Energy suspension Bushings

[Lazarus]

http://www.ptuning.com/html/Item-Desc.cfm?...delDesc=Eclipse ('http://www.ptuning.com/html/Item-Desc.cfm?PartNo=PT5%2D18110&MakeCode=mitsub&ModelCode=eclips&ModelYear=2000%2D2002%20All%20%28Incl%2E%20GT%29&ModelDesc=Eclipse')

Anyont got them? (CHIP) Need some input. I am probably gonna order them later this week.

[Auto-9]

I bought mine from Road Race Engineering. I had no idea if they did the job or not because I upgraded all of my suspension at about the same time, but RRE says they do make a difference. I did not get their motor mounts though, I got those from Deyeme Racing.

[Tiptronic]

does the master set come with the motor mounts :?:

is $150 the best we can get them

[00GTZ00]

ummmm I might have to look into getting these....

Im guessing you will need an alignment again....

[Lazarus]

nah they don't come with the motor mounts. they are another like 50 bucks. I got mine from (Chip)Fishboy55 I am gonna get teh bushings later this week. Ptuning has been good as far as buisness goes. trying to keep it all energy suspension.

[Tiptronic]

are the motor mounts and energy suspension a DIY project

[Lazarus]

I think they might be able to be done I am not sure I have them and I was told that they may have t be torched in there i haven't talkeed to the distributor of them yet

[Tiptronic]

keep us posted in any case. i've seen ppl talikng about these in the past, and if its something that should be gotten, i'd like to know. hell i got about 82k on the car, and i can start to hear a minor squeak that may be worn bushings

[Auto-9]

It can be if you have all the necessary tools...but me I left it to the pros.

[Lazarus]

ok may have to give me some time. I will have it done around the 1st I have to get my struts redone then I can do the bushings myself but the motormounts I am gonna have to take to get them done.

[Fishboy55]

are the motor mounts and energy suspension a DIY project

The energy suspension mounts are a DIY job only if you have a torch and a press. Their motor mounts are inserts, which means you need your existing housing to install them. So you have to torch out the stock ones, clean the housing then use a press to put the energy suspension ones in the mountings. And yes they do make a difference.

The Deyeme Racing ones are already in the mounts, so it's just a straight bolt up for the front one. The back one is a bitch in any case because of the bolt placement. However, replacing the front with the deyem racing one is about a 20 minute job.

Having used both, the Deyeme ones are better from an ease of install standpoint, but cost a little more. The energy suspension ones come with the cross brace bushings, which the Deyeme ones don't.

As far as the Energy Suspension chassis components, if they're as good as the motor mounts, I'd recommend them highly.

[Lazarus]

What's up Chip? are you back or are you still on vacation?

[Tiptronic]

thanks chip. i went to their website. should i be looking for the 2001-2003 stratus, or the 1995-2000 stratus

[Fishboy55]

What's up Chip? are you back or are you still on vacation?
I'm back CJ. Rested and refreshed https://www.thegalantcenter.org/style_emoticons/default/laugh.gif

Anthony, Match up the year of the stratus with the year of your Galant. That's what I did for the 2000 mounts at Dayeme.

[Tiptronic]

What's up Chip? are you back or are you still on vacation?
I'm back CJ. Rested and refreshed https://www.thegalantcenter.org/style_emoticons/default/laugh.gif

Anthony, Match up the year of the stratus with the year of your Galant. That's what I did for the 2000 mounts at Dayeme.

got it :!:

[Auto-9]

If you were to be really, really confused Travis will actually help you out by having "also fits same year Eclipse/Stratus/Galant!" in the item description.