PDA

View Full Version : motor swap question


ixxgh0stxxi
04-11-2011, 06:19 PM
Hello guys, new to the site..... got a question hopefully you guys can help....

So my dad bought a 96 galant motor was bad.. so they gave him a 95 and he noticed that it didnt have a map sensor on the manifold... the guy said it wont matter couse the 96 that we had didnt have a connection for the map sensor anyway???? so he swaps the motor along with the distributor and something with the crank angle sensor or something like that and the car runs like crap.. it revs up then bogs ..??? any ideas on anything
Galanttuner10
04-11-2011, 06:25 PM
put the crank sensor from the 96 on the 95 motor and put the 96 distributor on it as the 95 has the crank sensor in the distributor. see what that does then let us know
ixxgh0stxxi
04-11-2011, 06:40 PM
We did that already and the car idles but when u rev it up it bogs
ixxgh0stxxi
04-11-2011, 06:42 PM
Ur in waterbury huh I live in hartford lol
ixxgh0stxxi
04-11-2011, 06:47 PM
Another thing I don't get is that wen we got the car the 96 motor didn't have a connection for the map sensor????? Is that normal that the map sensor was just on the manifold not connected?
Galanttuner10
04-11-2011, 07:01 PM
ive seen a few without that connection, but they have another sensor type for it i believe. the intake manis should be indentical besides the map sensor, but im not sure what the other ones have besides the map sensor, and that could be your issue.
mko
04-11-2011, 09:03 PM
are you sure it a 96 and not 97. only 97-98 have the emissions free ecu and harness and thats just for some of them.

if its a 96, it has to have the plug for the mdp sensor. look under the intake manifold, or the plug is tucked away somerewhere
Galanttuner10
04-11-2011, 10:50 PM
MKO, i saw the other day a 97 with no emissions stuff but cali spec? no MDP sensor but cali emissions? doesnt make sense to me
mko
04-11-2011, 11:12 PM
yes, only Cali specs were like that for some reason. I know AllRice's galant is like that
allrice4g64
04-12-2011, 12:14 AM
Mdp shouldnt have a affect on how the engine runs. When he swapped the crank sensor did he take the timing belt off? For that matter did he touch any of the timing components? Are the spark plug wires in the correct firing order? DID you do a tune up or at least swap the spark plugs and what not from the old engine over? spark plugs,wires,fuel pressure regulator etc....