PDA

View Full Version : interior swap


vr4gto
02-16-2012, 05:09 PM
Well the junk yard drug in a black 06 gts yesterday with black leather interior. My 2010 has cloth seats and they are manually operated. The leather ones are power. I'm picking up tomorrow. Just wondering if the wiring will be there in my car is the same as the power seats? It looks like it is.
troubled4g64t
02-19-2012, 08:09 PM
Not usually, when I swamped to leather in my 8g there were no wires I had to run them.
vr4gto
02-20-2012, 10:37 AM
I'm finding that out. I ran wire to them off of the battery and I'm getting power but nothing will work. Tapped into the motors directly to bypass the switch and it won't work. It worked fine in the car it came out of.
vr4gto
02-20-2012, 01:34 PM
Got em hooked up. The fuseable link I bought was junk. The seat works great, but now the srs light is on and the light for the passenger seat
Gotti
02-20-2012, 02:22 PM
Srs connector are the same. May have to recalibrate p/s seat for airbag.
Will have to run your own wire for power seat and heated seat.
vr4gto
02-20-2012, 03:28 PM
Srs connector are the same. May have to recalibrate p/s seat for airbag.
Will have to run your own wire for power seat and heated seat.

Are srs plugs the red ones? Recallibrate how?

I've got the power seats working. The heated part I connected to power but my car didn't come with a spot on the counsel for the switch. The seat got warm quick. Do they have a set temp or is that controlled by the hvac controls and the switch on the counsel is just an on/off deal?
Galantman03
02-20-2012, 05:53 PM
If you have an srs light, you have to go to the dealer to get it reset. And, if you have an srs light, none of the airbags work at all just fyi
vr4gto
02-20-2012, 07:00 PM
When I saw the light I figured I probably should've unplugged the battery before I started unhooking the air bags. Bringing it to the dealer isn't an option as the nearest is 3 hours away now. Had one here for many years but not anymore.
vr4gto
02-20-2012, 11:04 PM
I've got everything hooked up and working but besides the srs light, the passenger seat belt light is on too. I suppose Mitsubishi made it so that has to be reset by them too? Or is that just a possible sensor/wiring issue?