joegalant
08-29-2010, 09:15 PM
1 pull down dome light
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00086-20100828-1508.jpg
2 solder wires to dome light u can do this with one or two sets ( i used 1) if u use two u can make it so that when u push one side it light up the led under dash as well
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00100-20100828-1641.jpg
3 run wires use a snake (in my case a car opening tool lol)though headliner then down the dash out of the bottom underneath the glove box. and run wires behind the radio and climate control area for the leds that will be under the drivers side
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00088-20100828-1509.jpg
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00091-20100828-1516.jpg
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00093-20100828-1524.jpg
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00098-20100828-1530.jpg
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00095-20100828-1524.jpg
(ignore the audio cables)
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00101-20100828-1718.jpg
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00103-20100828-1718.jpg
4 now its just a matter of wiring them up they will only work one way so test them before u cap them.
5. put the leds were u would like them (to apply them to the drivers side you will need some sand paper to get it to stick and some extra double sided tape)
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00106-20100828-2054.jpg
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00107-20100828-2054.jpg
sorry this write up wasnt the best ive done but any questions feel free to ask
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00086-20100828-1508.jpg
2 solder wires to dome light u can do this with one or two sets ( i used 1) if u use two u can make it so that when u push one side it light up the led under dash as well
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00100-20100828-1641.jpg
3 run wires use a snake (in my case a car opening tool lol)though headliner then down the dash out of the bottom underneath the glove box. and run wires behind the radio and climate control area for the leds that will be under the drivers side
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00088-20100828-1509.jpg
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00091-20100828-1516.jpg
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00093-20100828-1524.jpg
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00098-20100828-1530.jpg
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00095-20100828-1524.jpg
(ignore the audio cables)
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00101-20100828-1718.jpg
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00103-20100828-1718.jpg
4 now its just a matter of wiring them up they will only work one way so test them before u cap them.
5. put the leds were u would like them (to apply them to the drivers side you will need some sand paper to get it to stick and some extra double sided tape)
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00106-20100828-2054.jpg
http://i849.photobucket.com/albums/ab52/Joegalant/IMG00107-20100828-2054.jpg
sorry this write up wasnt the best ive done but any questions feel free to ask