PDA

View Full Version : JDM Hi-Beam Bulb!!


WhiteGalant
07-03-2011, 01:44 AM
Ok I know its on here somewhere... Someone posted a link to where I can order the H1 bulb socket adaptor thingy. Does anyone know where it is????
WhiteGalant
07-03-2011, 02:01 AM
http://tapatalk.com/mu/ae991d89-13f6-bbf0.jpg
This damn part!!!

EVO 4G
qcustoms
07-03-2011, 03:11 AM
i have craploads lol....
WhiteGalant
07-03-2011, 09:16 AM
I need one!!! Please! Lol

EVO 4G
oakrdrs187
07-07-2011, 04:36 PM
Will a H7 bulb work in the place? It looks like the connector.
G-spot
07-07-2011, 04:43 PM
i have craploads lol....
there you have it :bowl:

or anyone else living where jdm 8g's are the norm.
oakrdrs187
07-07-2011, 04:50 PM
^^^ He should sell them in baggies on this forum...They would go like crack. LOL.
DOHCstunr
07-07-2011, 04:57 PM
Will a H7 bulb work in the place? It looks like the connector.

The connector would work, but the bulb wouldn't seat in the housing without some modifications. I have no idea ho extensive the modifications. Hell it could be easy for all i know. I just remember the bulb wouldn't even fit through the opening.
Reelax
07-07-2011, 05:07 PM
Will a H7 bulb work in the place? It looks like the connector.

no. the holes in the actual housing are different. that H1 adapter is part of what keeps the bulb snug in to the housing by the clip. an H1 HID capsule w/ plastic base (not the thin metal base) would work however since the flange on it is thicker than a regular H1's flange.
oakrdrs187
07-07-2011, 05:20 PM
That's right the H7 capsule is bigger, like a 9006. H1 is a water drop like and h3.
Then the body of it is flat, well I guess you gotta buy some of that crack from qcustoms.
Reelax
07-07-2011, 06:48 PM
you don't need the adapters at all if you go HID H1 (because the flanges on the majority of HID H1 capsules are much thicker than the bulb versions). alternately, you can just modify the clips on the headlight housing to hold the normal H1 bulb snug by taking a needle nose pliers and re-bending the clip so that it holds the bulb flange tighter to the housing. i did this before i upgrade my hi beams to HID years ago. the wiring would be positive wired to bulb, ground directly to under the screw that holds the clip onto the housing. refer to my tutorial for JDM headlights.
oakrdrs187
07-08-2011, 03:21 PM
I had HID high beams on my 3g with depo projectors, nice and bright. Just took too long IMO when I needed them right away.