Car wont start after maf and throttle was cleaned

[Joker96]

Hi
I was having some idling problems when car was cold rpms would go crazy up and down up and down so i bought some maf cleaner and throttle cleaner. Cleaned the maf and throttle body but now car wont start, my guess is that since i cleaned the throttle without removing it that sone cleaner went thru the the holes. Any ideas what to try??? thanks

[Galanttuner10]

Check engine light on? You could have damaged the maf and could have damaged the FIAV or IAC with the liquid

[Joker96]

Check engine light have been on since forever lol

[eclipsh]

Check obvious stuff first. Are all the electrical connections plugged back in correctly? Any big air gaps? Does it start at all?

[Joker96]

Well i left the car for a few hours with every hose disconected to kinda let it dry better, tried again and car started theres deffinetly an improvement on the idle but idle is still a bit crazy. Going to leave it like that for a while. Thanks a lot for your help guys

[eclipsh]

Go get your engine codes read and find out what else is wrong.

[DTP]

Might be your IAC.

Since you cleaned the TB, you might have to adjust the BISS screw. Turn it just a little and see how the car responds. Just remember where you started when you do it. Worked for me...

Sent from my LG-P925 using Tapatalk