PDA

View Full Version : Stock V6 Mounts Liquid Filled?



Rebel
01-05-2011, 02:54 PM
Are any of the stock mounts for the V6 liquid filled? Just curious. Tried searching but couldn't find anything...

Corey2kG
01-05-2011, 03:07 PM
I don't think so

Rebel
01-05-2011, 03:17 PM
Just wanted to make sure. I think I need some mounts as I have an rpm dependent knocking noise on light to moderate loads that goes away for a second if I hit a bump/hill and get into a little negative G action. I'd rather spring for the stock mounts if they are liquid filled for a little extra dampening. Otherwise, if solid rubber, then some cheaper replacements will suffice.

Corey2kG
01-05-2011, 03:27 PM
EBay

jubeiaire
01-05-2011, 05:32 PM
yes they are, the left and right mount have oil in them. the rear may be as well but it got to cold so i stopped cutting them open and went inside for cocoa

Rebel
01-06-2011, 01:01 PM
Lol thanks.

HondaKillerGTZ
01-07-2011, 07:15 PM
Theres no oil inside the v6 engine mounts. I have replaced broken ones a couple times and have not seen any oil.

jubeiaire
01-07-2011, 07:41 PM
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_01881.jpg

jubeiaire
01-07-2011, 07:50 PM
as you can see from here the side mounts acn be crushed down like a skinny guy under a fat chick
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1966.jpg



notice how the center bolt slide crushes in and tears from the outer swing arms
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_1968.jpg


however when you look at the bottom/rear mount they do not have those bumps. see how i ripped out the core smooth all around.
http://i257.photobucket.com/albums/hh220/jubeiaire/IMG_0190.jpg



ill check the old mem card from my hd2 and see if i took picks from when i set the mount on fire befor i cut it up into peices,........yes i get destructive when i get bored

HondaKillerGTZ
01-08-2011, 08:13 AM
Lol thats new to me, I had replaced busted mounts in my cars and have never seen any oil or mess coming out of them!!!