Chrisblack build

[chrisblack]

Well im finall going to start my build thread,
Here what ive done to the car full tune, redid the interior black with 3 seats, voltage guage, wrap armrest,and rali art seat belt cover:), the exterior i did the smoke oem tail light , did the black roof, got yellow fog light tint, wrap my side skirts, for now a easy lip on my frony bumper, and a led bulb for my taillights....

My engine bay i did put in a 2g cold air intake from the junkyard, installed a voltage stabilizer( for show) paint valve cover red , white intake manifold ,strut bar, and cover some hose ss hose covers. I bought Megen short tube headers and full exhuast...

My future mods are jdm headlights, taillights, mugen Integra lip, 5speed swap( still getting parts) , hids, coilovers , turbo and tune...:)
Sent from my LG-MS695 using Tapatalk 2

[chrisblack]

http://img.tapatalk.com/d/14/09/01/sadava5u.jpg stock interior

Sent from my LG-MS695 using Tapatalk 2

[chrisblack]

http://img.tapatalk.com/d/14/09/01/umaburyd.jpg

http://img.tapatalk.com/d/14/09/01/u8y6ujy5.jpg

http://img.tapatalk.com/d/14/09/01/sy3uge3a.jpg

http://img.tapatalk.com/d/14/09/01/e7a2ega9.jpg

[Black8GV6]

nice start with the headers, catback, and intake. Does your intake have a bracket? if not it will snap the TB flange

[Ivory8g]

Good stuff man!

[GalantDreamer3455]

nice work. keep it up

[chrisblack]

Yea it does

[chrisblack]

Idk if the has been posted but the 01 accord rear visor fits the 8 but you have to cuts about a inch off each side ,so it doesn't over hang

http://img.tapatalk.com/d/14/09/03/ha8y5ajy.jpg

http://img.tapatalk.com/d/14/09/03/7avadesa.jpg

http://img.tapatalk.com/d/14/09/03/7asajy4u.jpg

[2002BlackDragon]

Really? That doesn't look too bad.

Sent from my Z796C using Tapatalk

[oakrdrs187]

Even with cutting the fitment is not good. You'll lose your side mounts. Theres a cheapo ebay visor. Why get the accord when one is made for it.

Sent From My Rooted Galaxy Note 2 using Tapatalk

[Silvertune]

It looks like shit, not a single aspect of it actually lines up. This isn't a build, it's a step by step guide to making your car go from looking like a homely sedan that at least serves its purpose well to a piece of shit sunk by the whims of an idiot teenage. You could start by using parts that actually have the potential to fit.

[chrisblack]

Lol o never really put it on my car i just said it looks like it fit

[chrisblack]

Its my friends for his accord, as u see im (holding it up)

[2002BlackDragon]

After looking at this thread on my PC this morning and actually being able to see the pics I have to agree. The figment is terrible.

Sent from my Z796C using Tapatalk

[chrisblack]

What tall think of these rims

http://img.tapatalk.com/d/14/09/09/a6e3abyz.jpg

http://img.tapatalk.com/d/14/09/09/yny2udav.jpg

http://img.tapatalk.com/d/14/09/09/y7ygaveq.jpg

[chrisblack]

http://img.tapatalk.com/d/14/09/09/yqenuju9.jpg
at meet with some friends

[chrisblack]

http://img.tapatalk.com/d/14/09/09/e3e5a5yb.jpg

After a month of waiting my rali art oil cover finally came in

[Black8GV6]

please get rid of the ralliart seatbelt cover on your strut tower bar, 1, it looks out of place, 2, it's not made to withstand the engine bay temperatures, it's a fire hazard.

[DEADEYES]

And the fake stainless steel hose covers while you're at it... throw them in the trash.

[chrisblack]

Ok

[chrisblack]

It will a trial and error project i guess, but thanks for the comments

[Galantman03]

Don't get mad at us, we just are picky about not having any "riced" galants out there if we can help it, and at the same time save you time and money by doing things right the first time :rockon:

[G-spot]

I have a DC Sport strut bar for sale that would look good in your engine bay :)

[oakrdrs187]

Do it up my friend, one thing... I had to disable the screen rotation function just to view the dang pictures on this page, ever rotate images?

Sent From My Rooted Galaxy Note 2 using Tapatalk

[chrisblack]

Nah i haven't

[2002BlackDragon]

G-Spot... check your PM's man!

Sent from my Z796C using Tapatalk

[2002BlackDragon]

My bad... don't think I actually sent it. Lol

Sent from my Z796C using Tapatalk

[chrisblack]

http://img.tapatalk.com/d/14/10/13/abetu9yb.jpg does anyone know wat lip this is molded from

[chrisblack]

Is it the integra mugen lip molded and stretched?

