Gojirars 99' 8G Build

Printable View

Show 40 post(s) from this thread on one page

12-12-2013, 05:17 PM
gojirars

Gojirars 99' 8G Build

I bought this car for about $1400 at 156,000 miles after my first was totaled. The car mechanically was in poor condition but the body was virtually rust free and clean. I cleaned it up and maintained it until I stumbled onto this forum. Since then I have doing some small mods to it and decided it was time for a build thread. There will be a lot of pics so it will take a bit.

Engine:
Stock 4G64
NGK Iridium Spark Plugs
AEM Oil Cap
Injen SRI
Prothane Motor Mounts
6G72 TB

Transmission:
Auto (for now)

Suspension:
Tein SS Eclipse Coilovers
3G Eclipse GT OEM Strut Bar

Wheels:
Set 1-10th Anniversary Eclipse OZ F1 Rally Wheels Wrapped in Eagle RSA
Set 2-1980's Riken STX 16x7.5 wrapped in Dunlop Dirreza 205/50/16

Interior:
3G Eclipse Black Cloth Seats Front
Rear Seats Dyed Black, 3G Eclipse Cloth Inserted to Match
3G Eclipse F/R Seat Black Belts
3G Eclipse Steering Wheel
Black Headliner
Black Trim
Door Panel Inserts Black Leather
3G E-brake Cover
3G Black Door Handle Trim
8G JDM Chrome Handles
OEM Woodgrain All Around
3G Black Sun Visors
9G Weather Stripping Black
300mm Mirror
One Totoro

Audio:
Kenwood KDC-352U
Pioneer 3-Way 6x9s Rear

Exterior:
8G JDM Aspire Tail Lights
1970's JDM Yellow Glass Foglights (Not Tinted Film)
USDM To JDM Look Grille Mod
Rear Debadged
8G B OEM Headlights
1997 Accord Mirrors (Heated and Power)
8G B Silver Keyless Trunk Garnish
Ebay Door Visors

I am sure I missed a few things but that's the most of it. Now onto the pics.

After buying number two.

http://imagizer.imageshack.us/v2/800x600q90/34/7swv.jpg

Swapped the wheels over and did the grille mod

http://imagizer.imageshack.us/v2/800...0/811/0ppt.jpg

Swapped to 8G B Headlights

http://imagizer.imageshack.us/v2/800x600q90/96/j4as.jpg

Accord mirror install after looking at alternatives and finding G-Spots Thread Here

http://imageshack.com/a/img39/1173/photo8xx.jpg
http://imageshack.com/a/img687/8055/photo7o.jpg
http://imagizer.imageshack.us/v2/800x600q90/35/erw1.jpg

I met with M-Rod and Silvertune and ended up installing the 6g72 TB and a bit later installed remote start and alarm

http://imagizer.imageshack.us/v2/800x600q90/29/y9k9.jpg

LED dome light installed afterwards

http://imagizer.imageshack.us/v2/800x600q90/35/v3ez.jpg
http://imagizer.imageshack.us/v2/800x600q90/51/jiql.jpg
http://imagizer.imageshack.us/v2/800...0/823/pb3f.jpg
http://imagizer.imageshack.us/v2/800x600q90/41/zr44.jpg
http://imagizer.imageshack.us/v2/800...0/607/i535.jpg

After installing the LEDs a month later my Aspire Tails arrived

http://imageshack.com/a/img854/6166/20121106093532.jpg
http://imageshack.com/a/img90/3770/20121106102134.jpg
http://imageshack.com/a/img268/646/20121106114626.jpg

As winter started rolling in most modifications halted. I did pick up a JDM Grille from Doctor however.

http://imagizer.imageshack.us/v2/800...0/194/trjh.jpg
http://imagizer.imageshack.us/v2/800...0/545/w83a.jpg

Once spring came around I got a few more things. AEM oil cap and fitted my old/new wheels on. That wheel gap though....

http://imagizer.imageshack.us/v2/800...0/571/z73j.jpg
http://imagizer.imageshack.us/v2/800...0/841/4rn7.jpg

