Finald8ta build

[finald8ta]

2010
history
well so far i have done alot to the G, i paid 1000$ for it looking like this
just before the paint job
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0586.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0585.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0584.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0583.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0582.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0581.jpg
the car did have an e_mange on it, butt was removed, car was gona be a prototype for a turbo setup for 3g and galant, before i bought the car from my friend i did the timeing belt and headgasket on it, my buddy gave up on the car and it sat for a yr doing nothing, i ended up have a son so i needed a bigger car, so i bought the G from him, since the car sat i had alot of work ahead of me, car was throwing codes out the ass, so after fixing most of the easy ones and redoing the wiring harness it finally ran great, i put all new motor mounts and trans mounts, new belts and tune up,

2011
car sat for abit been working alot of hrs an spend time with the family
income tax i had the car repainted
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0622.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0620.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0617.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0616.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0615.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0612.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0611.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0610.jpg

shortly after the paint i went crazy
eibach pro springs
cai (ebay) lol
tires
axle back exhaust (ebay)
new foglights and HIDs
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0657-1.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0659.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0658.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0657.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0655.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0654.jpg

as of right now im am really happy with it, went to a car meet and ppl were like "i never seen a good looking Galant like your", made me really happy inside

right now im done, gona save up and start a collection of new mods/parts
i am goning todo a 5speed swap and rear disc conversion, and put new struts on. thats my goal before aug
as soon as i sell the saturn ill have enough to get what i need

[dGALANTc]

looks like a good start... keep it up

[Boosted]

Did you get the whole car painted? That rear bumper seems as if it is a different color. Other than that, good start and hope to see more.

[finald8ta]

Did you get the whole car painted? That rear bumper seems as if it is a different color. Other than that, good start and hope to see more.

yea the whole car was repainted, i had to order a new rear bumper and the body shop didnt primer it like they did the car, the rear bumper was flat black and rdy for paint, thats y its darker then the rest of the car, one day after work im gona go to them and bitch about it and hopefully they will repaint it, butt its gona be a pain to match the rest of the car, so i might be stuck with it unless i get jdm parts......

[finald8ta]

big things coming up, stay tuned ppl

question. how long did it take u to do ur 5speed swap???????

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/DSCN0771.jpg
well here are the parts,
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0780.jpg
struts some what put together with new bump stops and bellos
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0779.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0778.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0777.jpg
new front sway bar end links with grease fittings (ebay)
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0776.jpg
new rear spring seat from (rockauto)
part # k7476
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0774.jpg
front and rear sway bar bushings from (energy suspension)
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0773.jpg
rear sway bar end links (ebay)
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0772.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0771.jpg
front bump stop/bello part#k90460 (rockauto)
rear bump stop/bello part#k90466 (rockauto)

anyone know if i should cut the bump stops or leave them the way they are?
car is on eibach pro kit
install starts saturday when the front struts get here

[02redgalant]

i didnt cut bump stops and im on eibachs too;make sure u grease those bushings plenty with the stuff it brings

[oakrdrs187]

No front shocks? Are you gonna lower it?

[r1concepts]

she is looking better and better. Cant wait to see the finish product!

[finald8ta]

No front shocks? Are you gonna lower it?

its already lowerd on stock struts, look at the time stamp on the pics that are 3/27/2011
when i installed the eibach springs i noticed i needed more parts and i already had the struts apart
car has some bounce to it more in the rear, had no choice to install the springs with no rear spring seats witch is giving me camber.
front struts should be here friday

[finald8ta]

she is looking better and better. Cant wait to see the finish product!

thxs man, did i win those rotors? lol

[r1concepts]

thxs man, did i win those rotors? lol

Sorry finald8ta. A Michael Koldus won the giveaway. They would look great on your car if you did win. :)

[finald8ta]

Sorry finald8ta. A Michael Koldus won the giveaway. They would look great on your car if you did win. :)

cmon im sure u can rig the next give away... lol

any who stop by the paint shop who painted the car and its going in for another paint job, reason is the paint is flaking on the front bumper and chipping in a few areas, also that rear bumper too, its all under warrenty witch wont cost me a dime,

[finald8ta]

ok guys put the .5 shorter belt, barely got it on butt it works
part# 365k5 (duralast)

[finald8ta]

well i installed new struts sat afternoon and well i fail big time.
ill let the pics do the talking
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0781.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0782.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0783.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0784.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0785.jpg
this is where i fucked up
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0786.jpg
this is the part i didnt install, its part of the old shock bello
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0787.jpg
this is the part installed, and everything is back to normal
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0788.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0789.jpg

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/DSCN0794.jpg
the insides
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0793.jpg
all taken apart getting prepped for paint
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0792.jpg
painted black still need to clear coat them

[Galantman03]

looking good man! spray paint or plasti dip?

[Skyforger]

looking good man! spray paint or plasti dip?

Looks like regular gloss black to me. Plasti-Dip is textured and matte looking.

[wetamup2k3g]

Looking good bro!

[Galantman03]

^well it depends how much you use for plasti dip, I've had my trim peices look smooth as glass, its just rubbery when you touch it. But true on the matte part lol

[finald8ta]

thx guys
its spray paint, automotive paint, im doing the same thing i did to my moldings on the doors

adding more black will break it up, cant want to get a lip and rynoline that witch will make it look even better same with side skirts

[underated]

where did you get the mirror from? the prep work looks great.

[finald8ta]

junk yard theres about 50 accords there

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0039.jpg
well I got home to tear into the G to fix the exhaust and this is what I found, gona get a new flex pipe weld it on. I HATE DRIVING THE SATURN..

[underated]

oh really what years?

[oakrdrs187]

Why bother, just chop it and go straight.

[finald8ta]

look on YouTube for a clip with obx long tube header with no cat. it sounds like a Honda almost am I don't like hondas. the cat stays

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0045.jpg

well I have one on so far. just to hot out side gona put the other one on when it cools off tonight.

I have a request for anyone who plays with PhotoShop, can some one black out the outter portion of the door handles for me thxs. like to see how it looks before I go to far.

