intake manifold question

[Torch203]

My intake manifold cracked in my 2000 galant es 2.4l 4 cyl. and I want to know if the 03 galant 2.4l 4 cyl intake manifold would fit to my car? According to the junkyard, it only fits a 03. I want to know if he is correct since I hear that the engine from 99-03 is the same.

[Isaurio]

YES. Galant 99-03. or eclipse 2.4L form 00-05

The mani are really design bad. To upgrade get a 2003 Mitsubishi Outlander intake mani. Only year 2003.

[Torch203]

Just to clarify before I buy the manifold, the 03 outlander manifold would fit on my galant?

[midnight]

yeppers

[Torch203]

Do you know any good sites where I can find intakes? it seems like they are a rare thing to come across.

[Isaurio]

The only place will be a junk yard. Yeah the 03 outlander are rare now.
Go to Car-part.com
2003 Mitsubishi Outlander. Remember make sure is only that year. Thats the only one that will fit. Also get a v6 TB to finish the upgrade. Good luck.

[Torch203]

v6 throttle body right? do I have to get it from a galant or can I use an eclipse?

[Isaurio]

ether one. Look around some member have done it and opened a thread. Type in search.

[Torch203]

that website was the best kept secret. found the intake manifold for 75. Thanks

[oakrdrs187]

You can also use the Outlander TB, but you will also need the TPS from it. Stepsascend has a righteous deal on the V6 TB right now.

https://www.thegalantcenter.org/showthread.php?p=699534#post699534

[oakrdrs187]

Edited this out, re-post from my post above. ????? Not sure why it's happening.

[Torch203]

I bought the throttle body and tps today. In the forum that states the parts u need for outlander intake swap, it said something about havjng to use the outlander's manifold support and the people at the junk yard didn't know what that was. Is it a vital part to complete the swap?

[Isaurio]

Not really. I dont have the support. I have the swap for a year now with no problems Try using the stock one. Make it work.

[oakrdrs187]

Used my stock one. Its bolted to the block and the manifold rests on it.

[Torch203]

cool. is there any performance difference?

[oakrdrs187]

A bit of gain, not much. Outlander manifold is really more of a reliability thing than performance on stock cars. If 5spd or turbo more noticeable difference.

[IVORY_G]

You guys forgot to mention to him to get the Non-MIVEC Intake Mani. Bcz the MIVEC one wont work... Also u can use the Outlander TB, its the same size as the V6 (6G72) motor's. The TB out of the Diamante (6G75) is larger in diameter.

[Torch203]

so would there be no real difference between the v6 tb vs the outlander's since they are the same size? and I bought the 03 outlander's intake manifold. the pictures look like the same engine as mine. I found it for cheap on the car-part website.

[Isaurio]

You guys forgot to mention to him to get the Non-MIVEC Intake Mani. Bcz the MIVEC one wont work... Also u can use the Outlander TB, its the same size as the V6 (6G72) motor's. The TB out of the Diamante (6G75) is larger in diameter.

the 2003 is the only non-MIVEC for the Outlander. From 2004 they started the MIVEC.

[IVORY_G]

so would there be no real difference between the v6 tb vs the outlander's since they are the same size? and I bought the 03 outlander's intake manifold. the pictures look like the same engine as mine. I found it for cheap on the car-part website.
Yes no difference unless you get the TB from the Diamante's V6.


the 2003 is the only non-MIVEC for the Outlander. From 2004 they started the MIVEC.

Oh ok. I said that bcz when doing my search for my IM I had to specify, bcz I ran across 2003's that I was told were MIVEC's...

[oakrdrs187]

Remember that with the Outlander TB you need the TPS too and re-wiring is required.

[Torch203]

I think The re wiring is displayed in the original forum that tells u how to do the swap. Your talking about the 3 wires that go into the manifold right? And what year diamante can I take the tb from?

[Torch203]

I've found the answer to my throttle body question. looks like I've learned the art of SEARCH.

[oakrdrs187]

I think The re wiring is displayed in the original forum that tells u how to do the swap. Your talking about the 3 wires that go into the manifold right? And what year diamante can I take the tb from?


I'm talking about the wires being flipped on the TPS. It is displayed in the original "How To"

[Torch203]

Yeah IVORY_G posted a diagram of the wiring that shows the difference between the Galant and Outlander TPS wiring. Thats what i meant to say in my previous post when I mentioned the 3 wires that go into the manifold. I meant TPS...My fault.