Help in NY [Archive] - The Galant Center

jubeiaire

10-24-2010, 10:31 PM

Gonna need help from all the NY Nj grease monkeys Between Nov 7th-14th.

Lots Of parts going on car:
TimeingBelt/Waterpump
5Speed Swap
D2 Coilovers
Headlights/HID Kitx2
NRG Quick Release Steering Wheel
Interior Swap
Rim Swap
Stereo Swap
Replace All motor mount Inserts
Replace All Tie Rods- Inner Outer Ends
V6 Headers
Custom Muffler run swap
Window Tint
Carbon Fiber Wing
Custom Rear Bumper
Custom Front Bumper
Dashboard Swap
Energy Suspension Polyurethan Bushing Kit X4 wheels

Will be a lot of work.
I will provide Food and drinks.
We will be at a private house. Neighbors that dont bitch about noise. Double car driveway/Garage so lots of space to Work.

Air tools, electric tools , hand tools Jack stands ramps creepers jacks Blah Blah Blah we wont be without tools. We can work from from 10 am to 9pm
If you are willing to help please sign up below or Pm me. The More we get the faster it goes.

Here are a few pics of Parts going in car.
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_00011.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/2010-10-19155818.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/2010-10-19155112.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/2010-10-19164500.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/2010-10-19162154.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/2010-10-19163645.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/2010-10-19164915.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0625.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0002.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/2009-08-04174222.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/2009-07-16163012.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/S5030157.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/7120583.jpg

keith6110

10-24-2010, 10:35 PM

where did you get the front bumper from?

Quite a bit of stuff going on the G. I'm a little jealous lol

bronxbombr

10-25-2010, 02:58 AM

Who's doing the timing belt and water pump for you?"

Isaurio

10-25-2010, 10:15 AM

hey bro good job. Dam is a lots of part to put on the G. But if you get like 4 members that know a few things everyone could take a project. Let me see if deeznutz and I could go and help you out.

SkylineG1

10-25-2010, 11:43 AM

2 things:

where are you in ny?
What type of food are we talking about?

Isaurio

10-25-2010, 11:48 AM

2 things:

where are you in ny?
What type of food are we talking about?

LOL good questions. LOL:bouncy::045:

bronxbombr

10-25-2010, 01:07 PM

LOL good questions. LOL:bouncy::045:

cosigned!

run1206

10-25-2010, 02:06 PM

wish i could, but that's marathon weekend :orangesmile:

Stewi

10-25-2010, 05:12 PM

Like I said when I spoke with you last week, im down to help but im not much of a V6 person in terms of timing belt and what not. Deeznutz would probably be the best for that since he knows the V6 well.

Galantman03

10-25-2010, 05:46 PM

where did you get the front bumper from?

Quite a bit of stuff going on the G. I'm a little jealous lol

ditto

bronxbombr

10-25-2010, 07:03 PM

Well I have done over ten 5spd swaps, so im good with that. I need my timing done as well and if we gonna make it a wrench day and what not maybe i can get something done too. Where are you located and how big is this place we will be working at?

deeznutz

10-25-2010, 09:56 PM

i'll help with whatever i know that platform like the back of my hand! Let me see im going to speak with Isuriao first cause he's prob rolling wit me. That bumper where the fuck you get that what's it made of? Do you plan on pulling the motor cherry picker you have one? What tools do you have?
Hey Stewi sorry i didn't get a chance to talk with you at MOD i feel like a doosh.

Isaurio

10-25-2010, 10:36 PM

Yeah i'm in. Have to help out a member.
For the front bumper the closest i could think about is this one molded for the 8G.
1989-1993 Mitsubishi Galant Cyber Front Bumper

http://www.bodykits.net/images/bodykits_net/169304/00.jpg

Stewi

10-26-2010, 06:50 AM

The bumper he posted looks like the SVR-4 that VIS sells. Its essentially an old style JDM front with the SVR4 lips molded into it already and its all made of fiberglass.

Deez, I've never taken out a v6 before, can you remove it thru the top with the tranny still attached? If you can, its probably easiest to swing the motor/tranny out together, have you working on the t-belt and the rest of us working on swapping to 5 speed.

BronxBlur23

10-26-2010, 09:19 AM

Now that's the way to get this shyt done... Extra envious right about now.... can't wait 'til tax season....

deeznutz

10-26-2010, 11:19 AM

Rach3T8G

10-26-2010, 11:27 AM

This sounds interesting wish i could be there to help out/learn

jubeiaire

10-26-2010, 12:32 PM

Sorry for late reply had to take care of a few things so no internet time.....I will Serve Chicken, Beef Ribs and another meat. Im in queens by hillside as stated above will be at private house with two car drive way about 4.5 cars length long not including garage. Heres a Pick so you get an ideah
http://i257.photobucket.com/albums/hh220/jubeiaire/S5030151.jpg
My car is sitting in tthe middle of the drive way as you can see there is plenty of room. i have two air compressors the small one and a tall stand up one. we will be pulling the motor and tranny out from the black 8g and just the motor from the grey 8g. i have no problem with anyone that is helping fixing any of their cars i just ask that we not pull any other motors till after we put my 1st motor back in just to avoid having my pops flip seeing 3 motors out at one time.

bronxbombr

10-26-2010, 01:19 PM

Stewi you should be Able to remove it from the top with the right angle, I did mine from the bottom much easier this way. As for the t belt and water pump I'm on it!!! The 5 speed is a Lil different on the 6 because it has a pull style pressure plate not the push style like the 4. Have to snap in a clip on throw out bearing after trans is mounted can be a pain in the ass but I got the trick...

Well how bout you do the timing on say his car and mine or whatever and we do everything else :)

Im all in on the 5spd swap since I know that like the back of my hand, you can do the timing and whoever else can pick what they know how to do. What day you wanna do this cuz its getting cold and if you ask Chris(mko) a 5spd swap in the dead of winter is crazy but can be done.

