RIPPMODS
08-01-2003, 01:08 PM
OK, it’s a wrap… we are done with the proto typing….
We offer this to you as we did the 2G Stratus guys and the 3G Eclipse guys, please proceed and check out the links...
3G:
http://www.eclipseforums.org/forum/showthr...threadid=122737 ('http://www.eclipseforums.org/forum/showthread.php?s=&threadid=122737')
2G:
http://www.ucstech.com/forums/index.php?ac...=ST&f=4&t=10196 ('http://www.ucstech.com/forums/index.php?act=ST&f=4&t=10196')
See the comments being posted as argumnet, and please, keep in mind what your buying.....before posting price....
Here’s the deal:
Those of you following this long project, know what we are building, because you heard it from the horse mouth….
You called or E mailed us and we told you what we intended to build.....It’s done.....Now, we need to know HOW MANY are ready to commit to our production "PERFECT header SET UP"!
We propose:
Full length over sized header tubing
T304 Aircraft quality Stainless Steel
3”collector flanging
Dual High flow cats one for front bank and one for rear, with perfect O2 readings spots
“X” piping for exhaust balancing
3/8 flanges
O2 sensor wires
ALL hardware and gaskets included
RIPP Quality control and service (second to none)
Made in the USA by header genius
Instructions
$999.95 done deal! No group buy!
The price "may" move if a seriouse volume is had...Our manufacturer is turning his attention away from the race cars and onto us...a 19year business for him... so he plays no games!
But now, since these are the genuine article, we need $500 Upfront with a 2-3 week lead time… We‘ve got our header manufactures attention and he’s listening…(If you want something done right, you need to do it yourself) SO WE DID IT… these should not trip light like previous systems, NO RASP, no blown out gaskets, or non fitting units… These are RIPP quality controlled and designed units, NO OUTSIDE firms here…
PICS Of our 4CYL production units:
http://www.rippmods.com/products/products_...rs&productId=83 ('http://www.rippmods.com/products/products_list_details.asp?menuid=3&vehcName=Mitsubishi+Eclipse+I4+%2D+2000%2B&vehcCat=Engines&vehcDesc=Full%20Stainless%20Steel%20Race%20header% 20for%204G64%20Powered%20Cars&productId=83')
Production:
We can make 10 and have them on back order...... or we can make 20, and sell them off properly…and take orders as needed..... or make 30 and do it right the first time…. Is there a need? I think so, We’ve sold 120 V6 SDS (Supercharger Drive Systems to date), the fastest and most powerful GT’s are RIPP powered, but most importantly, the most reliable FI cars are on our engine program… So you know that this design is based on data logging and flaws found in current header systems…. We want no such problems with our systems, and too make more reliable power, with greater quality and attention to detail.
PICS will be available shortly, as well as more detail on power, but again these are not just simple air movers, like the shorty headers currently available, these are power makers, they are designed to be!
We will no estimate HP, we never have and we never will. Our product has always done the talking for us, and this is no exception….
So to reiterate, each piston gets it’s own pipe all the way down to the collector, they then merge and collect into a front high flow cat, with properly placed O2 sensors in and out, both sides of the engine have equal back pressure and heat scavenging. They are the real thing… no BS….
To assure you get a piece you must Call and leave your name and contact info, you will be contacted for a deposit when we are 80% done with production, which, like our SDS program will guarantee you a set… NO BS….We have an outstanding customer service reputation, we would not jeopardize it for anything... We earned our good standing with 3G and this will bring it over the top.
Sincerely
Ross Esposito
RIPP Modifications, Inc.
718-442-4723
www.rippmods.com
We welcome question but please don't ask:
1) How much HP they make (They have not been tested as of yet, but you know we make more WHP than we advertise)
2) How they sound, it's impossible to describe... they sound like a small block Chevy, because of the collectors...but with a Supra type "balls to the wall" whoosh, combined with the SC... Ecstasy!
3) What we HP expect to make (every car is different)
4) Sponsorship...(no room in price..yet)
5) Group Buy discount...(not yet at least), lets see the commitment first, I can approach him with it....But....
These headers are everything you have been promised before, but with the RIPP Modifications, Inc. pricing structure, they can easily be sold for $200-400 more ($1400). This as inexpensively as he will work…so lets be true to our word and make him see this order!
