View Full Version : Galant LS Badges
ichbindasgehirn
11-17-2010, 08:29 PM
Does anyone that has a 2002 LS know which badges are attached with adhesive? I figured all of them were, I just wanted to make sure.
M-Rod
11-17-2010, 08:57 PM
All badges are fine to remove without leaving holes except the Mitsu logo on the trunk.
ichbindasgehirn
11-18-2010, 09:32 AM
The diamond one on the trunk or the "Mitsubishi" Logo on the left side?
M-Rod
11-18-2010, 11:28 AM
The diamond will leave 2 small holes when removed.
Bee-Rad '92
11-18-2010, 11:57 AM
Yeah, the letters that spell "MITSUBISHI," "GALANT," "DE/ES/LS/GTZ," and "V6" have adhesive but leave no holes. Only the diamond emblem does.
ichbindasgehirn
11-18-2010, 03:58 PM
This is probably a stupid question too but would a hair dryer work in place of the heat gun?
Bee-Rad '92
11-18-2010, 04:03 PM
Yes, it would. I never used it, though. Just pulled the badges off by hand or used a card behind them, and rubbed off the adhesive.
polishmafia
11-18-2010, 09:15 PM
This is not a how to or a tutorial. Moved to the correct section.
vBulletin® v4.2.2, Copyright ©2000-2024, Jelsoft Enterprises Ltd.