[finald8ta]

ok so after the car overheated on me Friday after work I notice Coolent missing well I figured that out, then I flushed the Coolent system yesterday and notice Coolent on the pass floor, ok heater core. well after seeing it come from there. at work today it desides to not leak any more, must of been when I was flushing the system out, so ill be keeping an eye on it for the next few days. since the floor was soaking wet and it was not drying I did this

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0056.jpg

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0055.jpg

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0054.jpg

I also been having issues with my windshield leaking so I pulled everything,
I plan on removing the old matting on the floor bored and dynaline the bitch from cab to trunk.
I'm pricing out new carpet if the old one don't come clean and replace the heater core for shits and giggles

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0082.jpg

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0081.jpg

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0080.jpg

Sound deaden the floor and put a newer carpet in, also installed grey interior, only thing that didn't make it was the headliner, I'm going to have to fix it, it was starting to sag. I'll take pics of it all installed tomarrow, once I clean up the center console, it might get replaced with a grey one to tie it all together, maybe u guys can be the judge of that, also ill be replacing the window switch covers to grey once I get them from a member
HTC EVO 4G


HTC EVO 4G

[Redhaze]

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0054.jpg

Whats that below your HAVC

[finald8ta]

It my HD radio set up my unit antena don't work worth Shit so I picked that up to have radio, the sound is great in HD
It's taped to the ashtray
HTC EVO 4G

[OMEGA PHX]

Exterior wise your making your ES a DE lol, the deadening looks awesome

[finald8ta]

Exterior wise your making your ES a DE lol, the deadening looks awesome

What's the difference between the ES and DS?

HTC EVO 4G

[Redhaze]

What's the difference between the ES and DS?

HTC EVO 4G

The DE has black exterior parts window trim mirrors door handles cladding...ES has color matched and chrome trim

[finald8ta]

I was just going with a two tone look, to break it up, haveing it all one color didn't look sporty for me

HTC EVO 4G

[OMEGA PHX]

I have a DE lol but I colormatched the parts:
don't mind the chrome door handle covers, they were black underneath
Black mirrors, window trim, door trim, handles...
When I got my G VV
http://i195.photobucket.com/albums/z290/OMEGAPHX/Galant2001003.jpg

[Samman]

Good job, wanna c the interior after it is done

[finald8ta]

Interior is done will post pics later

HTC EVO 4G

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0089.jpg

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0090.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0091.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0092.jpg
HTC EVO 4G

WHAT u guys think, should I replace the center console, leave it tan, or replace the cup holder grey, ether way I still happy with it

[Skyforger]

If you're swapping out to grey, might as well go all out and get everything. Dash looks odd like that.

[wetamup2k3g]

^^X2, if you need dash parts I can get some from the JY's by me, although I think you got good JY's by you too.

[finald8ta]

We have decent yards its just I don't see many galants there, to be honest I didn't want all one color, once I swap out the window switch bezels it will look better, pics don't show everything it looks better in person tho

HTC EVO 4G

[wetamup2k3g]

We have decent yards its just I don't see many galants there, to be honest I didn't want all one color, once I swap out the window switch bezels it will look better, pics don't show everything it looks better in person tho

HTC EVO 4G

Gotcha. This is true, pics don't always do a situation justice. Do work bro!
Edit: I see you got ya green nugget game up too!

[finald8ta]

Gotcha. This is true, pics don't always do a situation justice. Do work bro!
Edit: I see you got ya green nugget game up too!

Really, I can't tell due to the fact I been using tapatalk,
Laptop took a Shit on me awhile ago and the comp out in the garage is off due to no internet , had to catch up on other bills and my new phone does the job just fine, all the pics iv took are from my phone so when I goto the AFM meet in Orlando ill have someone get some better pics for me
HTC EVO 4G

[wetamup2k3g]

That's not bad for a cell camera. And yeah, you've got all green all the way to the max now.

[99 galant]

too bad i don't have my two tone leather anymore, that would help you set it off well.

[finald8ta]

I like to have leather seats, if I find them in good shape, it will depend if it will flow with what I have going on alrdy on the inside, grey or tan
We will see

HTC EVO 4G

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0101.jpg

Score,
thanks fatal

HTC EVO 4G

[Redhaze]

So many colors inside that car

[finald8ta]

So many colors inside that car

Just grey and tan, and a bit of CF, next will be the door inserts, I was looking for grey door window bezals,

HTC EVO 4G

[99 galant]

that CF will set it off well

[IVORY_G]

So many colors inside that car

x2, two colors is the most you should have but the tan and grey don't compliment each other. And the faux CF just makes it too busy...

[finald8ta]

So while looking at vac line to figure out if my egr was work cuz I have a p0400 code I notice my I.m. mani is cracked right behind the TB, so after doing some research I got what I needed to kno and started looking for one, find one for 90$ shiped? Ask the guy to make sure it was a non mivec and he had no clue what I was talking about so I put it in simple terms "does it have a throttle cable, if it does its what I need" calls me back up and its what i need, it will be here next week, can't wait, I'm hoping this will solve my rough idle under load and that code

Car-parts.com is where I got it from

HTC EVO 4G

[oakrdrs187]

Great man, when you do receive and decide to tackle this, TAKE YOUR TIME!!
Be patient, don't rush. Congrats on the deal man.

[finald8ta]

It will be shiped? Soon as I pay for it don't get paid till Monday, it will be awhile still need gaskets and hope I get everything for the egr system with it I didn't get the injectors or TB since I'm alrdy have that swap done, and I can skip a set on rewireing the tps

HTC EVO 4G

[oakrdrs187]

Which reminds me, me sure you get the outlander TPS.

[finald8ta]

If I did my search right the v6tb should bolt right up and I really don't need the outlanders TB since its the same size, only difference is the configuration of the TBs
It should Bolt right up. RIGHT???!!!

Plz if I'm wrong about this enlighten me a bit more, if I missed something. I'm abit drunk and about to goto bed, gots to get up at 4am and be at work at 6am

HTC EVO 4G

[finald8ta]

Now that I think about it I might run into a snag with the throttle cable, ill have to fab up a bracket if that the case

HTC EVO 4G

[mrg7243]

You will be fine with the g64,g72,g74, and outlander TB they all share the SAME flange pattern. I have the 72 tb right now on my outlander mani.