And I cosign with Stew its better to take out the whole engine and trans especially cuz you going 5spd.

Stewi

10-26-2010, 03:06 PM

qnz

10-26-2010, 05:03 PM

i will come to LOL and take pics of the fail.

j/k.

deeznutz

10-26-2010, 06:16 PM

i will come to LOL and take pics of the fail.

j/k.

thats not nice...

Like i said i'll do whatever just don't ask me to swap out shifter cables no no hell no once is enough!!! wow 2 timing belts ain't I lucky
almost forgot do you have the starter plate and did Fidanza give you longer bolts for the flywheel didn't see these items in the pics

jubeiaire

10-26-2010, 08:29 PM

ill check the box for the bolts. and im just going to cut the auto plate. no need to buy a new starter plate when i got all these shiny High speed tools i can use.

jubeiaire

10-26-2010, 08:46 PM

jubeiaire

10-26-2010, 08:48 PM

New Parts came in YAY im happy.
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1784.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1783.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1782.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1781.jpg

deeznutz

10-26-2010, 09:53 PM

clean that crap up lol I only work in the most pristine garages. how much did the dealer charge for the shift linkage. no springs or felt washers wit the clutch fork and find those bolts for the flywheel without them the mani tranny is a no go... whats under the cover in the garage a surprize?

jubeiaire

10-27-2010, 01:05 AM

Cables were $94.00. Guess i gotta make a trip to mitsu and check on springs and washers. whats the size/thread on the bolts if its not in the box ill just get some from home depot. If i tell you whats under the cover ill have to keep your pistons as collateral.

deeznutz

10-27-2010, 07:43 AM

The threads are a fine thread they should have came with flywheel mine did... I have some OE bolts that u can use for comparison. Engine hoist u have one?

Isaurio

10-27-2010, 09:41 AM

OK heres the space pic. as you can see we have plenty of room and if it gets cold we can go in the garage. Ignore the mess i was sorting out stuff going to the trash.
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1779.jpg

Yeah bro if you expecting a few members over you need to clean the place a little bit to gain more space. Like I said before to save time each person take a project such as, one person take the timing belt, the other one takes the shocks "coilov" and so on. Also double and triple check that all the parts are there for any conversion or swap.

jubeiaire

10-27-2010, 10:21 AM

you guys didnt read the caption above the pic. i said i was sorting out stuff that was going out to the trash.that means it was all trash and being thrown away; but out here in queens we have to SORT our trash or we get a fine from the sanitation dept. Im not going to sort trash in my moms living room.

engine hoist is on its way. not sure if ill get a stand. Maybe if pepboys has a sale on one.

if you think something is missing just say what it is and ill double check to make sure its there

deeznutz

10-27-2010, 10:44 AM

Don't really need the stand but a dolly would be nice... Thread lock pick some up the blue one. We really need to start planing this thing out who's coming when this way things can go together in the right order...
Stewi what day were you thinking of going?

Stewi

10-27-2010, 02:43 PM

I think the only day I can do it will be 11/7 after work which would be around 4pm and/or sunday 11/8 from like 9am-2pm or so.

jubeiaire

10-27-2010, 03:52 PM

I think the only day I can do it will be 11/7 after work which would be around 4pm and/or sunday 11/8 from like 9am-2pm or so.

stewi 11/7 is sun 11/8 is mon

Stewi

10-27-2010, 08:11 PM

Ok then its gonna be 11/6 after work and 11/7 9-2pm

deeznutz

10-27-2010, 09:04 PM

Sunday the 7th looks good for me too.

jubeiaire

10-27-2010, 11:44 PM

sun 11/7 at 10am is fine. BUt i got a paintball match at skirmish on sat. so prob wont be back in time to do anything.....ill letyou know

qnz

10-28-2010, 09:06 AM

Looks like I know what I'm doing on Sunday

deeznutz

10-28-2010, 12:04 PM

Looks like I know what I'm doing on Sunday

I expect a positive aditude lol...

jubeiaire

10-30-2010, 03:09 AM

new goodies
http://i257.photobucket.com/albums/hh220/jubeiaire/Lights/IMAG0005.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Lights/IMAG0006.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Lights/IMAG0010.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Lights/IMAG0008.jpg

deeznutz

10-30-2010, 07:28 AM

OMG that triple diamond is so 70's & 80's. Please tell me your not sticking that on your hood! But it can serve as a really cool paper weight...

Malcriaoxx

10-30-2010, 10:29 AM

I am def going just to eat everything lmao.sorry I ain't no grease monkey but will help with anything

jubeiaire

10-30-2010, 11:48 AM

im going to cut off the stand and Paint it Black Chrome Then fill in the circles with a crystal clear red resin and mount it like the symble for BMW's. might put leds behind it so it lights up with my headlights. i could paint it red and do a Smoked fill but then t would look stupid back lit. I figured just stick with the official Red/Black symbol colors and ill be fine. it will be the only thing on the outside of the car showing regular people its a mitsubishi.

deeznutz

10-30-2010, 08:43 PM

I just got my hands on a Diamante intake mani, t/b and fuel rails if your interested

jubeiaire

10-30-2010, 11:43 PM

ill give you three peices of chicken and two hotdogs...ill even throw in a cold corona and a shot of jose......deal?

Isaurio

10-31-2010, 10:17 PM

ill give you three peices of chicken and two hotdogs...ill even throw in a cold corona and a shot of jose......deal?

Sounds good to me LOL. :066:

Stewi

11-06-2010, 07:56 PM

ok is this still going on?

qnz

11-06-2010, 08:26 PM

whats the address

Stewi

11-06-2010, 09:57 PM

I have no idea, thats what im trying to figure out. I dont wanna be the only one who shows, especially since I can only stay until about 2pm, we wont get much done if its one or two of us.

