PDA

View Full Version : Replacing front suspension



burkhardts
04-16-2017, 11:58 PM
Anyone know if there is any pre-assembled struts for 2000 galants? I've looked around quite a bit, i thought i found one but it turned out to be for an eclipse...surely they aren't interchangeable? I checked the Monroe site and KYB, but neither of them showed a complete strut for it.

Blue3000GTguy
04-17-2017, 10:45 AM
2000-2005 Eclipses use the same suspension.

Sent from my XT1585 using Tapatalk

seanske99
04-17-2017, 03:43 PM
Yeah, the Eclipse and Galant suspensions are the same. You are looking for struts with the springs already on them? Why not get a spring compressor and take off the originals, or get lowering springs?

FooseGalant
04-17-2017, 04:32 PM
4 cyl vs. V6?

Blue3000GTguy
04-17-2017, 04:35 PM
V6 springs are heavier duty but really it doesn't matter about the struts. If you have a V6 the 4 cylinder springs are a little drop for the front.

Sent from my XT1585 using Tapatalk

burkhardts
04-18-2017, 10:45 PM
@Blue3000GTguy
Thank you very much for that information :)

@seanske99
I have no experience with compressing springs and have heard its best not to in that case, also i don't want to use my old springs on the new struts either. By getting the struts with new springs already in place i can just get the work done as soon as the package gets here. As for lowering springs, i mainly use my vehicle to deliver pizza and lowering it would be very bad...lots of big holes in gravel driveways around here, or just uneven driveways where i almost scrape parts of my car as it is.

@FooseGalant
Mine is the 2.4L 4cyl

burkhardts
04-18-2017, 10:53 PM
Although the price difference is making it a more difficult decision. I can get all the parts to do both sides on the front for $190, while the already put together strut would be at least $140 for one side :(