Here is what I did as far as a bracket its really easy to make, Ill make the how to I have planning on doing within a week or two for it.

http://i1020.photobucket.com/albums/af322/mrg7243/IMAG0087.jpg

[Samman]

x2, two colors is the most you should have but the tan and grey don't compliment each other. And the faux CF just makes it too busy...

x3, Simple designs are better looking. just like OEM make

[finald8ta]

You will be fine with the g64,g72,g74, and outlander TB they all share the SAME flange pattern. I have the 72 tb right now on my outlander mani.

Here is what I did as far as a bracket its really easy to make, Ill make the how to I have planning on doing within a week or two for it.

http://i1020.photobucket.com/albums/af322/mrg7243/IMAG0087.jpg

Thx you sir, I kno i have sheets of steel and aluminum at work I can snag to do what u did, u have any pics from up top

HTC EVO 4G

[mrg7243]

http://i1020.photobucket.com/albums/af322/mrg7243/IMAG0088.jpg

this was before I cut it down.

[finald8ta]

Sweet looks real easy todo

HTC EVO 4G

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0106.jpg

HTC EVO 4G

[DTP]

Looks good!


Sent from my iPod touch using Tapatalk

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0109.jpg

Off to get a new t stat and brake cleaner to clean her up

HTC EVO 4G

[wetamup2k3g]

Oh yeah!! Coming long nicely bro!!

[99galantES]

How much you pay? I'm trying to get one myself

[finald8ta]

How much you pay? I'm trying to get one myself

95$shipped, it was marked for 70$ on car-parts, there is another in NY for 75$ iirc, just give them a call and make sure it has a throttle cable witch is non mivec, that what I did,

HTC EVO 4G

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0111.jpg
All cleaned up and rdy for install

HTC EVO 4G

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0116.jpg
Since I worked all weekend I didn't have time to install it, so I gave it a coat of paint, might aswell start now cleaning up the engine bay

HTC EVO 4G

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0117.jpg
Next week ill get rotors and pads, the front will have to wait since I put new rotors on when I first got the car back in Feb

HTC EVO 4G

[carl3g]

The wrapped CF parts look real good. Should be a nice touch.

[finald8ta]

Idk I have them installed and it does look out of place I'm thinking of wrapping the shift and radio bezal, idk, I would of really like the grey ones better, to go with the sceme I want, I might post up a trade for the grey ones

HTC EVO 4G

[finald8ta]

ok guys I need some help here, I want to replace my cuplers for my cold air intake with better ones made out of silicon, anyone have the sizes I need, I go out to the car and do this my self but I just took my meds and about to pass out, yes I have an eBay Cai, need the diameter on the TB and mag thx

[oakrdrs187]

Manifold looks good.

[finald8ta]

here are the pics of it installed, I'm still fabbing up a plate for the TB cable so for now this will do, my plans now are to re loom the harness near the injectors atleast clean it up with new loom, get another valve cover and paint it silver like the I.M., just order two hid relay harness so I can put them in the fuse box under the hood, witch will help clean the engine bay, I can't use my eBay strut bar because it will hit the map sensor on top of the mani, so I'm looking into a 3g strut bar or something else,
buddy of mine has more pics from the install.
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0120.jpg

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0122.jpg

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0119.jpg

and this came in Monday.
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0124.jpg

more to come

[Isaurio]

How does it idle?

[finald8ta]

I'm idleing fine, at first I had a huge leak at the TB, my buddy put the gasket on wrong, fixed that and I'm good, I bumped up the biss screw abit, I'm at 850/900 in park and in drive I'm at 650/750. I'm about to play with the biss screw to bring it down and see what happens, but other then that I don't have an odd idle any more, car vidrate abit under load at a stop because the back motor mount is fucked up, going to swap it out with the new one pic above, or my balance shaft is off

[finald8ta]

heres some of the pics i of the install
i just want to say thanx to isaurio for helping me with my idle issue

me starting to tear into it,
http://xecofl.com/forum/MGalleryItem.php?id=2845
me checking inspecting and double checking my work
http://xecofl.com/forum/MGalleryItem.php?id=2851
the huge crack as you can see,
http://xecofl.com/forum/MGalleryItem.php?id=2849
INTAKE fully assemble
http://xecofl.com/forum/MGalleryItem.php?id=2852

[02redgalant]

looks like fun

[finald8ta]

Can anyone guess what I did?
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0138.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0140.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0141.jpg
Made a bracket for the throttle cable
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0139.jpg
HTC EVO 4G

[99galantES]

Does it work right putting the relays where you did?

[finald8ta]

Yes, its more protected from the elements, all I did was de pin it from its socket one at a time and placed it in the main fuse box,

There's two spots for relays Togo, fogs and headlights

If you like ill post a how to on home I did it but its self explanatory
HTC EVO 4G

[finald8ta]

I was reading another thread about intake spacers from outlaw engineering, only thing is they don't have one for the 4g64, will the one from a 4g63 work

http://www.outlawengineering.com/mitsu4g6395frame.html

What are your thoughts on this.
Sent from my PC36100 using Tapatalk

[Corey2kG]

I no see cables lol

[Isaurio]

I was reading another thread about intake spacers from outlaw engineering, only thing is they don't have one for the 4g64, will the one from a 4g63 work

http://www.outlawengineering.com/mitsu4g6395frame.html

What are your thoughts on this.
Sent from my PC36100 using Tapatalk

Is not the same the 63 is different dan our 64 72 and 74 tb. I dont think it will bolt right up.

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0172.jpg

Sent from my PC36100 using Tapatalk

[mrg7243]

Is not the same the 63 is different dan our 64 72 and 74 tb. I dont think it will bolt right up.

same flange patteren

[Isaurio]

Are u Sure. Can u use a diamante tb on the evo intake mani?

[finald8ta]

Has any one put an intake mani from an EVO on the 2.4 head?, if so it would work,

Sent from my PC36100 using Tapatalk

[Isaurio]

Cant be done. Only the 03 outlander

[finald8ta]

Does anyone make one for the 4g64 at all?

Sent from my PC36100 using Tapatalk

[Isaurio]

For the SOHC maybe custom rare. Just get a kia or sonata DOHC head.

