Question about the panel where the rear speakers are...

[Corey2kG]

Well I was wondering if there was any way to tighten that panel down because the system must of loosened it the high mount isn't rattling its panel. Any suggestions?

[Corey2kG]

Bump Bump

[joegalant]

are you talking about the piece under the back window? the piece that goes on top of the speakers and the seat belts run though it? if so in my car anyway there is 3 bolts that hold it into place there actually for baby seats but those are the only things that hold the shelf in place

[Corey2kG]

Yeah!!! There's nothing underneath?

[joegalant]

ive taken it out a few times the only other thing that holds it down is the 3rd brake light it bolts thought the bottom nuts go on from inside the trunk(id take pics to better explain what im sayin but i dont have the g with me right now)

[joegalant]

dont overtighten the brake light it will break it happened to me 2X

[Corey2kG]

I know about those I tighten those up but it the cover that rattles.

[joegalant]

idk then the only thing that rattles in mine is the 3rd brake light because i broke it lol lookin 4 a new 1 though. do u have a sub in ur car?

[Corey2kG]

Yeah two 12" Clarions and a 1800watt kenwood.

[Galantman03]

Get some dynamat, it should stop it. I had that problem, but when I took out my brake light and put some dynmat down, silence.

[Stewi]

anyone try laying down a piece of dynamat between the cover piece and the metal the speakers mount into? Should cushion it a little bit and maybe stop the rattle

[Stewi]

Get some dynamat, it should stop it. I had that problem, but when I took out my brake light and put some dynmat down, silence.

Ohhh you are fast like ninja

[Corey2kG]

I was gonna do my whole trunk at one point not that my trunk rattles obnoxiously lol. But the company that I do my electronics want $360 for a Dynamat kit. Anything else I can use?

[Corey2kG]

Ohhh you are fast like ninja

I take it you two were typing at the same time. LOL

[Stewi]

I was gonna do my whole trunk at one point not that my rattles obnoxiously lol. But the company that I do my electronics want $360 for a Dynamat kit. Anything else I can use?

Yeah dont buy it from them. Jegs.com sells a ton of sound deading material from all companies including dynamat, check them out.

[Stewi]

Here you go, same kit they want $360 for is $191.99 and $10 handling fee. You just saved over $150 by not using the other place.

http://www.jegs.com/i/Dynamat/327/19405/10002/-1?parentProductId=763880

[Corey2kG]

But the kit they were probably selling was the extreme kit that was like $360 as well as soon as you posted I went to the website lol. N even so $192 is some bucks right there lol. I was wondering what about the foam they put under the rug????

[Galantman03]

Ohhh you are fast like ninja

ha ha i so fast i move like wind...

what about what spdfreak used... new skinz? i think they have a deadner that you can spray on with a spray gun, and to me i think it would be better, because you get complete coverage, no air bubbles, and also i spent $300 on the dynamat kit, to do the trunk, IMO, it was a waste of money lol, didn't sound really any different, i mean it got rid of the mid to high vibrations, but it didn't rid of the rattle on lows or super low notes... hold on a sec i get the link....

ha ha ok so it was second skin http://www.secondskinaudio.com/sound-deadener/spectrum.php

[joegalant]

Get some dynamat, it should stop it. I had that problem, but when I took out my brake light and put some dynmat down, silence.

what i was going to say. cant wait to get it in my car but i got a couple more important things first

[fatal1]

the rear deck also is held in by the rear c panels. you should take out the 10 mm bolt on top for the hanger and give it a good yank. you dont need to take it off completely but you should remove it from the rear deck and bend it out of the way. otherwise you will rip off the tabs that hold it there

[beam514]

kind of off topic, but I'm considering just cutting holes in the panel over where the rear strut towers are. It annoys me that I have to remove the back seat completely just to adjust my AGXs lol

[Galantman03]

kind of off topic, but I'm considering just cutting holes in the panel over where the rear strut towers are. It annoys me that I have to remove the back seat completely just to adjust my AGXs lol

What? no... thats like a honda mod.... don't do that lol, do it right, i know it gets irritating, but still, lol thats a bad idea.... and you will lose my repsect lol jk man

[beam514]

haha yeah I really don't want to do it, but I also don't want to remove my seat just to set it to "1" so my passengers can be comfy -____- for the past year I've just left it on 4 and it's been funny watching them in the rear view mirror hahah

[Galantman03]

shoot mine is at 2 and they are rough... i can imagine 4 lol, bouncing all over eachother, and yeah lol girls in the back ha ha ha...

[Stewi]

i posted in the wrong topic by mistake....removed

[jubeiaire]

why not just custom bracket your rear seatlegs and put two release levers on top so you can just pop the levers and fold down the rear seat with ease.....................I JUST FOUND MY NEXT PROJECT..........