PDA

View Full Version : I NEED HELP Bout SDS install 4cyl



Phase24
08-09-2003, 02:43 PM
my sc is getting installed now and the last thing to do is the wiring for the Black Box

The instructions do not have the cars diagram for wirng it in.

Can someone help me out and tell me where ill be able to find it on the internet somewhere or if anyone had this same problem

thanks

cdaw2001ES
08-09-2003, 03:05 PM
what wires does it need?

Kwiksix
08-09-2003, 05:33 PM
call ripp they'll gladly help you out.

mjc1055
08-09-2003, 05:55 PM
yeah i dont have the SDS but ive heard that they have great customer service

VegasMatt
08-09-2003, 11:04 PM
I am shocked that the black box didnt come with instructions. Mine did for the V6, but I didnt end up using it.

You better call Ripp, because it is HIGHLY important you hook that up correctly the first time. Check and recheck that youve tapped into the correct wires.


I think what he is looking for is the wiring diagram for an I4 ECU.

Phase24
08-10-2003, 10:00 AM
Ripp said they couldnt help me until monday
and yea i am looking for the diagram for the I4.

My mechanic cant find one anywhere.
I keep searchin the net but i cant find shit

cdaw2001ES
08-10-2003, 10:36 AM
The diagram is really a spread sheet - and it would be difficult to put the whole thing on here, If you could please let me know which you need, I will let you know where, and what color, and pin#, etc... Quickly

Phase24
08-10-2003, 11:10 AM
I'm not personally workin on the car its down the street at the mechanics shop
This is what he is telling me i need so if i found summtin i would print it out and bring it to him.

cdaw2001ES
08-10-2003, 11:47 AM
Ok - I'll make one up - but just for the usual stuff that - Might _ be needed for a good piggyback, some of these things you wont need, but others you will


This is for the 8G I4

This is the PCM Interface
The pin number is indicated
You get to the wires directly below the pcm (which is behind and slight lower than) the glove box

http://64.91.37.32/pcm.gif


Pin
1 :arrow: Injector 1 :idea: Yellow - Blue
9 :arrow: Injector 2 :idea: Yellow -Red
24 :arrow: Injector 3 :idea: Yellow - Black
2 :arrow: Injector 4 :idea: Green -Black

78 :arrow: Throttle Position Sensor :idea: Brown - White
65 :arrow: MAS/ Volume air flow Signal :idea: White - Green

11 :arrow: Ignition Coil 1 & 4 :idea: Black - Blue
12 :arrow: Ignition Coil 2 & 3 :idea: White - Green

71 :arrow: Front O2 Sensor Signal :idea: White
73 :arrow: Rear 02 Sensor Signal :idea: Green

80 Speed Sensor
64 Intake Air Temp Sensor
91 Manifold Differential pressure Sensor
55 Barometric Pressure Sensor
44 Coolant Temperature Sensor


Power is on :arrow: 41 and 47 "on" :firedevil: :idea: RED

Have fun :TGC:

Phase24
08-10-2003, 07:58 PM
thankx alot hopefully this is what he needs