[mrg7243]

Are u Sure. Can u use a diamante tb on the evo intake mani?

you could if you wanted to but I belvie the evo is either 60 or 65mm. but the throttle cable comes on the wrong side so custom routing is going to me needed

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0191.jpg

Picked this up last night for 300$ with everything to do the swap.
I'm Gona use the clutch kit that it came with since its still new and only has 1000 miles on it.
Also just order new shift linkage bushings and a few other things

Sent from my PC36100 using Tapatalk

[Galantman03]

Has any one put an intake mani from an EVO on the 2.4 head?, if so it would work,

Sent from my PC36100 using Tapatalk

You want me to check bolt patterns? i have both at the moment, but I believe people that have done the dohc swap have used the outlander manifold on the evo 8 head, which means eveything should be interchangeable
Nice pick up BTW

[finald8ta]

You want me to check bolt patterns? i have both at the moment, but I believe people that have done the dohc swap have used the outlander manifold on the evo 8 head, which means eveything should be interchangeable
Nice pick up BTW

If you can that be great, and it be even better if you can get some pics, I was wanting to use a intake spacer that I metioned before,

And thanx

Sent from my PC36100 using Tapatalk

[E_Emerson88]

OMG so clean! lol

[mrg7243]

You want me to check bolt patterns? i have both at the moment, but I believe people that have done the dohc swap have used the outlander manifold on the evo 8 head, which means eveything should be interchangeable
Nice pick up BTW

Just to save you the hassle they are no the same.

this thread shows the side by side
http://www.club3g.com/forum/3g-eclipse-rs-gs-specific/135811-how-evo-8-throttle-body-swap-w-tps-pin-outs.html#post2844221

[finald8ta]

Thanx buddy

Sent from my PC36100 using Tapatalk

[finald8ta]

Check list


5speed tranny
Shift linkage
Shift linkage bushings
Shifter base
Shifter base bushings
Shifter knob Oem
Brake pedal
Clutch pedal
Master cylinder
Slave cylinder and hard lines
Tranny mount
Clutch kit
New throw out bearing
Starter plate
Prothane insert for tranny mount
3g strut bar
Rear disc rotors
Rear disc backing plates
Rear calipers
Front and rear pads
Ebrake lines

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0202.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0201.jpg
Was going to install everything this weekend untill i found out I have another side job.... It pays well so I can't pass it up,


Also project 3gst is on hold till I have time, buddy of mine is in no rush for it to be finished, I rather take my time with it and make sure I do it right
If you look closely you will see some parts I didn't mention.
Sent from my PC36100 using Tapatalk

[QnzMostWanted]

u wont need that starterplate on a 2.4...just so u know

[finald8ta]

u wont need that starterplate on a 2.4...just so u know

Well I got everytging for a steal, 300$ and all I had todo was help him drop the motor and use my tools since he didn't have any.

Sent from my PC36100 using Tapatalk

[oakrdrs187]

Check list


5speed tranny
Shift linkage
Shift linkage bushings
Shifter base
Shifter base bushings
Shifter knob Oem
Brake pedal
Clutch pedal
Master cylinder
Slave cylinder and hard lines
Tranny mount
Clutch kit
New throw out bearing
Starter plate
Prothane insert for tranny mount
3g strut bar
Rear disc rotors
Rear disc backing plates
Rear calipers
Front and rear pads
Ebrake lines

[IG]http://img.photobucket.com/albums/v55/FinaL_data/IMAG0202.jpg[/IMG]
[IM]http://img.photobucket.com/albums/v55/FinaL_data/IMAG0201.jpg[/IMG]
Was going to install everything this weekend untill i found out I have another side job.... It pays well so I can't pass it up,


Also project 3gst is on hold till I have time, buddy of mine is in no rush for it to be finished, I rather take my time with it and make sure I do it right
If you look closely you will see some parts I didn't mention.
Sent from my PC36100 using Tapatalk

Ooooooo!! Treasures!!

[finald8ta]

5speed swap is complete, it was a pain in the ass, yet I did it, tomorrow is another day, have to recheck everything, put the interior back together and clean her off and head out to a car meet Sunday night,

I'll post up pic in abit,

Sent from my PC36100 using Tapatalk

[Corey2kG]

Ypur gonna feel that shit tomorrow lol

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/DSCN0881.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0880.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0879.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0878.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0877.jpg
http://img.photobucket.com/albums/v55/FinaL_data/DSCN0876.jpg

this was all i could get for pics being under a huge deadline, it was bad enough my hands and arms were locking up on me witch was a first, not sure if it was stress that was getting to me or me argueing with my unlce telling me im doing it worng...

[finald8ta]

Hey need some info from any 5speed members, after going manual I notice my clutch pedal catches up top when I release the clutch pedal, I kno there's an adjustment and I haven't messed with it yet, the clutch is brand new with already 1000 miles on, I just want to kno where it should be engaging?

Up top, in the middle? Where?

Sent from my PC36100 using Tapatalk

[OMEGA PHX]

I got ya:
http://i195.photobucket.com/albums/z290/OMEGAPHX/clutch.png
http://i195.photobucket.com/albums/z290/OMEGAPHX/clutch2.png

[4g63lover]

I'm not sure about other 5speed Galants but mine engages at the bottom. Though I'm on a 2g/3g clutch/flywheel combo.

[finald8ta]

Thnx guys for that info, as for adjusting my pedal its within spec,

Only thing that concerns me is where it should be engaging and disengaging,

Mine engages within 1.5in from the top when I release the pedal, and about .75in when I disengage the pedal when I push it in,
Sent from my PC36100 using Tapatalk

[OMEGA PHX]

Basically where ever you feel comfortable, for me it feels better disengaging at the bottom

[finald8ta]

Mmm I guess its Gona be one of those days that I'm Gona have to play with adjusting the pedal,

I'm fine with it at top just wanted to kno if that was normal

Sent from my PC36100 using Tapatalk

[finald8ta]

Ok so since I'm 5speed I need to know what you guys are using for a shift boot?

Sent from my PC36100 using Tapatalk

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0213.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0214.jpg

[oakrdrs187]

How's she running with the outlander Mani?

[finald8ta]

Awsome sounds great with a cold air intake and k&n filter..