[oakrdrs187]

Itstopsecret
Classifiedstrictlyb.y.o.b













O.z.rally

Sent From My Rooted Galaxy Note 2 using Tapatalk

[demond0d5]

good to see another G popping up =D
Search up for the lip, there is a lot of info/posts on here about them ^.^ just be prepared for some bodywork iirc, not too terrible but basic skills.
and just to make sure, did you use a high temp paint for the valve cover? wanna make sure its not gonna burn and make toxic fumes and such...

P.S. take what you read with a grain of salt, some of these guys view stuff as their way or highway...but welcome!

[anglotrapxon]

Still got that strut bar G-Spot?

[chrisblack]

I'm having a small problem with this when I rev to about 2-3k rpm the engine sounds like it going to shut off and its only on cold starts

[demond0d5]

What engine/trans are you?


Sent from my iPhone using Tapatalk

[chrisblack]

4Cyl auto.... 190xxx miles

[demond0d5]

I don't know crap about those engines but there are some things on the 6g72 similar to this...I would search for a bit and try some of those solutions


Sent from my iPhone using Tapatalk

[chrisblack]

Does any body know how to hook up these horns.... ps just dipped my car in charcoal grey

http://tapatalk.imageshack.com/v2/14/12/19/ad2dc14e1da8ee32ef8442d929005fd1.jpg

http://tapatalk.imageshack.com/v2/14/12/19/e36ef2e7c7fbe81797563a3180eb9e9f.jpg

http://tapatalk.imageshack.com/v2/14/12/19/4f07297faf34df36583bea55a8200bfe.jpg

[demond0d5]

Exactly like the wiring diagram shows...you literally answered your own question...the wire you want can be found either at the oem horn or after the clock spring under the dash...


Sent from my iPhone using Tapatalk

[chrisblack]

Lol I found out how.. it was somewhat confusing I had to cut and extended. A few things

[Black8GV6]

Post a video of the horns working, I want to hear them.

[chrisblack]

I gotcha

[oakrdrs187]

You shouldn't have to use a relay, just disconnect the power from the stock horn and connect it to the new ones dont forget to ground them and they'll work.

Remember the stock horn is already run by a relay, no need to add another.

[chrisblack]

some pics from weakest 2k14 in maimi florida

http://tapatalk.imageshack.com/v2/14/12/20/160b3cb34e2c86e83b81dfa4f9f85a84.jpg

http://tapatalk.imageshack.com/v2/14/12/20/60b35c2585162594c3c624ba95a21845.jpg

http://tapatalk.imageshack.com/v2/14/12/20/94a113ce2332e72101da2a1cc66eb0fb.jpg

http://tapatalk.imageshack.com/v2/14/12/20/b67718f8251331a683639252fe9d7ea8.jpg

[Voodoo]

Cleaned up this thread a bit... chrisblack, if you're going to post a series of pictures, please make only one post. You should be able to post multiple pictures at once; no need to create a separate post for each picture. Thanks! :orangesmile:

[chrisblack]

Sorry man I didn't know.....

[chrisblack]

http://tapatalk.imageshack.com/v2/14/12/23/27a68fd9c3321942f4a3f490eb143618.jpg Can someone chime un on this I bought lowering spring 2in drop will these need a fender roll( I think It will just wanna double check, it's 18 inch rim http://tapatalk.imageshack.com/v2/14/12/23/f922973aa9abf2c783a689cd3e46217e.jpg it comes with all four rims and tires for 500$

[chrisblack]

Keep in mind the springs are not in yet there in the mail

[demond0d5]

Tire size? Probably gonna be fine either way but tire size is important...and rim offset


Sent from my iPhone using Tapatalk

[chrisblack]

I'll give it a check tommorow can't remember the tire size

[oakrdrs187]

Theres a slim chance you wont need a fender roll after the drop.

If you like the wheels dont let something so simple as a fender roll prevent you from getting them.

[chrisblack]

http://tapatalk.imageshack.com/v2/14/12/30/d2025775a54b3748c79151d4512bb7ff.jpg my springs came in [emoji2] now waiting on other parts to roll in the mail

[chrisblack]

http://tapatalk.imageshack.com/v2/15/01/03/44ce66001b5507d82dc87fa0646f1c4b.jpg when putting in the new struts and springs, do I only need to support to control arm....wanna make sure before I start

[Palmz]

plz post a video of ure car being towed :D other than that nice ride
dont know about the control arm

[chrisblack]

I might tear off my bumper lol...but alright thanks

[Black8GV6]

when putting in the new struts and springs, do I only need to support to control arm....wanna make sure before I start

this is what I did:

https://farm8.staticflickr.com/7515/16002716608_3d876e5707_z.jpg

[chrisblack]

Thanks man, this will help a lot

[chrisblack]

http://tapatalk.imageshack.com/v2/15/01/19/05b1d6284af299319cce480aaa44e9b7.jpghttp://tapatalk.imageshack.com/v2/15/01/19/a6cc096cefd6fc79cb1db825b22f2668.jpghttp://tapatalk.imageshack.com/v2/15/01/19/320ad7daf84ebcf37ece4e9cea5ace15.jpghttp://tapatalk.imageshack.com/v2/15/01/19/732d77b4937a548b403392e24347aca5.jpghttp://tapatalk.imageshack.com/v2/15/01/19/508d9e226c060fae61c3c765961ca326.jpg I finally got around to putting in the springs

[oakrdrs187]

Points for trying. Really though. The only image that tells me anything is the one with both springs side by side, had I not seen that I wouldn't know what happened.

