NEED HELP AGAIN ASAP(DRUMS)

[Los]

I'm tryingto replce my rotors and the are not coming off. I have the caliperand bracket off but not luck on the rotor, is there anything special I need to do?? someone help me........

thanks

[rodt0331]

are you talking about the front or rear rotors?

[Los]

front rotors, I got everything off.... and it looks like the rotors should just pull off but I can't get them to budge

[rodt0331]

dont know why. i got mine pretty easy, the ones that didnt wanna come off were the rear ones ,i had to bit them off with a hammer. sorry i couldnt help but good luck

[balln8g]

just tap it with a hammer...protect it with a piece of 2x4 or something.. if that doesn't work..I dunno bro..

[Los]

just to make sure, I don't have to remove the cotter pin and the nut that nut right? I think that's for the bearings and stuf. right?

I use the hammer....

[rodt0331]

yeah dont take that off

[Strahan]

Mine was a total bitch too. I banged at it with a hammer for quite awhile to no avail. My final solution was to grab a scissorjack and uhh.. jack it off https://www.thegalantcenter.org/style_emoticons/default/smile.gif Put the foot against the inner wheelwell and put the top part against the back of the rotor and slowly raised it up a bit then did the same to the other side and it came right off.

[pinoyesv6]

you guys with your tools. break out your work boots and lightly kick the rotor off of the car. i say lightly cuz u might go crazy and knock your car off its supports and that becomes another problem..

[Los]

that for all the advice guys I finnally got it off...... now I'm having problem with the drums, they are stubborn as hell too....... any other advice for the drums.......just in case anyone is wordering yes I'm doing my brakes and upgrading the from rotors........now bac kto the drum..... any tricks .........