Stewi

11-07-2010, 02:16 AM

Ok guys I am definetly out. My wife hasnt been feeling well for a a few days, so today it got to the point where she was having trouble breathing so I took her to the ER. I've been over there since midnight, they thought it was her asthma acting up but it wasn't, preliminary test suggest it could be something more serious like a blood clot in her lungs, they are keeping her overnight for observation and are going to do more tests in the morning.

Stewi

11-07-2010, 06:51 AM

Still at the hospital with my wife. I tell you sleeping in a hospital chair is no fun, I'm just glad they didn't make me go home and leave her there alone for the night.

Isaurio

11-07-2010, 07:43 AM

I'm so so sorry stewi. I hope ur wife is ok. Me and dezznuts are leaving soon. Bro keep us update about your wife.

Corey2kG

11-07-2010, 08:11 AM

Hey sorry Stewi I know the feeling. My wife is in the hospital a lot. Hope all goes well n she gets better.

jubeiaire

11-07-2010, 08:16 AM

sorry i didnt post on here yesturday i was in pa playing paintball till 8pm. i sent you guys text messages on your phones. Qnz i sent you a pm cause i dont have your number anymore-new phones-.

Brian gimmie a call if you need anything or just someone to come sit with you at hospital. i sent you a text as well regarding support. Hope all is well and shes getting better.

Stewi

11-07-2010, 02:25 PM

Corey2kG

11-07-2010, 02:56 PM

Thanks guys.

I just got home from the hospital with my wife, all is well. The testing for blood clots in hear lungs/heart were negative, so they think its bad muscle spasms being caused by her asthma or because of the way they baby is sitting. Bottom line is as of right now, wife and baby are OK and the problem isnt serious.

SWEET!!!!! (that all is well). I was just about to PM you asking how the MRS was. I'm glad to hear it. But DAMN!!!! that's alooooong time to be in the hospital.

Isaurio

11-07-2010, 05:49 PM

Great bro that's great news.

Malcriaoxx

11-07-2010, 08:00 PM

Thats Good News,No scratch that...Thats excellent news xD.Hope everythings stays like that too.

jubeiaire

11-07-2010, 08:30 PM

Glad to hear it Brian . Give my wishes to the misses and kiss the belly for me. and best of all NO permanent bed rest.(GOD I HATED KIMS BED REST PREGNANCY). go get some sleep and enjoy your own bed and blankie.

QnzMostWanted

11-07-2010, 08:56 PM

u still didnt install that stuff!! u fail

QnzMostWanted

11-07-2010, 08:57 PM

well im home all day long, so i can definitely help you out, give me a call, PM me for my number

jubeiaire

11-07-2010, 10:27 PM

We started the tear down/install today. so :-ppppppp

Thanks to Stewi Isaurio Deeznuz and Qnz for helpin me with this project. Stewi couldnt be there do to family emergency but he Was a huge help to me in getting parts and so forth. Get well soon wishes to Stewi's wify. and heres some pics

Taking the 02 engine out
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1789.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1788.jpg

Its gonna go into this 00 bay
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1790.jpg

DIsconnected and ready to pull
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1794.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1795.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1796.jpg

Score: Humans +1/Machine +.03
From left: qzn Deez Isaurio
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1799.jpg

Old Headers off Megans On

THE HEADERS BOLT HOLE ON ONE END NEED TO BE BORED OUT ON EACH PEICE

http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1806-1.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1807.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1808.jpg

http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1792.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1793.jpg

SMILE MA your on Camera
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1800.jpg

Double Checking Timing marks.
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1803.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1801-1.jpg

FIdanza Flywheel installed
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1810.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1811.jpg

Internal prep of 00 for manual swap
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1791.jpg

More pictures up loaded tomorrow

Corey2kG

11-08-2010, 12:14 AM

Lookin good so far!!!

BronxBlur23

11-08-2010, 02:37 AM

sooo envious right now... i wish that could be my G.... really need to strip my G down and see what going on with mine, but not til tax season

Exhaust power

11-08-2010, 03:15 AM

makes me happy to see tgc members working on a g! whats are you going to do with the part car? . cant wait to see this run.

Isaurio

11-08-2010, 09:43 AM

We did a lot that day. The car should run in no time. Mechanical all it needs is to drop the 5 speed that is almost 45% done. Overall progress about 35% in one day. It was not a bad day a little cold but for 4 members to overhaul 2 G's in one day "8hr period” it was pretty good.

Corey2kG

11-08-2010, 11:34 AM

But still you guys did alot for being cold outside.

deeznutz

11-08-2010, 12:06 PM

It wasn't that cold.. Man up bitches!

Corey2kG

11-08-2010, 12:15 PM

It wasn't that cold.. Man up bitches!

Hahaha
:021:

jubeiaire

11-08-2010, 04:05 PM

ill be working on the car again on wed. tomorrow i see my lawyers and its parent teacher day at daughters school. i may squeeze in an hour or so but depends on how tired from running around city all morning

Malcriaoxx

11-08-2010, 07:11 PM

Looks Effing Great xD !
Cant Wait Till I see that car running.

jubeiaire

11-10-2010, 10:10 PM

got a few more toys and lil more work done, Thanks for teh help Qnzmostwanted:

new led Bulbs for Halos. going from blue to red.
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0067.jpg

Stock Bulbs im replacing
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0068.jpg

Intermediate shaft and Tranny Mount from Dealer
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0036.jpg

JDM clutch Resivior
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0041.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0048.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0047.jpg

Rear Adjustables from CALI:
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0049.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0051.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0052.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0054.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0050.jpg

Lil man wants to help
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0021.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0019-1.jpg

Got the Manual sized Brake pedal installed
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0064.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0063.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0061.jpg

Ouch
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0090.jpg

Tranny and Engine Mated
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0056.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0058.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0057.jpg

Isaurio

11-11-2010, 01:02 PM

Nice job bro.