We offer this to you as we did the 2G Stratus guys and the 3G Eclipse guys, please proceed and check out the links...
3G:
http://www.eclipseforums.org/forum/showthr...threadid=122737 ('http://www.eclipseforums.org/forum/showthread.php?s=&threadid=122737')
2G:
http://www.ucstech.com/forums/index.php?ac...=ST&f=4&t=10196 ('http://www.ucstech.com/forums/index.php?act=ST&f=4&t=10196')
See the comments being posted as argumnet, and please, keep in mind what your buying.....before posting price....
Here’s the deal:
Those of you following this long project, know what we are building, because you heard it from the horse mouth….
You called or E mailed us and we told you what we intended to build.....It’s done.....Now, we need to know HOW MANY are ready to commit to our production "PERFECT header SET UP"!
We propose:
Full length over sized header tubing
T304 Aircraft quality Stainless Steel
3”collector flanging
Dual High flow cats one for front bank and one for rear, with perfect O2 readings spots
“X” piping for exhaust balancing
3/8 flanges
O2 sensor wires
ALL hardware and gaskets included
RIPP Quality control and service (second to none)
Made in the USA by header genius
Instructions
$999.95 done deal! No group buy!
The price "may" move if a seriouse volume is had...Our manufacturer is turning his attention away from the race cars and onto us...a 19year business for him... so he plays no games!
But now, since these are the genuine article, we need $500 Upfront with a 2-3 week lead time… We‘ve got our header manufactures attention and he’s listening…(If you want something done right, you need to do it yourself) SO WE DID IT… these should not trip light like previous systems, NO RASP, no blown out gaskets, or non fitting units… These are RIPP quality controlled and designed units, NO OUTSIDE firms here…
PICS Of our 4CYL production units:
http://www.rippmods.com/products/products_...rs&productId=83 ('http://www.rippmods.com/products/products_list_details.asp?menuid=3&vehcName=Mitsubishi+Eclipse+I4+%2D+2000%2B&vehcCat=Engines&vehcDesc=Full%20Stainless%20Steel%20Race%20header% 20for%204G64%20Powered%20Cars&productId=83')
Production:
We can make 10 and have them on back order...... or we can make 20, and sell them off properly…and take orders as needed..... or make 30 and do it right the first time…. Is there a need? I think so, We’ve sold 120 V6 SDS (Supercharger Drive Systems to date), the fastest and most powerful GT’s are RIPP powered, but most importantly, the most reliable FI cars are on our engine program… So you know that this design is based on data logging and flaws found in current header systems…. We want no such problems with our systems, and too make more reliable power, with greater quality and attention to detail.
PICS will be available shortly, as well as more detail on power, but again these are not just simple air movers, like the shorty headers currently available, these are power makers, they are designed to be!
We will no estimate HP, we never have and we never will. Our product has always done the talking for us, and this is no exception….
So to reiterate, each piston gets it’s own pipe all the way down to the collector, they then merge and collect into a front high flow cat, with properly placed O2 sensors in and out, both sides of the engine have equal back pressure and heat scavenging. They are the real thing… no BS….
To assure you get a piece you must Call and leave your name and contact info, you will be contacted for a deposit when we are 80% done with production, which, like our SDS program will guarantee you a set… NO BS….We have an outstanding customer service reputation, we would not jeopardize it for anything... We earned our good standing with 3G and this will bring it over the top.
Sincerely
Ross Esposito
RIPP Modifications, Inc.
718-442-4723
www.rippmods.com
We welcome question but please don't ask:
1) How much HP they make (They have not been tested as of yet, but you know we make more WHP than we advertise)
2) How they sound, it's impossible to describe... they sound like a small block Chevy, because of the collectors...but with a Supra type "balls to the wall" whoosh, combined with the SC... Ecstasy!
3) What we HP expect to make (every car is different)
4) Sponsorship...(no room in price..yet)
5) Group Buy discount...(not yet at least), lets see the commitment first, I can approach him with it....But....
These headers are everything you have been promised before, but with the RIPP Modifications, Inc. pricing structure, they can easily be sold for $200-400 more ($1400). This as inexpensively as he will work…so lets be true to our word and make him see this order!