Sent from my PC36100 using Tapatalk

[oakrdrs187]

Cool, wish my bay had that much progress... especially 5spd.

[finald8ta]

Iv only been driving the G for a yr now and personally I can't believe I did all this work in 1yr.

Crazy yet well worth it,
Just keep an eye out for a parts car on Craigslist like I did and help them pull the motor for a better deal.

Sent from my PC36100 using Tapatalk

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0237.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0236.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0235.jpg

never did post pics of the rear disc swap due to my phones sd card taking a crap.
i ended up painting the hats on the rear rotors so there will be no rust showing..
and replaced the front pads and put a fresh coat of paint on them

[02redgalant]

guess i wasn't the only one working on brakes today, I rebuilt my rear brembos today..you need some fender liners ! lol

[finald8ta]

guess i wasn't the only one working on brakes today, I rebuilt my rear brembos today..you need some fender liners ! lol

well i did have a set installed but with the 215-50-17 it took the rest of it out, and doing sudden braking on my old rims didnt help out ether had no choice but to remove them,

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0329.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0328.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0327.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0333.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0335.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0334.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0340.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0337.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0338.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0336.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0339.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0341.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0344.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0343.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0342.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0345.jpg

looking for another Galant with no body damage, and im going to swap everything over.
the car has seen to many recks and its bad enough that the air bags have been deployed,

this can be fixed and if i do fix it up i have some big plans for it, can i say rwd... 6g75 motor.. maybe awd. dont really kno

[Isaurio]

That sucks. Just weld another front support

[bgood12]

It really not to bad to fix that, just depends what u wnat if had lotta body damage and that then maybe starting with new g makes sense, but if u can't find a cheap one get ASA get part numbers for body part have a shop undo the spot welds and check dimensions and ur golden then put everything back on yourself.

[finald8ta]

It really not to bad to fix that, just depends what u wnat if had lotta body damage and that then maybe starting with new g makes sense, but if u can't find a cheap one get ASA get part numbers for body part have a shop undo the spot welds and check dimensions and ur golden then put everything back on yourself.

The core support can be replaced, iv don't it before on a few diff cars. It just the car has been in a few recks before I owned it and personally its un safe, ill use this car as a future project that no one has attempt todo which is v6 rear wheel drive

Sent from my PC36100 using Tapatalk 2

[wetamup2k3g]

Damn that sucks. It looks salvageable, but it's probably not a bad idea to find a better body G and swap parts over. Get a non-running one from an auction or something.

[QnzMostWanted]

i found him a gtz with a blown transmission for 600 but he's slacking

[finald8ta]

i found him a gtz with a blown transmission for 600 but he's slacking

It was sold.

Sent from my PC36100 using Tapatalk 2

[QnzMostWanted]

oo that sucks

[bgood12]

Hey I just remebered if u do rebuild I have front bumper in that color if we can find some cheap shipping ill give it to ya for like 60 bucks or whatever. I have shipped door panels to Florida from Kansas and it was like 80 and for all four I charged like 150 maybe, so if u are rebuidling ill give it to u cheap better than me scraping it.

[finald8ta]

Hey I just remebered if u do rebuild I have front bumper in that color if we can find some cheap shipping ill give it to ya for like 60 bucks or whatever. I have shipped door panels to Florida from Kansas and it was like 80 and for all four I charged like 150 maybe, so if u are rebuidling ill give it to u cheap better than me scraping it.

I'll let you kno

Sent from my PC36100 using Tapatalk 2

[2002BlackDragon]

Or you could always get the bumper i have for sale... lmao

But really, good luck on the rebuild and hope your back on the road soon.

[4g63lover]

Just putting this out there for a reference for future 5-speed swappers. The adjustment for the clutch pedal is by feel when it comes to the Galant. You cant really go off the spec in the manual since it for the Eclipse. This is from my experience seem like the pedal has better travel in the 3g than the Galant. I adjusted my pedal up until the clutch disengaged and I didnt adjust any further. 15psi of boost and no slip whatsoever..

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0348.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0349.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0347.jpg
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0350.jpg
got these on ebay, for 125$ and they are in perfect condition
still need to get core support and hood,
also got more pics to take of all the the parts i got from rockauto

[2002BlackDragon]

Buy my front bumper! lmao

[finald8ta]

in a good mood, just picked up a spare motor for a little project i been wanting todo for awhile,

should i go DOHC and turbo or stay SOHC and turbo,

what todo what todo.....
let me hear your input on this

[Corey2kG]

Be a vagina!!!!!!!!!!! DO THAT!!!!!!!! lol cupcake!

[finald8ta]

Be a vagina!!!!!!!!!!! DO THAT!!!!!!!! lol cupcake!

i thought we had an agreement that the name calling was only used for texting? and not to be said on the forum.

danm you fruitcup, lol

[Corey2kG]

i thought we had an agreement that the name calling was only used for texting? and not to be said on the forum.

danm you fruitcup, lol

WOWWWWWW thats gay Joey lol that box is just sitting here for you waiting

[QnzMostWanted]

Dohc and turbo

[gallant]

http://i27.photobucket.com/albums/c156/jose-is2cool/cell%20phone/IMAG0618-1-1-1-1-1.jpg
How it sits now

[finald8ta]

nice

looking for s new shell then my plans will be set i stone

[finald8ta]

well i gave it alot of thought and well i decided to go BOOST, since i finished up my buddies 3g GST he gave me all of his old parts,
the list of what i have
stock evo 8 turbo manifold
evo 8 turbo(needs a rebuild, waste gate flapper valve doesnt seal properly,need ideas)
bunch of intercooler pipe
evo 8 fuel rail
walbro 255 fuel pump

what i need
injectors
down pipe
BOV
intercooler

the start of this build will happen when i find another shell to swap everything over, pull the spare motor and build it up, im still not sure if im gona do a stock build or build it for boost

[finald8ta]

and not a single fuck was given..

[Galantman03]

Sorry man, i have finals. Any ways, i has an intercooler for sale, evo 8. 4g or 6g?

[gallant]

did you ever finish the plastidip project?

[finald8ta]

did you ever finish the plastidip project?