QnzMostWanted

11-12-2010, 10:38 PM

ima be there around 9:30ish, I will work on the interior as you guys pull the other engine (im being lazy lol)

jubeiaire

11-13-2010, 09:49 PM

So we got to work today on the g and after a few Hiccups pulling the enginew/auto tranny attached we ran into a few BIG AS FARTS the car had for us.

Removed the shit condition V6 w/tranny attached
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0172.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0174.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0171.jpg

First set of Farts----
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0189.jpg

As you can see its frozen like a Cow at a meat lovers convention
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0186.jpg

Look now i have a huge paper weight blocking my good engine/tranny
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0185.jpg

Second set of FARTS------

whats missing
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0188.jpg

how about this one anything seem off
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0190.jpg

so with those two FARTS on the table I took a break and assembled the intermediate shaft and pulled the good axle from my 02
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0178.jpg

while i was in there i pulled my fron D2 Dampers
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0175.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0176.jpg

Meanwhile the guys discover that my Rack/Pinion boots on the 00 were Torn, so we had to pull the Rack/Pinion out,,,,OH FOR FUCK SAKES:------

http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0177.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0182.jpg

Ps if you pull your Rack/Pinion your gonna have to remove the fire wall boot to see this peice. Its pressure closed by a bolt but after years of that it doesnt spread back open so your gonna have to use a wedge and open ir back up to get the spindle out
Clamp:
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0181.jpg
Spindle:
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0183.jpg

Rack/Pinion Removed
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0191.jpg

OOOOOOO look i have a rare Valve cover for all my hard work
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0193.jpg

Also attached Manual Intermediate shaft to engine. Megan Headers clear just fine so side note: MEGAN HEADERS fit with one Modification needed. You will HAVE to bore out the outer bolt holes one size bigger to clear the bolts smootly that is all.

LOOK someones in the engine bay.....wooopieeee.......blech....
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0180.jpg

NO clue why i ordered these
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0199.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0211.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0210.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Lights/IMG_0208.jpg
will attempt to get more done tomorrow

Corey2kG

11-13-2010, 09:56 PM

I have that valve cover as well.

jubeiaire

11-13-2010, 09:58 PM

put it back on my engine RIGHT NOW.....and dont wake my moms when you sneak out.........................

jubeiaire

11-21-2010, 07:48 PM

More work done......

Power washed the bay a lilbit

BEFORE
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0171.jpg
AFTER
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1965.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1964.jpg

Installed the Rack/Pinion will post a tut too
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1980.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1979.jpg
Quick primed the shield
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1983.jpg
Then some paint and clear. Just a quick spray to make look decent
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1984.jpg
Installed with rack/pinion
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1986.jpg

Plated off my EGR return Port
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1975.jpg

Painted and installed starter. Moddified Auto starter plate to fit manual tranny
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1999.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1995.jpg

Motormount inserts installed, then mounts reinstalled
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1971.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1972.jpg
WD40 and a Vise grip are my friends
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1973.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1963.jpg
Test color for the mount. i think ill make them all this color
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0225.jpg

Clutch Master and Clutch pedal installed
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_2013.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_2012.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_2015.jpg

Engine and tranny back in car.
FUCK IT WAS DARK AND COLD THIS SUCKED DOING SOLO
Would have been easier if it was hot wouldnt have been distracted by my nuts freezing and falling off.....................
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_2018.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_2017.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_2024.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_2021.jpg

M-Rod

11-21-2010, 08:09 PM

Congrats on the work so far, but I have to ask just one question. Why pull the engine without dropping a 6G74 or 75 in? Would have saved a lot of work in the future if you ever go that route.

jubeiaire

11-21-2010, 08:17 PM

Didnt pull the engine for tranny. I took my engine from my 02 8G and dropped it into an 00 8G with manual swap. 02 has frame damage but only 85k miles; 00 had 215k mile so i used 00 for the frame. also 00 doesnt throw code when swapped. when im done only original thing left in 00 frame will be the ECU

QnzMostWanted

11-21-2010, 08:19 PM

he pulled the engine out of his 02 cuz it had 80k miles on it, the engine in the 00 was like 200k

keith6110

11-21-2010, 08:20 PM

Looks sweet. Seeing Aaron at work on a v6 is also priceless =)

QnzMostWanted

11-21-2010, 08:20 PM

yeah what he said lol

jubeiaire

11-21-2010, 09:53 PM

Framed 8X10s of Aaron working on V6 for $20 shipped. Got video for $25, extra $35 if you want me to photoshop in a skirt.....................

jubeiaire

11-28-2010, 09:54 AM

I am now 5speed BiATCHES Heres some pics for you girly men to look at

http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0118.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0152.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0122.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0123.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0124.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0120.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0119.jpg

Engine bay Mostly Put Back together

http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0153.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0151.jpg

Started running the Big three wires
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0154.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0150.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0149.jpg

Megans test fitting for placement-Will be attaching rear run today

http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0131.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0133.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0132.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0130.jpg

Heres an issue. The[EDIT: AC Compressor for the 00 and 02 have Different Clips. If you have the engines out then its a good time to swap the wiring. you have to remove the belt to replace the power AC Compressor ...UGHHHH. Once they are back in its a bitch. Tiny as screw in bad place hard to get too with AC Compressor End EDIT] attached to block. Of course you can cut and splice wires but im not a girly man so i do it the right way................
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0129.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0128.jpg

