PDA

View Full Version : TPS pinout help!!!!


BlackBeauty
08-02-2011, 10:46 PM
Anybody know what the throttle postion sensor wire pinout is? I'm installing a jetchip vforce module and it wants me to tap into the white/red wire..... here's the kicker:082: there's two white/red wires going into the tps harness. If anyone has installed one of these help would be greatly appricated!!!!!
Stewi
08-02-2011, 11:40 PM
Im not that familiar with 9g's, when you say there are two white/red wires, are they identical or is one white with a red stripe and one red with a white stripe?
BlackBeauty
08-03-2011, 07:16 AM
Good question, the pinout chart says red/white. Does that mean red with white stripe?
Palmz
08-03-2011, 12:34 PM
Good question, the pinout chart says red/white. Does that mean red with white stripe?

in most cases yes.
BlackBeauty
08-03-2011, 12:37 PM
Thanks Pernir! Will post once connected!
Stewi
08-03-2011, 12:46 PM
in most cases yes.

+1 ...yep
BlackBeauty
08-05-2011, 10:45 PM
Installed.... And Im glad I didnt spend my own money... I can feel a little more pick up and the shift points seem to be firmer but its really just a on board multi-meter. Snake oil not worth 2 bills....I think I'll stick to actual performance mods from now on. Thanks for the help guys.