You have an image of a fenderwell with no strut, should have took the picture after the strut with new spring was on. Then theres the picture of a steelie with a gap, don't know whether its before or after. And then you have 2 shots with uneven grass, creating an illusion, but I still don't know if the illusion is a lowered car or not. Like I said points for trying. But perhaps a full body side shot on even pavement would be good. Then get an old picture to show the before/after.


Idk maybe im on one because I didn't get my coffee this morning.

[Palmz]

^^ that

[chrisblack]

Ok

[chrisblack]

http://tapatalk.imageshack.com/v2/15/01/19/f8e569d9b18310169d755f759f47e6a7.jpghttp://tapatalk.imageshack.com/v2/15/01/19/559801cdf146fbd363635a0f0a38d526.jpghttp://tapatalk.imageshack.com/v2/15/01/19/71f97bd16f9a887fd432d6881c4cb272.jpg Is that better, all of these pics are after the springs were installed

[chrisblack]

I have to find a old picture lol

[oakrdrs187]

Again points for trying, and for doing somthing to your car, when a good chunk of us are at a stand still for one reason or another.



Out of curiosity, is there something wrong with the back half of the car, its seems to be avoided as if there was an imperfection of some sort. I say this because I once had a G with a huge cancer spot on the hood, I avoided front or exposing shots like malaria.

[chrisblack]

Lol nah I just didn't lower the back yet,but thanks man just doing as I can

[oakrdrs187]

Gotcha, don't ride around like that too long. Spring rates are different, dangerous.

[Black8GV6]

Congrats on getting the springs put it. Looks like you need to get your headlights buffed, they are cloudy.
I told you to support the axle, I can see your boot ripped and I'm pretty sure you took some life off that axle, I wonder what the passenger side looked like when you didn't support it.
http://tapatalk.imageshack.com/v2/15/01/19/a6cc096cefd6fc79cb1db825b22f2668.jpg

[chrisblack]

Thanks oakdrs187 Yea imma finish it this weekend and black8gv6 I told the mechanic to support the axle and he didn't that's y my install was 20for taking life off my axles.........ps shout out tearstone graphics for my decal http://tapatalk.imageshack.com/v2/15/01/21/81e0d5dd9c926717f504feb81485eaec.jpg

[oakrdrs187]

Either way, after lowering the car usually axles especially on V6 Gs start to go out.

[chrisblack]

I have a 4 cyl

[Black8GV6]

I told the mechanic to support the axle and he didn't that's y my install was 20for taking life off my axles[/IMG]

Honestly I would never go back to that "mechanic", the heavy knuckle is just hanging by your soft brake line, he could've caused a bigger issue there. Your "mechanic" has no common sense, I guess you get what you paid for tho, $20, you could've bought some walmart jackstands and done it yourself and then you have jackstands

[chrisblack]

True

[spdracr]

This is yours, isn't it?? So how is that v8 swap treating you??

http://images.tapatalk-cdn.com/15/05/06/b48898fbf92424fdd024a98b311996c9.jpg

[juicejax]

Lol uhhhh

[oakrdrs187]

Wow the CL pics are actually right side up.

But V8? 12K?



#notsureifserious

[G-spot]

Maybe I should sell mine on CL as a LS1 swap for $10k

[Black8GV6]

http://miami.craigslist.org/brw/cto/5005909919.html

[RustyShackleford]

Lol is this for real?

[demond0d5]

Very much a fake poser rice pile giving the galant community a bad name
http://images.tapatalk-cdn.com/15/05/07/a359d64cf4e9e6c43ef2d20b3f1c0f98.jpg


Sent from my iPhone using Tapatalk

[oakrdrs187]

Wheres the other 4 cylinders?

[Techn0Nut1996]

^Must be camera shy or something.

[coconut]

WTF!!!!!!! This must a be a JOKE!!!!

[RustyShackleford]

I'm confused. Obviously that is not a V8... is this supposed to be some sort of joke? Or is someone actually just very confused about their engine? I mean, it has to be a joke, RIGHT?!?

[oakrdrs187]

The dude was always confused IMO.

[demond0d5]

The dude was always confused IMO.

This^


Sent from my iPhone using Tapatalk