No. I still have 6cans of it, just Gona wait till I get a new shell

Sent from my PC36100 using Tapatalk 2

[gallant]

Any spare parts throw them my way ;)
I have your hood struts. I'll give them to you when you get your shell.

[Ivory8g]

Whoa I missed this thread! I like what I see!

[finald8ta]

Whoa I missed this thread! I like what I see!

Did you get my PM? Ivory8g

Sent from my PC36100 using Tapatalk 2

[Ivory8g]

Oh whoa I didnt even see the notification! I'll hit you up man!

[finald8ta]

well i been collecting parts
as of right now i have and what i paid. talk about a budget build goal is to be under 600$

evo 8 turbo - FREE
evo 8 uicp - 15$
evo 8 licp - 15$
evo 8 fuel rail/fpr - 20$
evo 8 down pipe / o2 housing - 45$
evo 8 ECU - FREE
(not sure if i want to wire
this in or use the factory ECU)


need
EVOM
evo 8/9 turbo hotside - $$$$$$
injectors - 80-100$
evo maf - 80$
evo oil pan - 20-40$
evo oil filter housing - 20-40$
intercooler - 70$ (EBAY)
turbo gaskets o2, mani - 50$ (rockauto)
j-pipe
wastegate
exhaust flangs
oil feed and return lines
water feed and return line (turbo side)
and miscellaneous other crap i might need

most of the stuff i found on evom, and awaiting PMs
other then that i can wait


pics will be up this weekend after i clean and organize the garage

[greddy]

get the evo ecu, trust me.

[finald8ta]

i have the ecu right here next to me with pigtails, just not sure if i feel like dealing with the wiring, granted i have no problem dealing with electronics, and it will be a cake walk for me, i like the idea that we are able to tune are stock ecu with out the hassle of wiring in the evo ecu,

[finald8ta]

mmm i might make my own pnp harness, like denver did with his 6g, i have a 3g auto ecu.. yea that sounds like a great idea

[OMEGA PHX]

Evo ecu is the way to go for turbo G's, pay over $50 for the evo MAF, to use the evo oil pan you also need the evo oil pickup, (I didn't see it listed so), although they are a bit more money I would get dark blue subaru 565cc injectors, they are plug and play so no resistor box. I wouldn't put a tight budget since its always the small stuff that makes you go over it.

[finald8ta]

some of the items i have listed are optional, thats if im able to find them cheap.
this is going to be a slow build because i have more plans thats im keeping hush hush.

correct me if im wrong but i thought other members didn't use the evo oil pick up and used the stocker.

greddy did you use the evo oil pick up

[greddy]

I used the evo oil.pickup

[OMEGA PHX]

This is a pic from Pale Horse on Club3g,
Top one is the evo with its pick up and bottom one is the 2.4:
http://img84.imageshack.us/img84/2850/img0725b.jpg

[finald8ta]

This is a pic from Pale Horse on Club3g,
Top one is the evo with its pick up and bottom one is the 2.4:
http://img84.imageshack.us/img84/2850/img0725b.jpg

thx Omega Phx for the visual, just picked up a evo 9 maf and WRX 440 injectors,
soon ill be working on a pnp harness for the evo 8 ecu

[Ivory8g]

You definitely have to use the evo pickup with the pan. On my first car I didnt know this since it is one of things that gets swept under the rug. I ended up picking one up.

[finald8ta]

You definitely have to use the evo pickup with the pan. On my first car I didnt know this since it is one of things that gets swept under the rug. I ended up picking one up.

if you come across another let me kno. i plan to use the stock evo dowpipe as well and run a high flow cat with a cat back exhaust,

[Ivory8g]

For sure man! I think I know of one for sale actually. Let me see if its still available

[Galantman03]

You definitely have to use the evo pickup with the pan. On my first car I didnt know this since it is one of things that gets swept under the rug. I ended up picking one up.

I wonder what might happen? actually idk if it will fit lol

[OMEGA PHX]

I wonder what might happen? actually idk if it will fit lol
I posted a pic above with both oil pans side by side, there you can see that the pick up enters in a different place on the evo one therefore you need the evo pick up to be able to install that pan

[Ivory8g]

Yep pretty much. On ivory i even cut the old pickup and had it welded and it still wasn't right.

[Galantman03]

I posted a pic above with both oil pans side by side, there you can see that the pick up enters in a different place on the evo one therefore you need the evo pick up to be able to install that pan

I know what they look like, I had to swap them out also. I was stating that, even that they bolt up to the same spot, if you manage to fit the the 4g63 oil pan with the 64 pick up tube, I wonder what the effects would be.

[finald8ta]

getting close just bought another evo8 turbo for real cheap, also down pipe and o2 housing came in, no sure if im going to use the oil sandwich adapt of pick up a evo oil filter houseing yet, also got stainless braided oil and water line as well, just need to figure out the rest of the length to where it will connect to, ill do that once i have it all mocked up, still need a wide band, boost gauge, oil pan, exhaust flanges, and intercooler

should i use the evo FPR or run an after market one? i picked up a fpr adapter and guage.
oil pan is questionable, not sure if i can find a evo one for cheap or just modify the stocker

[Ivory8g]

getting close just bought another evo8 turbo for real cheap, also down pipe and o2 housing came in, no sure if im going to use the oil sandwich adapt of pick up a evo oil filter houseing yet, also got stainless braided oil and water line as well, just need to figure out the rest of the length to where it will connect to, ill do that once i have it all mocked up, still need a wide band, boost gauge, oil pan, exhaust flanges, and intercooler

should i use the evo FPR or run an after market one? i picked up a fpr adapter and guage.
oil pan is questionable, not sure if i can find a evo one for cheap or just modify the stocker

Nice!!! A lot of people are going with the evo filter housing since it sits up higher. I had a greddy sandwich adapter plate and am rocking that. I use mitsu filters so maybe thats why it seems to sit higher up this time around. I used the stock evo fpr both times and its awesome. 1:1 rising rate is all you need until you need to start running specific fuel pressure to get every drop of flow out of your fuel system. The oil pan and pickup is just a searching game

[finald8ta]

Had a blast getting the G dyno, video and pics will be up shortly

Sent from my PG86100 using Tapatalk 2

[Isaurio]

I know what they look like, I had to swap them out also. I was stating that, even that they bolt up to the same spot, if you manage to fit the the 4g63 oil pan with the 64 pick up tube, I wonder what the effects would be.

