Grill Mesh Pics Finally!

[Titanium2K2]

As promised here's my finished work. Let me know what you think.

http://www.imagestation.com/picture/sraid65/pe333eaf78937f2e30b8655b236b318d6/fbf51c14.jpg
http://www.imagestation.com/picture/sraid65/p2f447fd9b0d431bf7e7a31067a73cfaf/fbf51c0a.jpg
http://www.imagestation.com/picture/sraid65/p8c24e6c11040f4d6d2ea16c842cfd0a1/fbf51c2d.jpg

[Prophet]

That doesn't look that bad. I like alot. 8)

[TITAN]

That doesn't look that bad. I like alot. 8)

what do you mean? it doesnt look bad at all! NICE!!!

[Prophet]

That doesn't look that bad. I like alot. 8)

what do you mean? it doesnt look bad at all! NICE!!!

I stand corrected. https://www.thegalantcenter.org/style_emoticons/default/laugh.gif

[paco]

Titanium2K2

Where did you buy the material??

[Tiptronic]

that looks great. job well done

[TITAN]

Titanium2K2

Where did you buy the material??

eh paco, wassappening?! he got it at THE HOME DEPOT, were you can go for all your car modification needs!.

looking at the top grill almost makes me wish i didnt do all that damn work on cutting out the slats...Almost :wink:

[TITAN]

that looks great. job well done

when are you going to do it?

[Titanium2K2]

Midnight's right. I got it at Home Depot, for all your home improvement/ custom automotive needs. https://www.thegalantcenter.org/style_emoticons/default/laugh.gif . The mesh that I got was called Premium Hinged Gutter Guards. They come in 6''x 3ft sheets for $1.25.
http://www.imagestation.com/picture/sraid60/p4b2138ec36101b844456795f230b6e1f/fc3ede13.jpg
Best $2.50 I've ever spent :thumbsup:

[TITAN]

Midnight's right. I got it at Home Depot, for all your home improvement/ custom automotive needs. https://www.thegalantcenter.org/style_emoticons/default/laugh.gif . The mesh that I got was called Premium Hinged Gutter Guards. They come in 6''x 3ft sheets for $1.25.
http://www.imagestation.com/picture/sraid60/p4b2138ec36101b844456795f230b6e1f/fc3ede13.jpg
Best $2.50 I've ever spent :thumbsup:
Whaaa!?!?

quien es "midnight"?

THE NAME IS...<span style='color:darkred'><span style='font-size:30pt;line-height:100%'>KNIGHTRIDERXXX</span></span>




:peace:

[PUNISHER]

KNIGHTRIDERRRRRRRRRR!!!!!!! LOL

that grill looks great, it made my mind up on what i am going to get, thanks man. how did you mount the grill?

[TITAN]

KNIGHTRIDERRRRRRRRRR!!!!!!! LOL

that grill looks great, it made my mind up on what i am going to get, thanks man. how did you mount the grill?

no one really did it the same.

hey check this out...

http://www.clubtgc.org/forum/viewtopic.php?t=12168 ('http://www.clubtgc.org/forum/viewtopic.php?t=12168')

we got into it all crazy!

[Titanium2K2]

Man my bad Knightrider. I was on the phone with my son's pediatrician telling her that he woke up with a fever around midnight. I didn't mean to disrespect you like that man.

[Titanium2K2]

KNIGHTRIDERRRRRRRRRR!!!!!!! LOL

that grill looks great, it made my mind up on what i am going to get, thanks man. how did you mount the grill?

I just cut individual pieces for each slats. I did it first with a piece of cardboard to get an exact fit and cut it out twice for the left and right side. Leave a little bit of room when cutting out the mesh so it will securely snug against the walls. I also put epoxy on the sides just in case. For the bumper I'm using zipties for now until I can find something better. So far it's holding up good. I got two zipties on the bottom and one on the top.

