I need your help(look inside)

[B19WHEELS]

My sister in-law ran blew her motor last year so instead of letting me put a motor in her car she let someone work on it that's a complete idiot... I put a motor in it but the car never would start.. Come to find out this guy removed a lot of the relays(I can see scratches where he popped most of them out with a flathead) and put them back in the wrong spot or just left them on the floor board of the car... I figured out that the fuel pump relay wasn't in its place that's why the car wouldn't start.. So now its running but I keep getting this P0743 code which the car didn't have before.. So I figured one of the relays is missing or a fuse is missing..
The Galant is a 02 Es 4cyl with factory sunroof and leather electric driver seat.
So here's what I need: I need someone with a 01-03 4cyl with hopefully the same factory options to post a pic of there fuse box under the hood and the fuse panel on the inside drivers door dash..
Me and my wife both have Gtz's and I'm sure some fuses and relays are in different locations..
Thanks in advance!

[greddy]

http://ww2.justanswer.com/uploads/toddwr007/2010-01-06_072249_Graphic9.gif

[B19WHEELS]

Thanks,now what about the one under the hood??

[greddy]

That is the one under the hood...

[B19WHEELS]

Lol,ok well what about the one on driverside dash area???

[B19WHEELS]

Anyone???

[polishmafia]

Do you have the owner's manual? All of that info should be in there.

[B19WHEELS]

So I guess no one with a 02 4cyl galant is willing to take 2 pics and post them for me??

[tamim13]

I think this would help you for the fuse box under the hood. It has pictures of my fuse box and what each relay is -

https://www.thegalantcenter.org/showthread.php?51323-Question-about-relay-positions

I replaced all my relays under the hood, with new ones. As far as I know nothing is wrong with any of them, so if you're missing any relays let me know, I can send you my old ones.

I'll try to get you a picture of the relays on the drivers side interior, tomorrow. Didn't see this thread earlier and it's just too dark now.

[Galanttuner10]

http://engine-codes.com/p0743_mitsubishi.html

code is not caused by a relay so I understand wanting to make sure the relays are correct but this code is due to solenoids, tranny fluid level or old broken down tranny fluid.

[wetamup2k3g]

^^Great link, it helped to explain why during the first few miles in the morning my RPM's are a little higher at the same vehicle speeds than later in the drive, torque converter lockup isn't happening yet because the fluid is still cold.