Cant bee done. The g oil pick up tube is way long. Even if u cut the evo pan to fit the g pick up is inches alway from touching the bottom of the pan. Not good for oil flow, you will end up bottlenecking the oil flow.

[Isaurio]

Had a blast getting the G dyno, video and pics will be up shortly

Sent from my PG86100 using Tapatalk 2

Keep us posted.

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/th_myfirstdynorun_zps5b8f76e5.jpg (http://smg.photobucket.com/albums/v55/FinaL_data/?action=view&current=myfirstdynorun_zps5b8f76e5.mp4)

http://img.photobucket.com/albums/v55/FinaL_data/myfirstdynosheet_zpsc76cf727.jpg

let me kno what you guys think, she really needs a tune to maximize all the mods i have

[OMEGA PHX]

A tune would make a little more power and make it smoother, but if your going turbo I wouldn't waste money for a n/a tune

[finald8ta]

it will be some time before i go boost, before i go boost i like todo some autox, and get a feel the car before i go boost,
i have my own reasons for this, i just dont want to go straight into autox with a turbo car,

[wetamup2k3g]

I enjoyed that video, had a big smile on my face, it sounds so much like my old car! Man I miss that car, that 4-banger has a distinctive sound. All things considered that's not bad for a fully stock motor, but yeah I'd think you could gain a little more from bolt-ons, but I guess that all depends on the tune.

[finald8ta]

I enjoyed that video, had a big smile on my face, it sounds so much like my old car! Man I miss that car, that 4-banger has a distinctive sound. All things considered that's not bad for a fully stock motor, but yeah I'd think you could gain a little more from bolt-ons, but I guess that all depends on the tune.


same here man, i was smiling from ear to ear, i told him to bring it to redline, if i didnt have an exhaust leak it have a more deeper tone,

[Exhaust power]

Looking at your graph itll make a lot more power with a tune. Your peak tq and hp are way early! and are engines normally peak hp at 5500. I wonder is the outlander manifold longer then the galants?

[Silvertune]

Are you running a cat? Where are your air fuel ratios?

Those two things could completely justify that graph. Cat's ruin these things and your AFR's could very well be in the single digits.

[finald8ta]

i ask if they can do arfs, butt the tuning session they did the night before on a corvette broke the sniffer, im still running a cat, and i have a slight exhaust leak by the flex pipe i welded in place, i do have an axle back exahaust (ebay).

[Silvertune]

Axle back nets you literally nothing. A decent header with a cat delete and an appropriate tune would make a massive difference.

[finald8ta]

i dont want to run catless, i like to keep it quit as possible (sleeper), maybe a high flow cat and a full cat back later down the road, and as for a header, i heard theres really no gain from it, unless i was cali spec and im not,
im positive a tune will wake it up abit more and put me in the 130hp/150trq ish range for what i have, i do plan to go turbo sometime this yr, i just like to see my car evolve, im leaving my self alot of room for upgrades, instead of going straight for it,

[Silvertune]

Well hate to break it to you but 115whp isn't much of a sleeper. If that car doesn't go fast there isn't much justification in something if that is your end goal.

Fed spec manifolds are no where near as restrictive as cali specs but they offer zero emphasis anywhere in your power band. People say a header does nothing on the 4 popper because the people who put them in have stock ones and get crappy headers. Your engine isn't going to put more out if it can't pull more in. Likewise it won't pull more in if it can't put more out. A good header promotes performance and that is very different from simply not hindering it. Even if you gained 10wtq a breath off idle to redline you will pick up untold amounts of time. That dyno graph is the epitome of choking and being rich. People with far less modified setups have produced number that would smash yours.

[finald8ta]

silver i completely understand what your saying, i have no desire to get a header in the near future because i plan to go turbo, for what i have im happy with it, if i can produce 130hp with this setup on a tune, ive hit my goal, im not looking for big numbers with a NA build, even if i do get a header and full exhaust, ill end up having to sell it and thats something i dont want to deal with

[Ivory8g]

This is the same thing I did on both of my galants. I didnt even do an intake let alone headers because I knew I was going to go turbo. Nothing wrong with that at all. If you ask me its intelligent execution. I'm sure this car is running super rich. Timing isnt that bad actually. I've looked at logs from the dyno run and it just needs some adjustments to wake it up. When I went 5 speed on my first galant I walked plenty of cars. You just have to choose your battles.
You dont have to have 500whp and 400wtq to have fun or to walk people. you can do it with an auto and 130whp. 90% of it is application

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/8th%20gen%20galant%20turbo%20build/IMAG0029_zpsa56c86e1.jpg
http://img.photobucket.com/albums/v55/FinaL_data/8th%20gen%20galant%20turbo%20build/IMAG0028_zps024ca5ae.jpg
http://img.photobucket.com/albums/v55/FinaL_data/8th%20gen%20galant%20turbo%20build/IMAG0027_zpsb292f5b4.jpg
http://img.photobucket.com/albums/v55/FinaL_data/8th%20gen%20galant%20turbo%20build/IMAG0026_zpsb46782d7.jpg
http://img.photobucket.com/albums/v55/FinaL_data/8th%20gen%20galant%20turbo%20build/IMAG0025_zpse2938423.jpg
evo8 16g turbo, in great condition, no shaft play

http://img.photobucket.com/albums/v55/FinaL_data/8th%20gen%20galant%20turbo%20build/IMAG0024_zpse7bb0869.jpg
evo 8 ecu with pig tails

http://img.photobucket.com/albums/v55/FinaL_data/8th%20gen%20galant%20turbo%20build/IMAG0022_zps7943173e.jpg
WRX 440 injectors

http://img.photobucket.com/albums/v55/FinaL_data/8th%20gen%20galant%20turbo%20build/IMAG0021_zps4560b0b7.jpg
oil sandwhich adpater, with 1/8 plugs and 1/8 to -6an oil oil feed line( should of ordered another set for navy)

http://img.photobucket.com/albums/v55/FinaL_data/8th%20gen%20galant%20turbo%20build/IMAG0020_zps646ed616.jpg
water and oil feed lines

http://img.photobucket.com/albums/v55/FinaL_data/8th%20gen%20galant%20turbo%20build/IMAG0019_zps2911cd1e.jpg
evo16g j pipe

http://img.photobucket.com/albums/v55/FinaL_data/8th%20gen%20galant%20turbo%20build/IMAG0018_zpse0464297.jpg
starter brush repair kit

http://img.photobucket.com/albums/v55/FinaL_data/8th%20gen%20galant%20turbo%20build/IMAG0017_zpsc0528fe4.jpg
oil drain kit

not pictured is evo8 down pipe and o2 houseing

more to come,

[Ivory8g]

Noice!! What are you going to do for a harness for the evo ecu?