[TITAN]

Man my bad Knightrider. I was on the phone with my son's pediatrician telling her that he woke up with a fever around midnight. I didn't mean to disrespect you like that man.

its cool bro, just razzin' ya.

just dont let it happen again, or else.....:mg:

[Titanium2K2]

Man my bad Knightrider. I was on the phone with my son's pediatrician telling her that he woke up with a fever around midnight. I didn't mean to disrespect you like that man.

its cool bro, just razzin' ya.

just dont let it happen again, or else.....:mg:

Alright cool lol. Btw, you said you cut out the slats in the grill, what did you use to cut it with? (saw, dremel tool, etc) Also, did you run into any problems with box looking things inside the grill? Also, your bottom bumper looks good man.

[mrjaydeeone]

nice job

[Khopari]

yo man for some reason i cant do this shii, i already waste 3 grill ,,,

FUCK MESS GRILL :twisted:

[Ghost Beat]

looks preety good.

[TheRealDeal]

Nice Work Titanium. Looks Tight



As promised here's my finished work. Let me know what you think.

http://www.imagestation.com/picture/sraid60/p50639918d55b9a89242d505d9b011e1d/fc3ef662.jpg
http://www.imagestation.com/picture/sraid60/p25f86112e39047ff0cd354b140f323ed/fc3ef65d.jpg
http://www.imagestation.com/picture/sraid60/p7bc515c80405715508c964d23c5895b5/fc3ef66e.jpg
http://www.imagestation.com/picture/sraid60/ped40febb67a1c21859eb40b2eb9007a4/fc3ef667.jpg
http://www.imagestation.com/picture/sraid60/p165092203027592de8882d9284b6d7f0/fc3ef656.jpg

[Xavier22]

good work yo

[Gizmo]

I like your way better then my way.

http://www.imagestation.com/picture/sraid60/p4086b67d65a5557498758e03b0e8e281/fc3da233.jpg

Might have to try your way I likes.

[TITAN]

Alright cool lol. Btw, you said you cut out the slats in the grill, what did you use to cut it with? (saw, dremel tool, etc) Also, did you run into any problems with box looking things inside the grill? Also, your bottom bumper looks good man.

yep, i used the trusty dremel tool to cut out the slats. and those box things? like in gizmos-->maybe you are talking about the little part the connects it to the car that are kinda little squares? hopefullly. anyway, i just cut them away as much as possible so that you can see very little amount of those squares or boxes when you look directly at it. you cant make it all go away, because like i said, it helps to attach to the car. i was thinking for awhile that i could cut it off and the other 2 or 3 could just hold by themselves. but im gon' wait to see what it looks like with the little peice still there. cause i can always cut it away if i dont like it. right now im in the process of bondo-ing were the slats connected. very hard and time consuming shit. hopefully in about 2 wks i should finally get it done. thanks for the compliment on the mesh. i like yours, i think im gon' go back down to Home Depot to get some smaller sized mesh...maybe. i'll see what i can do to get pics of the work in progress. Peace.

[Titanium2K2]

I like your way better then my way.

http://www.imagestation.com/picture/sraid60/p4086b67d65a5557498758e03b0e8e281/fc3da233.jpg

Might have to try your way I likes.

Gizmo, your grill looks really good man. If I had a dremel tool or a saw I would've done mine the same way. It's cool that us 02 and up owners are finding different ways to customize the new grills. IMO, I don't think anybody's is better than anybody else's, it's just about being creative and original. That's what sets us apart since no two galants on this board are the same. Btw, Gizmo do you have any more pics of your grill?

[Gizmo]

Here you go, its kind of a work in process.
Click Click ('http://photos.yahoo.com/bc/gridegizmo/lst?.dir=/My+Photos/2K2+Grill+Insert&.src=ph&.view=t')

[nolc]

do you have a link to your mesh grille? thanks in advanced...


As promised here's my finished work. Let me know what you think.

http://www.imagestation.com/picture/sraid60/p50639918d55b9a89242d505d9b011e1d/fc3ef662.jpg
http://www.imagestation.com/picture/sraid60/p25f86112e39047ff0cd354b140f323ed/fc3ef65d.jpg
http://www.imagestation.com/picture/sraid60/p7bc515c80405715508c964d23c5895b5/fc3ef66e.jpg
http://www.imagestation.com/picture/sraid60/ped40febb67a1c21859eb40b2eb9007a4/fc3ef667.jpg
http://www.imagestation.com/picture/sraid60/p165092203027592de8882d9284b6d7f0/fc3ef656.jpg

[galantv600]

i cant see any pics!!!!!! the image is temporarily unavailable in all of them :cry: :cry: :cry: :cry:

[TITAN]

i cant see any pics!!!!!! the image is temporarily unavailable in all of them :cry: :cry: :cry: :cry:


imagestation is being a bitch.