And once again progress slowed. However I did have plans much larger than I was planning and saved. My chance came and I nailed a set of Tein SS coilovers for $500 in August

http://imagizer.imageshack.us/v2/800x600q90/20/ba51.jpg
http://imagizer.imageshack.us/v2/800...0/853/jnqt.jpg
http://imagizer.imageshack.us/v2/800...0/138/u1tk.jpg
http://imagizer.imageshack.us/v2/800x600q90/69/oauw.jpg
http://imagizer.imageshack.us/v2/800...0/809/mypd.jpg

The stock springs shot out on the first set and scared the shit out of me. Second one fared better.

http://imagizer.imageshack.us/v2/800...0/547/edyc.jpg
http://imagizer.imageshack.us/v2/800...0/824/fjcr.jpg
http://imagizer.imageshack.us/v2/800x600q90/40/4rbq.jpg
http://imagizer.imageshack.us/v2/800x600q90/18/oxz4.jpg
http://imagizer.imageshack.us/v2/800x600q90/24/49o4.jpg

Before VS After

Before
https://fbcdn-sphotos-f-a.akamaihd.n...96798844_n.jpg
After
http://imagizer.imageshack.us/v2/102...0/191/2fc5.jpg

After the install a few weeks later I picked up some 3G seats from M-Rod. Didn't take pics of them but after Factory MOD 2013 I started to tackle the interior. Lots of 3G interior parts and much thanks to Silvertune. Also received my JDM chrome handles in the mail as well as ordering/receiving upholstery material.

http://imagizer.imageshack.us/v2/800x600q90/28/4wpc.jpg
http://imagizer.imageshack.us/v2/800...0/853/532d.jpg
http://imagizer.imageshack.us/v2/800x600q90/13/3p9v.jpg
http://imagizer.imageshack.us/v2/800...0/542/feui.jpg
http://imagizer.imageshack.us/v2/800...0/826/7sbm.jpg
http://imagizer.imageshack.us/v2/800...0/703/afnb.jpg
http://imagizer.imageshack.us/v2/800...0/850/oh0k.jpg
http://imagizer.imageshack.us/v2/800...0/194/6rk3.jpg
http://imagizer.imageshack.us/v2/800x600q90/13/zuwc.jpg

There won't be any full interior shots for a bit as it's rather messy with all the parts I am gathering haha. In between receiving and installing my good friend SpecialK bought a nice 8G DE and I hooked him up nice and proper with a 6G72 TB.

http://imagizer.imageshack.us/v2/800...0/571/yx6d.jpg
http://imagizer.imageshack.us/v2/800x600q90/36/zbjx.jpg

Since then I have been pretty good for the year and I cannot wait for 2014. A lot of things will be happening and by MOD it shall be a very different car. Any questions let me know and thanks for reading. How about a sneak peek at next year?

http://imagizer.imageshack.us/v2/800x600q90/22/aku8.jpg
12-12-2013, 06:32 PM
Black8GV6

Nice, I didn't know you had that much done
12-12-2013, 07:50 PM
4g63lover

Your build reminds me of BabyG's early stages.

http://i10.photobucket.com/albums/a1...g/_MG_9632.jpg

The 16's is so nostalgic for me. Next time you need tires. 225/50/16 looks awesome on the 8G.

I am looking forward to following this build. I hope to see you at MOD next year. Hopefully BabyG is done by then.
12-12-2013, 08:00 PM
M-Rod

I wanna know what's in that bubble wrap!
12-13-2013, 08:29 AM
Silvertune

I'm going to have to convince you to do some prothane stuff. FLCA bushings and sway bar bushings/endlinks front and back at the very least. Stiff springs only get you so far when the alignment wonders all over as a result.

Among other things... It should be a fun year.
12-13-2013, 02:24 PM
Galantman03

dang i need to swing out to minn next summer....
12-13-2013, 05:35 PM
wetamup2k3g

MN guys do it big! Loving the progress, in to see what's inside the bubble wrap!
12-13-2013, 11:02 PM
kylecanthurdle

Kcco!
12-17-2013, 10:56 PM
gojirars

Quote:

Originally Posted by Black8GV6

Nice, I didn't know you had that much done

I still feel like I haven't done a ton haha, once interior is finished it's on to engine work.

Quote:

Originally Posted by 4g63lover

Your build reminds me of BabyG's early stages.

http://i10.photobucket.com/albums/a1...g/_MG_9632.jpg

The 16's is so nostalgic for me. