)


i am on eibachs and my car is a v6 so that's the set height, maybe its the street i am on.

[9G]

Nice

[Black8GV6]

Car looks great, I never did like that bumper but you made it look good.