[Titanium2K2]

sorry about that guys, I think imagestation is messed up or something because they think it's unappropriate to view MY OWN GRILL and erased my pics. Anyway, here's a few updated pics for you guys

http://www.imagestation.com/picture/sraid65/pe333eaf78937f2e30b8655b236b318d6/fbf51c14.jpg
http://www.imagestation.com/picture/sraid65/p2f447fd9b0d431bf7e7a31067a73cfaf/fbf51c0a.jpg
http://www.imagestation.com/picture/sraid65/p8c24e6c11040f4d6d2ea16c842cfd0a1/fbf51c2d.jpg

[Kalamidad]

Very nice Titanium, I like it.

[gost2002es]

Hey titanium, i wonder how it would look without the three bars going across.

[Titanium2K2]

<div class='quotetop'>QUOTE(gost2002es)</div><div class='quotemain'>Hey titanium, i wonder how it would look without the three bars going across.</div>

Here's a pic of Gizmo's ride from page 1
http://www.imagestation.com/picture/sraid60/p4086b67d65a5557498758e03b0e8e281/fc3da233.jpg
I like it

[mrjaydeeone]

looks good

[nolc]

Hey Titanium2K2...nice. Where did you get the mesh? And how did you install it?

[Titanium2K2]

I got it at Home Depot, for all your home improvement/ custom automotive needs. . The mesh that I got was called Premium Hinged Gutter Guards. They come in 6''x 3ft sheets for $1.25.
I just cut individual pieces for each slats. I did it first with a piece of cardboard to get an exact fit and cut it out twice for the left and right side. Leave a little bit of room when cutting out the mesh so it will securely snug against the walls. I also put epoxy on the sides just in case. For the bumper I'm using zipties for now until I can find something better. So far it's holding up good. I got two zipties on the bottom and one on the top.

[gost2002es]

so on the top those are three different mesh pieces for each side of the grill?

[Titanium2K2]

yeah, it's alittle time consuming but the results are worth it https://www.thegalantcenter.org/style_emoticons/default/biggrin.gif

[gost2002es]

how did you cut those teeth out at the corners?

[Faction]

<div class='quotetop'>QUOTE(Gizmo)</div><div class='quotemain'>I like your way better then my way.

http://www.imagestation.com/picture/sraid60/p4086b67d65a5557498758e03b0e8e281/fc3da233.jpg

Might have to try your way I likes.</div>


WTF. how do people get their cars so shiney

[nolc]

I bought and installed the mesh last night....let me know what you think.

post --> http://www.clubtgc.org/forum/viewtopic.php...p=162372#162372 ('http://www.clubtgc.org/forum/viewtopic.php?p=162372#162372')

[Niytrus]

lookin good https://www.thegalantcenter.org/style_emoticons/default/biggrin.gif

[nolc]

lookin good https://www.thegalantcenter.org/style_emoticons/default/biggrin.gif

thanks...I'm not sure if I wanted the mesh behind the grille or in front. In front was way easy to install and I don't like the cheap grey plastic grille with a black galant. I do like the mesh behind the grille on Titanium2K2's ride, but it doesn't look right with black ride in my opinion. BUT I'll probably try every possible way until I'm happy, since the mesh is like $1 sumfin a sheet.

I'll try to get some better pics of it later today, because the ones I took aren't that great...

[Titanium2K2]

That looks good man. keep up the good work.

[nolc]

That looks good man. keep up the good work.

appreciate it...next step is to figure out how to get this 4 cylinder to move a little quicker...should have gotten the GTZ! :oops:

[mighty]

someone up here asked how to get their cars that shiny.....wax and polish it....