Malcriaoxx

12-06-2010, 01:42 PM

i swear i would haved cut and spliced.I have No patience

jubeiaire

12-08-2010, 09:17 PM

SO i did a lil more work, got the car to start and man is she loud withoout the muffler run on. SHES ALIVE MWUAHAHAHAAHA.
CReated a Ingnition key release cable bracket. second post in my tutorial page.
HERE--->https://www.thegalantcenter.org/showthread.php?p=631813#post631813

Also installed a new weighted stainless short throw shifter and solid Bushings. (will add tutorial link here)

Stainless short throw weighted VS non stainless shortthrow nonweighted
http://i257.photobucket.com/albums/hh220/jubeiaire/Shifterassembly15.jpg

finished install. NEW short throw, New solid bushing's, Custom Key release cable Bracket.
http://i257.photobucket.com/albums/hh220/jubeiaire/Shifterassembly153.jpg

Ceneter console back together, Will custom make a mount and change boot after i get my Xmas shift knob from my mother.
http://i257.photobucket.com/albums/hh220/jubeiaire/Shifterassembly157.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Shifterassembly156.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Shifterassembly155.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Shifterassembly154.jpg

Got a new cart too, man does this thing make my life easier
http://i257.photobucket.com/albums/hh220/jubeiaire/NewToolCart.jpg

im being eco friendly too lol
http://i257.photobucket.com/albums/hh220/jubeiaire/EcoFriendlySockets.jpg

More pics later back to tuts

deeznutz

12-08-2010, 09:21 PM

almost there kid can you smell it!

jubeiaire

12-08-2010, 09:22 PM

yeah i can, exhuast stinks without muffler lol

deeznutz

12-08-2010, 09:24 PM

loud as all hell 2

jubeiaire

12-08-2010, 09:28 PM

yeah it was, family opened the windows and cheered for joy when they heard the car going.

deeznutz

12-08-2010, 09:30 PM

u owe me a test ride

Malcriaoxx

12-08-2010, 09:32 PM

Damn man post a vid you revving it up or something

jubeiaire

12-08-2010, 09:33 PM

after i have two working front axles and Bearing Hubs on the car well see if we can get around the block ROFLOL

deeznutz

12-08-2010, 09:36 PM

hey no talking down its going around the block and not come back for a wile you'll be having too much fun!

Malcriaoxx

12-08-2010, 09:41 PM

hit the highway >=]

Corey2kG

01-21-2012, 01:57 AM

Thread REVIVE!!!!!!!What ever happened to this???

Isaurio

01-21-2012, 01:26 PM

Lol. Mazda thats what happen.

Corey2kG

01-21-2012, 08:26 PM

Seems like a big waste of time n money.:/

jubeiaire

02-01-2012, 07:24 PM

hello all im back, been gone for a while lots happened , still have my G just been slow working on her while getting my family life in order. Not a lot done but what was done was intensive and back breaking even with proper tools. ill post pics later. Gonna be about a week before i can get back to her, Waiting on dual pot calipers to get in while i let my eyes recover from surgery this past weekend. Ive also got a new fetish ill share with all,,,,COOKIES AND TITTIES,,,, mix em however you wanna life will still be great when you have both!!!

Exhaust power

02-01-2012, 08:57 PM

Welcome back jack!

Exhaust power

02-01-2012, 08:58 PM

Welcome back jack! hope all is well.

deeznutz

02-01-2012, 09:00 PM

Jay boogie back in da house yo...

jubeiaire

02-02-2012, 10:25 AM

yeah life is good right now, i designed and built a new bar, its making me wanna be an alchy, temptation temptation, i got over 100 bottles on it, i have pics ill post up soon, maybe in another thread, sad thing is i still dont have all the bottles on my list

mrjaydeeone

02-04-2012, 08:08 AM

Did I hear something about drinks and a bar LOL. Welcome back. Glad to hear everything is going good for ya.

JDyal

03-24-2012, 03:17 PM

WOAH do I hear a drunken meet coming on? XD

jubeiaire

05-09-2012, 01:03 PM

Car got put on hold due to moms selling house and me being the only child i had to step up and hold her down.
Car is now off hold and im back to working on her.

Ok; so my update:

Stripped down old G in a few hours cause had to get her out the driveway for new owners to take possesion of house.
http://i257.photobucket.com/albums/hh220/jubeiaire/2012-04-03_11-42-50_983.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/2012-04-03_11-42-30_889.jpg

My baby is leaving....
http://i257.photobucket.com/albums/hh220/jubeiaire/2012-04-03_16-15-01_739.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/2012-04-03_16-15-12_554.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/2012-04-03_16-15-21_292.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/2012-04-03_16-15-29_441.jpg

Had to finish the suspension/axles/brakes for the car to be moved to the shop
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_5327.jpg

so i finished it
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_5323.jpg

The Remaining G is in the shop, while shes getting mechanical and body done im working on interior and a few spare engine parts i have from the old g i parted.
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_5016.jpg

this is the color i decided i wanted on the car
http://i257.photobucket.com/albums/hh220/jubeiaire/2012-04-25_11-36-37_831.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/2012-04-25_11-36-28_166.jpg

because i changed mind on color of car and i powder coated my calipers i have to redo my rims....that and im getting a new set of rims too so im all wtf now.
the rims looked like this
http://i257.photobucket.com/albums/hh220/jubeiaire/2011-05-03_18-35-23_471.jpg

then i did this
http://i257.photobucket.com/albums/hh220/jubeiaire/2011-05-03_18-18-29_310.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/2011-05-03_22-56-57_171.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/2011-05-03_22-56-48_690.jpg
Now im gonna strip them and repaint them again.................

