Need help with spoiler

[esco_2003]

I installed my spoiler wich I bought off ebay anyway I intalled my sell and there is a total of 5 holes drilled 4 for the screws and the other one for the wires anyway I tighted the 3 screws good but the 4th one seems to be stripped not the screw but that lil hole in which it goes the reason it stripped was because its is made out of plastic.

What do u guys think maybe use a wider and just tighted the shit out of it

[TheRealDeal]

Thats what I would do. If worse comes to worse you know.

[J]

you can use a wider screw for that stripped hole.

but don't forget that the galant trunk bends. it curves a bit. if you overtighten, you're gonna put divets into the trunk, and it will bend inward at the pedestals.

[akiraflux]

er...how hard is it to put the factory spoiler on?

[VegasMatt]

Just use a wider screw and put some WD40 on it before you screw it in.

[esco_2003]

It took me about and hour and half I just need someone to hold the bitch in place.... its not hard when I ordered it from ebay it came with all the instructions and hardware.. pretty easy

[esco_2003]

thanks guys Im going to try it this weekend