Vaccum Gauge

[adriandennis17]

So i installed a Vaccum Gauge on my 7G, it's connected on the EGR my engine is a 4G93 SOHC Carburetor

https://lh5.googleusercontent.com/LdshDH-R6u6JdltFH8T0ftL468exrUqfDxMbAnLe_iZ6jA3i4-CaDagEr4utZjXFhw0OCw
On the manifold you can see the EGR Port next to the PVC Port.

https://lh3.googleusercontent.com/l4_0LA3uHw_ibpFtAwFtnETcAGYjE19UjdSn0JAO3kGOxrRAwv TBfAjegE0AKVC_NUcJMA
the EGR Valve with four screws.

https://lh5.googleusercontent.com/t_XYzpzIkk93wRWLBACtB-YQkFkV-E95JYSVU6EpBXG2rnAqgGU8cgZGgY8BoR5qTKFKtA
the hose was too long and at the end had a crimp..so i cut it a bit.

https://lh5.googleusercontent.com/VisxJIwn4FYbpEnuEwlKXGiV3IHVDU17iU1Hlnvneqdts0lalU 0wfpbZrVuBDMmf3kQ4jw
T-Fitting one end running to vaccum gauge the other EGR Port on Manifold to EGR Valve.

https://lh5.googleusercontent.com/eQE4-ID5HwTn1mLZv5kUtZlS8_nMyxPciHPzSWp5IGZ_EX6glZdai2e aUwVsaxl1P9vqgQ
The hose running to the Gauge i loomed to protect from heat etc.

https://lh5.googleusercontent.com/JW_QvW-dB2xjZW8tF-pn5VmQL2EiH6Lw7i40NFWrPbNcBKxzA0VpvzVIx8tx9Q4Osi54 cQ
Vaccum Gauge tested and works ok.