Upgraded to 99 Dual pistons...powder coated them......
Coating:
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_5355.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_5361.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_5363.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_5368.jpg

About to go in the oven
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_5374.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_5353.jpg

After the oven
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_5376.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_5377.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_5379.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_5380.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_5382.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_5381.jpg

on the car
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0434.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0433.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0437.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0436.jpg

new toys, drill driver hammer combo and folding vice/work table.
http://i257.photobucket.com/albums/hh220/jubeiaire/2012-05-07_23-09-07_16.jpg

this is a pita to work on... all those lil nooks and crannies...i still have to go back and get a laterul wheel.....fuck me why did i take up car modding as a hobby/stress reducer......But i love my g so fuck it....
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0458.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0461.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0463.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0464.jpg

preview of color scheme for interior.
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0456.jpg

Started shaving foam off dashboard.
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0450.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0449.jpg

got allllll the way into the nooks
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0454.jpg

smooth it all out
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0453.jpg

Isaurio

05-09-2012, 01:27 PM

good work. about time you put some time to it.

wetamup2k3g

05-09-2012, 01:42 PM

If you don't mind me asking, what happened to the old G? It looked so sad being towed away.

Skyforger

05-09-2012, 01:42 PM

Nice work, interested to see where it goes.

jubeiaire

05-09-2012, 01:55 PM

If you don't mind me asking, what happened to the old G? It looked so sad being towed away.

short version, had accident, thought frame damage, bought new g for $600, swapped everything from old g, did manual swap at same time. Found out after swapping not frame dmg. was holding old car for repair build, time ran out moms sold house stripped car put parts in storage keep black one.

QnzMostWanted

05-09-2012, 02:21 PM

GOOD JOB GENIUS!!! lol jk

wetamup2k3g

05-09-2012, 03:10 PM

I see. Sad to see the other joint go, but this one can come back even better. Keep the updates coming!

jubeiaire

05-09-2012, 07:32 PM

GOOD JOB GENIUS!!! lol jk

yeah i was dumb enough to listen to you when you said it was frame dmg........you owe me 600 bucks......"oooohhhh, oh snap, oh no he didnt just say dat"

QnzMostWanted

05-09-2012, 07:35 PM

yeah i was dumb enough to listen to you when you said it was frame dmg........you owe me 600 bucks......"oooohhhh, oh snap, oh no he didnt just say dat"

i had nothing to do with that !!! u bought the car before i even saw it

jubeiaire

05-09-2012, 07:47 PM

you saw the the pics from the wheel well jam crash bang area.....its your fault...you must wear an icecream print bra on your ass for 2 weeks now

jubeiaire

05-09-2012, 07:49 PM

New Toy
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0470.jpg

Let the beatifiing begin
looks yucky
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0476.jpg

was all over
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0475.jpg

initial cleanup
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0474.jpg

Lil dress up for the engine.
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0468.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0469.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0467.jpg

jubeiaire

07-23-2012, 09:12 PM

so i had to kidnap the g from the shop she was at and finish her transmission transplant myself. pics to follow just typing this while photos upload

jubeiaire

07-23-2012, 09:40 PM

she was here
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_5016.jpg

then they moved her here
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0504.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0503.jpg

she sat there so long i almost had a baby so i kidnapped her and put her here
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0530.jpg

safe and sound at my cousins house
bought a few tools.................

http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0535.jpg

http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0536.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0534.jpg

then proceeded to get to work---

http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0531.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0540.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0543.jpg

Plenty of clearence to work under her

http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0544.jpg

started to rain so i got an umbrella

http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/2012-07-20_23-09-08_225.jpg

http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/2012-07-20_23-08-36_341.jpg

transmission install a sucess---
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0550.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0549.jpg

back on the ground where she belongs

http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/2012-07-23_18-57-08_672.jpg

http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/2012-07-23_18-56-43_894.jpg

QnzMostWanted

07-23-2012, 09:52 PM

but does she move?

jubeiaire

07-23-2012, 09:56 PM

yes we went up hill to the corner and back.... to many cops around area to go further without bumpers front plate and inspection

QnzMostWanted

07-23-2012, 10:01 PM

great, glad to see the shop didnt fuck up the transmission

what morons

jubeiaire

07-23-2012, 10:02 PM

Started her up, she needs a tune, ISUARIO WHERE ARE YOU??!!!!

and im getting a weird sound when i press the clutch pedal down.
heres a video:

http://i257.photobucket.com/albums/hh220/jubeiaire/th_2012-07-23_19-10-18_739.jpg (http://s257.photobucket.com/albums/hh220/jubeiaire/?action=view&current=2012-07-23_19-10-18_739.mp4)

All the pedals are way to loose for my happiness anybody got a brake bleeder they can come and help out with.

oh and i couldnt remember how to stiffen up the gas pedal.

Exhaust power

07-23-2012, 10:13 PM

If you want to bleed your brakes by your self you should look up bleeding brakes backwards. Did it on my prelude took about 5 minutes from having barley any pressure at all. And i dont think you can stiffen up the gas pedal? you can make it more responsive at the TB. Good progress whats next on the list?

jubeiaire

07-23-2012, 10:32 PM

swap two doors, swap front seats to my leather ones, but dashboard and center console back in, install ingalls rear camber kits, instal SOCAL adjustable rear arms, swap fuel assembly for one in storage, install quick release steering wheel, drink some vodka, change front tires, splice new driver abs clip, wheel alighnment and inspection, strip off all old paint and prime her and some other minor things,....

jubeiaire

07-24-2012, 10:37 PM

side skirts , gonna strip em and prime em

http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0585.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0584.jpg

Swapped out first door and mirror and installed tweeter bracket....however my cover is missing..........
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0586.jpg

http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0588.jpg

Radiator fan took an Asstastic crap on itself
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0591.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0592.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0593.jpg

Made my own metal cover for the Clutch Resivior, used a exacto with straight edge and shaved down resivior side arms one thin sliver at a time
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/2012-07-18_14-49-38_687.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/2012-07-18_14-50-09_148.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/2012-07-18_14-50-15_348.jpg

Prepping for start of interior install tomorrow; pulled out the cloth seats and put leather with mitsu Embrodery in back seat area.
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0587.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0590.jpg

pulled off both fenders as well so i can start prepping for paint removal, that will be SOOO much fun.....NOT...

