Evo8 turbo to a t3manifold

[boosting90]

Anyone ever done this? Any mods, solutions to make this work?

I hate the idea to use extra spacers for stock manifold to be away from starter.

I was thinking if anyone ran the thought of using a t3manifold.

Yes i have searched.

Thanks in advance.

[4g63lover]

http://www.ebay.com/itm/DSM-EVO-8-turbocharger-to-T3-exhaust-manifold-Flange-adapter-4g63-CNC-3-4-/141333233258?hash=item20e81dfe6a&vxp=mtr

[boosting90]

Awesome. I had look google and ebay, everywhere..... i guess i wasnt lookin for right name. Thanks bro

[kylecanthurdle]

why not just run a t3 turbo? lots of guys on here are doing so. im going to assume youve already picked up a 16g or something along those lines and dont wanna hack up a manifold?

[xd_01]

if your looking to clear the starter without any funky spacers on the manifold why don't you just go with a dsm manifold? the turbo placement is on the opposite side of the starter so no worries.

[boosting90]

why not just run a t3 turbo? lots of guys on here are doing so. im going to assume youve already picked up a 16g or something along those lines and dont wanna hack up a manifold?
Is not my personal car. Im building my cousin galant. He got a evo8 turbo kit. With a 10.5hotside. For his setup is the perfect turbo. I want him to use it. But he dont like the idea of spacers with stock manifold. I read some where u can use a evo starter and stock manny and will clear. But found no concrete evidence of anyone done so.

Sent from my SM-G386T using Tapatalk

[boosting90]

if your looking to clear the starter without any funky spacers on the manifold why don't you just go with a dsm manifold? the turbo placement is on the opposite side of the starter so no worries.
Dsm manifold will fit a twinscroll evo8/9 turbo? I thought it wouldnt fit.
???

Sent from my SM-G386T using Tapatalk

[OMEGA PHX]

xd thought you had a T3 turbo, A DSM T3 manifold plus that ebay adapter should work, you would still need to see if the o2 housing will clear the PS pump and its going to be tight, and get a downpipe fabricated. Note that if you use the t3 manifold obviously you wont benefit from the twinscroll spooling capabilities of that turbo.

[boosting90]

xd thought you had a T3 turbo, A DSM T3 manifold plus that ebay adapter should work, you would still need to see if the o2 housing will clear the PS pump and its going to be tight, and get a downpipe fabricated. Note that if you use the t3 manifold obviously you wont benefit from the twinscroll spooling capabilities of that turbo.

good point with the spool. fuck didnt think of tht.

thanks i guess i will post up and options once i reach tht point.

thanks everyone. i guess he has decision to make.