[finald8ta]

Noice!! What are you going to do for a harness for the evo ecu?

I have a auto ecu, from the 3g I fixed up, so the plan is to male a PNP harness, like qnzmostwanted did for his 6th gen

Sent from my PG86100 using Tapatalk 2

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/8th%20gen%20galant%20turbo%20build/IMAG0030_zpsfc4180eb.jpg
http://img.photobucket.com/albums/v55/FinaL_data/8th%20gen%20galant%20turbo%20build/IMAG0031_zps3b02a909.jpg
http://img.photobucket.com/albums/v55/FinaL_data/8th%20gen%20galant%20turbo%20build/IMAG0033_zps5e583dc6.jpg

picked these up realy cheap on evom, brand new, only thing i need now is AFR gauge

[M-Rod]

Can't wait to see you double your numbers when you get that turbo in. Those gauges are effin nice!

[Ivory8g]

Dayum! second that. Those gauges are sick!

[finald8ta]

Can't wait to see you double your numbers when you get that turbo in. Those gauges are effin nice!
i cant wait ether, still looking for another g to star this project tho,


Dayum! second that. Those gauges are sick!
thxx bro, for 150$ i cant complain, it was ether this or glowshift gauges from ebay, still need to get the aem AFR gauge, and some gauge pods, i have a idea where i want to mount them and it will not be on the A-pillar , not in the 1.5 radio din mounts, or dash mounts, it will be somthing different,

[Ivory8g]

Very nice! cant wait to see the update on that!

[gallant]

i cant wait ether, still looking for another g to star this project tho,


thxx bro, for 150$ i cant complain, it was ether this or glowshift gauges from ebay, still need to get the aem AFR gauge, and some gauge pods, i have a idea where i want to mount them and it will not be on the A-pillar , not in the 1.5 radio din mounts, or dash mounts, it will be somthing different,

i know where :)

hey joe do you still have the picture of my Dyno. I cant find my paper. I dont know where i put it.

[finald8ta]

i know where :)

hey joe do you still have the picture of my Dyno. I cant find my paper. I dont know where i put it.

Yea I got a photo of it

Sent from my PG86100 using Tapatalk 2

[gallant]

Can you throw it on my thread or send it to me. Thanks
The gauges are sick! Btw

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0049_zps89bb9ba7.jpg

[gallant]

Wow
Looking good

[Isaurio]

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0049_zps89bb9ba7.jpg

Ahh you got one. Looking good.

[QnzMostWanted]

nice, now send me ur N/A stuff

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0052_zpsd367a11b.jpg

heres the difference between the stock intake an injen, thanxs to isaurio for posting pics of it in his build, and the hunt was on. paid 75$ shipped and it came with a k&n filter and maf adapter

[finald8ta]

nice, now send me ur N/A stuff

lol the only na stuff i can give you is the header, stock injectors

[finald8ta]

http://img.photobucket.com/albums/v55/FinaL_data/IMAG0089_zps60579966.jpg (http://smg.photobucket.com/user/FinaL_data/media/IMAG0089_zps60579966.jpg.html)
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0090_zps5f518418.jpg (http://smg.photobucket.com/user/FinaL_data/media/IMAG0090_zps5f518418.jpg.html)
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0091_zpsb61ac01a.jpg (http://smg.photobucket.com/user/FinaL_data/media/IMAG0091_zpsb61ac01a.jpg.html)
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0092_zps7c7372a5.jpg (http://smg.photobucket.com/user/FinaL_data/media/IMAG0092_zps7c7372a5.jpg.html)
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0093_zpscd8dce4c.jpg (http://smg.photobucket.com/user/FinaL_data/media/IMAG0093_zpscd8dce4c.jpg.html)
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0094_zps978cf2c9.jpg (http://smg.photobucket.com/user/FinaL_data/media/IMAG0094_zps978cf2c9.jpg.html)
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0095_zps2ecc9ecc.jpg (http://smg.photobucket.com/user/FinaL_data/media/IMAG0095_zps2ecc9ecc.jpg.html)
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0096_zpsefb37a1a.jpg (http://smg.photobucket.com/user/FinaL_data/media/IMAG0096_zpsefb37a1a.jpg.html)
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0097_zps2b6879bb.jpg (http://smg.photobucket.com/user/FinaL_data/media/IMAG0097_zps2b6879bb.jpg.html)
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0098_zps0e86fa2b.jpg (http://smg.photobucket.com/user/FinaL_data/media/IMAG0098_zps0e86fa2b.jpg.html)
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0099_zps100d8dac.jpg (http://smg.photobucket.com/user/FinaL_data/media/IMAG0099_zps100d8dac.jpg.html)
http://img.photobucket.com/albums/v55/FinaL_data/IMAG0100_zps4b7d8e3b.jpg (http://smg.photobucket.com/user/FinaL_data/media/IMAG0100_zps4b7d8e3b.jpg.html)

clutch fell apart on me on the way home from work, ended up having to put an oem clutch in for the time being,
and the new plan is to find another G keep it AUTO and turbo it,

[gallant]

you now have to update you sig bro lol

[finald8ta]

I'm to lazy, been working on my brothers GSX I need to find a fuel pump sending unit for it,

Sent from my PG86100 using Tapatalk 2

[gallant]

get some pictures on here to keep everyone posted

[gallant]

Every picture you posted has crashed
Are you making an ivory v.2 build thread?

[finald8ta]

i think i cleaned up my photo bucket few months ago,

and i already have a build thread for the new ivory