Anyone with "REAL" dyno number post in here....

[00GTZ00]

I was thinking, because of all the dyno talk in a few threads and some people were wanting to see dyno numbers of our cars, I thought it would be a good idea for everyone that has a dyno sheet to post it here and state what your mods are. Then maybe we could get this stickied to the top of the section so peole will stop asking "were is your dyno?" or "How much hp does my car make?"

Basicly this is to help eveyone see what our cars can produce stock, or modded.......


here is mine.....

2000 Galant GTZ
All stock (even had a dirty air filter)

PS. Make sure they are the corrected #'s too https://www.thegalantcenter.org/style_emoticons/default/biggrin.gif

http://www.nacher.net/temp/mydyno.jpg

[Auto-9]

Doh...anyone know where I can get mine scanned so I can post it?

[ASTIG]

dont have a scanner, but here's my results. Mods at the time were, AEM cai, magnaflow street series mufller.

ambient temp: 78 deg
correction factor: 1.02

Max HP: 164.2 @ 5600 rpm
Max tq: 164.7 @ 4200 rpm

btw. 1/4 mile time: 15.9 @ 88 mph. I lost my timeslips so I'm just going by memory. same mods as above.

[00GTZ00]

Kinkos can scan the dyno papers for you....I think https://www.thegalantcenter.org/style_emoticons/default/biggrin.gif

[burthold]

my sheet bone stock GTZ temp was 69 degrees and 50+% humidity this was the best pull out of 3

http://wesworld.net/car/web/dyno.gif

Wes

[Auto-9]

<div class='quotetop'>QUOTE(00GTZ00)</div><div class='quotemain'>Kinkos can scan the dyno papers for you....I think Â*:D</div>

Ah ha! I shall have it done tomorrow...too busy running errands right now https://www.thegalantcenter.org/style_emoticons/default/sad.gif It'll be worth it I think...my dyno sheet not only has my best results but it's compared against yours as well, be good for the board I thinks.

[96TEXASgalant]

Anybody in the D.C. area know where a Dyno facility is?

[Kingman]

extreme motorsports in Jessup I think

EIP tuning in westminster.

[Auto-9]

Well I found the scanner that came with my computer from 3 years ago...didn't even realize I had one https://www.thegalantcenter.org/style_emoticons/default/laugh.gif but anyhows...here is my dyno sheet. My result is the blue line, the other two runs are 00GTZ00's runs being compared with mine. My runs were obviously before I had the slip-fit joint welded shut, done in 94 degree weather at 87% humidity: http://www.geocities.com/Area51/Zone/4804/dyno.jpg ('http://www.geocities.com/Area51/Zone/4804/dyno.jpg') I don't know how to link pics https://www.thegalantcenter.org/style_emoticons/default/smile.gif Hold Ctrl while you click the link to open it in a new page...Geocities doesn't like me using them to host pics for other sites apparently https://www.thegalantcenter.org/style_emoticons/default/biggrin.gif

[cdaw2001ES]

You need to create an index.htm page with you pic on it. The host you choose sucks ass.

[Auto-9]

https://www.thegalantcenter.org/style_emoticons/default/smile.gif Tell me about it https://www.thegalantcenter.org/style_emoticons/default/smile.gif

[newsobe]

how much does it cost to dyno your car ? and anybody know where i can do it in north cali ?

[TJC]

For Rallifan's link, put a space after the URL in the new window and enter and it will work.
http://www.geocities.com/Area51/Zone/4804/dyno.jpg ('http://www.geocities.com/Area51/Zone/4804/dyno.jpg')

Interesting and all are Fed. spec GTZ's. :wink:

[Auto-9]

Not mine, mine is a Cali ES V6, 00GTZ00 can confirm for you https://www.thegalantcenter.org/style_emoticons/default/smile.gif As for the price it takes about 60 to 70 bucks for me each run.