Exhaust power

07-24-2012, 10:50 PM

jubeiaire

08-15-2012, 03:03 PM

so i decided to tear into the nightmare of a rear suspension on this car and give her a pedicure, mind you this rear is not mine and the previous owners racked 213k miles on car and i dont think they ever fixed anything.

In preperation i bought a bunch of new tools cause i knew this bitch was gonna try and break my heart and act a fool like any women getting her feet done for the first time

Tap/Die set
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7136.jpg

Map gas tourch kit with o2 tank
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7140.jpg

Eye, Ear and Hand Protection....and it came in handy
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7141.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7142.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7144.jpg

For stubborn parts and agrivation relief
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7143.jpg

Full Punch/Chisel set-Not sure why i didnt have one of these allready i had 4 of them when i was in the army.....
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7146.jpg

For the do it yourselfer
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7150.jpg

i dont remember but i nneded for something to do with the brakes....oh shit now i remember it was for the resplicing of the abs sensor
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7155.jpg

Hopefully she appreciates a man that lubes it up first
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7156.jpg

you should know what this is for....making pudding......
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7159.jpg

jubeiaire

08-15-2012, 03:16 PM

So heres the work......I almost put this bitch up for parts ask Dees and isuario i texted them said you need something..........

start with passenger side....look at this nastyness. Fucking horrible scary down right disgusting that they would let a car get that bad....and now i have the plessure of fixing it......

http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0418.jpg

spdracr

08-15-2012, 03:25 PM

My rear suspension needs an overhaul too I have new sway bar links and struts but I have rattle somewhere else. Sadly I don't have the money for it.

jubeiaire

08-15-2012, 04:24 PM

This is what well be installing

Ingalls camber Kit And the rear adjustable bar thingy Designed by Cali..TY Cali
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/2012-07-26_18-28-07_855.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/2010-10-19155818.jpg

http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0049.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0052.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMAG0051.jpg

Ceramic Pads Rear Ceramic Rotors Rear..i have fronts too but thats a diff day...
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7147.jpg

New calipers rear left and right only one box shown in pic...they dont come with the bracket so ill have to clean up my old ones.

http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7151.jpg

Energy suspension bushings ill only be putting in the outer arm to knuckle ones for right now
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0002.jpg

D2 dampers; they were put on allready but not adjusted properly

http://i257.photobucket.com/albums/hh220/jubeiaire/2009-07-16163040.jpg

Links
http://i257.photobucket.com/albums/hh220/jubeiaire/S5030304.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/S5030305.jpg

QnzMostWanted

08-15-2012, 04:27 PM

nice....now get the car on the road already :-p

jubeiaire

08-15-2012, 04:50 PM

First headach on passanger side

Tried to remove arm from bracket and bolt was frozen so i went after bracket bolts

The bolt itself was rusting through. Snapped right off inside sidewall of wheel well.
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0595.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0594.jpg

I tried to slavage the original threaded tunnel by going from small to bigger bits, got close but it still was stripping my new bolts threads.
Tap and die set to the rescue.

I re-threaded the hole and rethreaded the bolt. first time i ever had to fix a bolt allways just got new bolts, heres how it came out

http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7172.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7169.jpg

Exhaust power

08-15-2012, 04:50 PM

Its coming together man. Cleaning the body and suspension always gives me a better piece of mind.

jubeiaire

08-15-2012, 05:15 PM

Removing your dampers/struts will give you more play and area space while doing the rest of the work, if car is jacked up the rear suspension doesnt plummet to the floor like the front does without the dampers/shocks attached

i finally get the arm out and the fucking bracket bolts still wont come out so i had to take a trip to my boys job and use his vice so i could sledge them out

http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/2012-07-27_14-56-18_875.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/2012-07-27_14-56-33_637.jpg

after that i move on to the lower arm im pulling out,,,,,heres where alllllllllll the fun came in

as you can see not much room to play with in here
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/2012-07-27_14-55-34_507.jpg

i was forced to take the map gas torch and melt out the bushing so i could get enough leverage to hammer out the bolt
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7179.jpg

Had to hammer the whole bolt assembly through the wall since the sleeve is wider than the bolt hole,,,gonaa love fixing that hole back into place...[enter punch and hammer]
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7177.jpg

This bolt is suposed to be three seperate parts consisting of 1bolt 1 adjusting washer and 1 bushing sleeve. as you can see these three parts didnt know that and melded together
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7173.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7174.jpg

Once that was out i moved on to the brakes
removed the caliper and rotor and removed the sheild behind the rotor
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7165.jpg

http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0596.jpg

dont worry im not missing a stud i just ummm got excited when banging the rusted rotor loose and swung a lil wide....lol hehehehe

jubeiaire

08-15-2012, 07:19 PM

Moving on to the driver side i get teh upper arm brackets out but the damn bolt holding it to the knuckle is frozen to the sleeve. So i pull out my angle grinder and cut off thr nut and bolt head

http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0023.jpg

nut removed
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0018.jpg

Bolt head not as easy
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0026.jpg

she put up a fight
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0019.jpg

Kicked my grinder out into my hand...$9 gloves saved my finger from a world of hurt
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0028.jpg

back to grinding till she was off.
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0021.jpg

after cutting off the bolt head i was able to remove the arm and start working on getting the bolt out of the bushing. After coming to the conclusio that the whoel thing would need to be removed i sent my cousin to the store to get me another o2 canister. while waiting i made due of my time and removed the first one by hand.

