Joker96
04-06-2011, 02:11 PM
I got in a car accident a year ago and it destroyed my drier and some lines i replaced those got the system vacumed and sealed and some gas in it today. When i turn the ac on nothing happens just the blower turns on but compressor still off and fans also so the guy that did the work looked at the ac cables coming out of the compresor he found cables disconected like they go nowhere. He applied cjrrent to the cable and compresor worked but fans stayed off wich made the valve release the gas. So all this takes me to the following.. Is there a wiring driagram of the ac system??? I found a looot of cables around the engine bay disconected just laying there broken ill upload pics in a few.
what am trying to do is get all like its supposed to be i want my compressor and fans to turn on when i turn ac on. they are not working like that atm. fans turn on and off depending on temp regardless of the ac being on and ac stays off obviously my mechanic did something when he installed that fan, did timing and removed balance shaft. if you guys could take a picture of your drier and compresor wiring it would be very helpful. btw the guy that got the ac gas said something about a sensor or something on the drier wich my car doesnt have.
cable coming out of compressor
http://i1193.photobucket.com/albums/aa352/osky087/aee427fb.jpg
same cable
http://i1193.photobucket.com/albums/aa352/osky087/1ae81db9.jpg
cables in front of battery 2 cables go to 1 of the fans the left one other 2 are disconeced (this fan was replaced by my mechanic and he made those conections)
http://i1193.photobucket.com/albums/aa352/osky087/6639a619.jpg
cable behind fuel rail also just there disconected
http://i1193.photobucket.com/albums/aa352/osky087/d9b6b39c.jpg
next to the alternator
http://i1193.photobucket.com/albums/aa352/osky087/05be9f44.jpg
what am trying to do is get all like its supposed to be i want my compressor and fans to turn on when i turn ac on. they are not working like that atm. fans turn on and off depending on temp regardless of the ac being on and ac stays off obviously my mechanic did something when he installed that fan, did timing and removed balance shaft. if you guys could take a picture of your drier and compresor wiring it would be very helpful. btw the guy that got the ac gas said something about a sensor or something on the drier wich my car doesnt have.
cable coming out of compressor
http://i1193.photobucket.com/albums/aa352/osky087/aee427fb.jpg
same cable
http://i1193.photobucket.com/albums/aa352/osky087/1ae81db9.jpg
cables in front of battery 2 cables go to 1 of the fans the left one other 2 are disconeced (this fan was replaced by my mechanic and he made those conections)
http://i1193.photobucket.com/albums/aa352/osky087/6639a619.jpg
cable behind fuel rail also just there disconected
http://i1193.photobucket.com/albums/aa352/osky087/d9b6b39c.jpg
next to the alternator
http://i1193.photobucket.com/albums/aa352/osky087/05be9f44.jpg