cleared corners???

[8g-rider]

ok, so i took my heads out today in an attempt to clear my corners, here were 800 little notches that i didnt wanna break, so i went to auto zone to see if the could do it for me, they said that if i take it apart, then the reflector is gonna be hard to get out, and that water will get inside the heads after puting it together.. any suggestions on what i should do? how did any of you guys do this?

[Reelax]

what are you talking about?

[OMEGA PHX]

@OP your post is a little confusing

I did it through the bulb hole pulled it loose, and then broke it with some needle nose pliers,
or you can bake and separate them and then resale I can assure you that if you seal them right they won't fog or get water since I've done it myself

[BayAreaGalant]

800 little notches??? Lol
Not exactly sure how your trying to go about it...
Maybe try this-
https://www.thegalantcenter.org/showthread.php?t=8228&highlight=cleared+corners

[Stepsascend]

You don't have to take the headlight apart. I just bent a flathead screwdriver and stuck it in the turn signal bulb hole between the headlight and reflector piece and pulled..Then break up the rest of the reflector with some sheet metal shears or whatever and shake it out like a rattle toy.

[The_fresh_Galant]

Its Easiest to use pliers with cutters on them. U jus break reflector into 5,920,380 peices an shake em out.

[Corey2kG]

I had the clear corners now I have the 02 heads n smoked the reflector.

[8g-rider]

hey thanks everyone, i followed the link that one of you gave me, maybe now i can make a photobucket and finally put some pics up of the lights, and the drop i recently did

[DTP]

I had the clear corners now I have the 02 heads n smoked the reflector.

How did you smoke them? I did my tails, and i was thinking the same thing...

[Corey2kG]

How did you smoke them? I did my tails, and i was thinking the same thing...

I open them up in the oven n with nightshade lightly smoked them looks alot better look in my pic thread the newer pics have the smoked reflectors.

[DTP]

I open them up in the oven n with nightshade lightly smoked them looks alot better look in my pic thread the newer pics have the smoked reflectors.

Think i could get away with doing it on the surface? I don't think i can use the parents' oven and get away with it... Haha

[Corey2kG]

Its not that hard or takes too long to open them its worth it although 02 heads look sick cleared.

https://www.thegalantcenter.org/showthread.php?p=616377#post616377
My pic thread

https://www.thegalantcenter.org/showthread.php?t=41313
My how to open up ypur heads thread.

[DTP]

Yeah i thought about getting '02-'03 heads/tails... Not sure yet. Gotta check pull a part