A lil drilling and knife work
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0030.jpg

then a chisle to that left edge
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0031.jpg

a small sawzzall cut to help pry it ou til its here
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0034.jpg

then you have this rusty hole to clean before putting a new sleeve.
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0035.jpg

after replacing the sleeve...sadly only had one spare i put in the bushing with some anti seize
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0037.jpg

and now the bushing sleeve...more antisieze
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0036.jpg

prepping the arm...a lil antisieze
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0038.jpg

then my new bolts and washers with ...ahem...a lil anti sieze
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0039.jpg

then you lock it down and move on to the rest of the parts

had to repeat the same steps from drivers side to remove the lower arm side
rotor and calipers came off easy peasy on this side just needed to use torque gun and rubber mallet on my rachet to break a few bolt free.

no pics of removing the old ones of thesehttp://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7197.jpgbut i had to cut and grind these off as well due to the allen key screw being so rusted i couldnt use my allen key

D2 going back on with plenty anti sieze to keep me rust free for a lonnnggggg time

http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0041.jpg

Lower adjustable arm going in...again anti sieze all over.....
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7182.jpg
Locked into the knuckle and looking good
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7181.jpg

locked down with the first ingalls installed
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0040.jpg

Rotor and bracket on,,, wire wheel on bech grinder cleaned it up the bracket nicely...ill have a certain person powder them wehn i drive to jersey
...THATS A HINT SPD.....not naming anyone though....
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7189.jpg

Pads on.....

http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7188.jpg

Calipers on.....
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7195.jpg

Driver side arm on with bolt hole and bolt tapped/died to perfection
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_7163-1.jpg

Driver side all in place
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/IMG_0014.jpg

AS A SIDE NOTE; since i didnt have a spare sleeve for the drivers side i use the torch to melt out as much of the rubber as possible then i used a dremel with a grind wheel, the one shaped like a disc not a drum. reason is the drums leave grooves the disc is much smoother and wont bind up from the rubber. after cleaning it out give it a heavy coating of anti sieze and put in your bushing.

wetamup2k3g

08-15-2012, 08:18 PM

Anti-sieze is a mechanic's best fucking friend, we order it by the caseloads at my shop!

deeznutz

08-15-2012, 08:43 PM

Alot of new parts going in going to drive like a dream!

jubeiaire

08-15-2012, 09:23 PM

Anti-sieze is a mechanic's best fucking friend, we order it by the caseloads at my shop!

..nvm wrong place ......but i said it ....

spdracr

08-16-2012, 10:55 AM

looks good jay keep it up

based on what u decided how many washers to use with the camber kit ?? also how do they adjust ??

jubeiaire

08-09-2015, 01:05 PM

Okay I'm back at it again. Been gone for a while, life got really fucked up but I'm back on my feet. I'll be updating this thread soon. Lot going on with the G. See you'll soon.

jubeiaire

08-17-2015, 10:35 PM

Well for all the OG guys you know me collect parts collect parts collect more arts then get to building

so currently i have these parts being fitted and test fitted to her
http://i257.photobucket.com/albums/hh220/jubeiaire/Mobile%20Uploads/20150813_162432_zpsnpbtxztz.jpg

http://i257.photobucket.com/albums/hh220/jubeiaire/Mobile%20Uploads/20150813_162326_zpsfen7tito.jpg

http://i257.photobucket.com/albums/hh220/jubeiaire/Mobile%20Uploads/20150813_162315_zpsljljojxh.jpg

still need super vr4 tips, sorona rear bumper, Full Clear Taillights and Jdm Pwr folding mirrors + switch. If anyone local has them holla at me i will be ordering them on the 2nd if nobody gets at me.

Also gotta order a new lexus is300 wing(the one i had got stollen)

The stolen wing}http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/2010-10-19165206.jpg

Yay for stabil control
http://i257.photobucket.com/albums/hh220/jubeiaire/Mobile%20Uploads/20150812_084159-1_zpsmfjw8wk6.jpg

Did a color test with paint, then sent my Tenzo Passion 5s off to the powdercoat to have them color matched in powder coat.
http://i257.photobucket.com/albums/hh220/jubeiaire/Mobile%20Uploads/20150704_233356_zpsn5xhgrjr.jpg

Had fun priming the door jams
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1396_zpscqrehadh.jpg
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1395_zpsx3kdpf1d.jpg

Finally got my Valve cover and plenum installed....SHOUT OUT TO SPD for the powder job, MMMMMM look at those sexy radiator hoses lol

http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/20150808_222230_zps49kfut2c.jpg

Found something special in the storage unit
http://i257.photobucket.com/albums/hh220/jubeiaire/Galant/20150802_155455_zpshq4vzdgx.jpg

]

carl3g

08-20-2015, 11:59 PM

Wow this is coming along nicely. I thought you were focusing on the 6 lol

oakrdrs187

08-21-2015, 02:21 AM

What's that special part?

jubeiaire

09-26-2015, 12:15 PM

Which picture Oaks?

Hey Carl....still got the 6 but she's being focused on as a DD the G needs me to get back to making love to her... Speaking of which. Finally got my wheels back from powdercoat. Put new rubbers on them installed Sarona rear bumper, front Super VR4 extensions, DC sports upper tower brace, megan racing rear trailing arms, 02 trunk lid W/keyword and predrilled holes for wing, ARP extended studs. Installed full harness with resitors for front hid kits and new ballast for low beams. Installed front control arm ball joints, rebuilt both front calipers and repainted them. Installed jdm power folding mirrors...recutting usdm angled glass today.

Just got in new oil pan w/gasket. Megan racing front lower brace, new hangers for exhuast,suspension techniques rear anti sway bar with new bushings and mounting hardware. Powerstop evolution carbon/ceramic front and rear slotted crossdrilled fully brake kits including new hardware and guide pins. And abundant of other crap...... So basically I been busy.....Brb need a beer with a shot of whiskey in it.