Rear emblem

[DjFlav3]

Hey G center I was thinking about shaving my rear emblems (the galant and the mitsu emblem) and was wondering if any knew if the rear mitsu emblem is glued on or if there's a 'peg' on the rear. In other words if I remove it will there be a hole I have to fill. Any feedbacks appreciated thanks.

[tr1kst4nce]

Pretty sure they are adhesive applied.

[SirSaula]

Depends the 2007 rear emblem will leave a hole.

[ADExternal]

all G models leave holes

[9Ggts]

It has 3 holes about 5/16 diameter and it also has doublesided tape e . This is for a 2006 galant .

[9Ggts]

This is the emblem only

[DjFlav3]

Ok I'm assuming it would be the same for an 09.

[Gotti]

2010 has a hole in the trunk

[stayer]

Doublesided tape for inscriptions and holes for the logo. I shaving the logo.

[9G]

holes all over.

[9Ggts]

I Used a heatgun on the emblem to loosen the adhesive. Be careful though that you don't melt the paint.

[DjFlav3]

Yea on my Acura we used a hair dryer to loosen the glue. The more you loosen it the less sticky crap you have to take off with goo gone afterwards.

[ADExternal]

hair dryer is safer. Hair dryer > floss > goo gone. Done

[stayer]

Today i removed the emblem of the "Mitsubishi" and made RalliArt. Front emblem RalliArt as well.http://s43.radikal.ru/i099/1104/02/43107e7ea250.jpg (http://www.radikal.ru) http://s40.radikal.ru/i088/1104/a7/aa45490679a1.jpg (http://www.radikal.ru) I have not used the hair dryer. Simply removed the knife and cleaning solvent for paints. No holes., only double sided tape.

[2011GALANTse]

I took my heat gun and slowly took off the back emblems. Then i find the middle EMBLEM has two holes in the back!! ! What a mistake. This was about 2 weeks ago, i can not find a BLACK EMBLEM...the ones ive found on ebay are cheap carbon fiber black

http://cgi.ebay.com/ebaymotors/REAL-CARBON-FIBER-INSERT-REAR-EMBLEM-GALANT-JDM-/220829089506?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3AGalant%7CYear%3A2011&hash=item336a707ee2


...i think i might try them out or just go back to the OEM. Any suggestions??

PS: Anybody know the size of the back emblem that covers the holes?:102:

[9Ggts]

Link below shows dimension of rear (trunk) DSM emblem. That ebay emblem looks like 3 diamond pcs that you put together like a puzzle. Not a one piece



http://i1119.photobucket.com/albums/k628/9gts/IMG_20110911_091706.jpg

[9Ggts]

Oopps sorry .wrong url

[9Ggts]

Letss try this.
http://i1119.photobucket.com/albums/k628/9gts/IMG_20110911_091611.jpg

[9Ggts]

And this
http://i1119.photobucket.com/albums/k628/9gts/IMG_20110911_091435.jpg

[ajdesidevil]

i spray painted my emblem matte black and put it back on. i also spray painted the "GALANT" black and managed to turn it into "AJ" and put it back on. The chrome trim and emblem on my grill is also black now :)

[Rayth]

i spray painted my emblem matte black and put it back on. i also spray painted the "GALANT" black and managed to turn it into "AJ" and put it back on. The chrome trim and emblem on my grill is also black now :)

got pics? i'd like to see it... i want to do something with the chrome in the grill but havent decided what exactly

[ajdesidevil]

yeah, i'll get it uploaded asap. right after i get my redskins decal up.. chyeaa!

[Rayth]

yeah, i'll get it uploaded asap. right after i get my redskins decal up.. chyeaa!

get em up! :)