PDA

View Full Version : 2003 Front end/ grill



NickGen8
11-11-2015, 12:35 PM
Been looking at some way of changing the front of my 03 galant. I like the 01 style, any chance parts would swap? Been looking, haven't found any info.

I'd really be okay with changing it to just about anything else... the 03 front end just looks soft to me (noob here btw) :P

CHICAGO_ONE
11-11-2015, 12:50 PM
Yes, the 99-01 bumper will fit on. However, there is a bracket on your radiator support that will prevent the 99-01 grille to fit on. It will have to be cut off/removed if you want the grille.

NickGen8
11-11-2015, 01:16 PM
That won't mess up the radiator at all, will it?

gojirars
11-11-2015, 03:50 PM
No it will not mess with the radiator. Once the bumper is off you will see.

CHICAGO_ONE
11-11-2015, 04:30 PM
Correct. It won't effect anything. It's just there to hold the 'beak' part of the 02-03 bumper. If you're switching, then it's unnecessary. Same goes for JDM or aftermarket bumpers. You won't need that piece. Some people cut it (you'll need a good angle grinder/discs) or drill out the spot welds and pry it off (need good drill bits).

NickGen8
11-12-2015, 10:33 AM
While I'm at it, might as well go jdm if I can find one on the cheap...

juicejax
11-12-2015, 10:27 PM
The piece you need to cut can be removed with a hacksaw...no power tools necessary. Just a thin piece of metal that sticks out a little where the "nose" of the bumper cover is. I did the swap myself this summer

Sent from my SAMSUNG-SM-G900A using Tapatalk

NickGen8
11-13-2015, 09:33 AM
Thanks guys. Nice cars by the way, I got a lot of work to after seeing your guys' rides :)

RedGalant2k1
11-13-2015, 03:10 PM
Its best to drill out the spot welds that hold the nose on. But whatever works, if you use a hacksaw just make sure you clean up the are prior to mounting the grill (jdm or usdm).

carboncrx
04-01-2020, 05:09 PM
Noob here. I had the same question but now I'm wondering, if i bought the Vr-4 front end, would that snap on easy with my 02 US Galant

carboncrx
04-03-2020, 04:19 PM
Nevermind. Looks like any VR-4 front end the crash bar will have to be cut in some type of way?

bylanter
07-10-2020, 10:16 AM
Did you push through with replacing your front end grille?

carboncrx
07-10-2020, 07:22 PM
Not yet. But I think I’m going to just go with the 01 front. Seems a lot easier and cheaper at the moment lol

bylanter
01-04-2021, 08:44 AM
I agree.