PDA

View Full Version : power window buttons sinking in


trougtyr
08-18-2016, 04:23 AM
My controls on my door are sinking in. Does anyone know how to fix this
content://media/external/file/47336

- - - Updated - - -

Damn guess idk how to post pictures lol. Basically it just looks like my buttons keep slowly falling further and further down to where i can barely push them
dac9050
08-18-2016, 11:03 AM
The buttons are held in place by clips/Screws. You need to remove the door panel and you can see if the clips maybe broke or the screws that attach to the plastic piece of the door trim.

Sent from my SM-N910T3 using Tapatalk
trougtyr
08-18-2016, 03:07 PM
Okay thanks
FooseGalant
08-20-2016, 11:53 AM
The plastic that holds the buttons in place is made of PVC plastic that gets very brittle over time (especially here in AZ). The part has so much material hogged out for weight saving that the pieces do not hold together. I took mine apart and reinforced all the joints with epoxy and plastic sheet.


The buttons are held in place by clips/Screws. You need to remove the door panel and you can see if the clips maybe broke or the screws that attach to the plastic piece of the door trim.

Sent from my SM-N910T3 using Tapatalk