Front tag holder

[Supernova]

If I were to take off the front tag holder, I know theres gotta be some screws in there thats gonna leave some screw holes in the bumper. How would I go about patching/covering those holes up once the tag holder is off?

[escoson]

i would think filling with bondo, sanding, periming then painting the area.

[esco_2003]

I dont know bondo maybe?

Anyway were are u going to put the plate them?
You know u need one in the front right u gonna get pulled over.
I was going to take the plate off then I decieded not too, because of that.

[esco_2003]

dayum escoson u beat me to the punch line I took to long typing this shit

[Supernova]

I dont know bondo maybe?

Anyway were are u going to put the plate them?
You know u need one in the front right u gonna get pulled over.
I was going to take the plate off then I decieded not too, because of that.

Alabama doesn't require to have 2 tags. Just the one in the back.

Hmmm... bondo huh? I'll have to check with my dad. I'm not good at this kinda stuff. :roll:

[Lazarus]

Best bets are probably gonna be Eurathane. Bondo may not hold as well as Eurathane because it drys hard. Eurathane on teh other hand will flex. Not saying your bumper is gonna do all that much moving but it seems like the better choice.

That or just get 2 push pins and shove em in there.

[Devins88]

If you have a front bracket, just screw your license plate/ label holder (https://munbyn.com/products/pink-roll-and-fan-fold-2-in-1-label-holder-for-printer) onto it. If you don't have one, you might consider using an adhesive-mounted bracket or a bracket made specifically for the shape of your model's bumper.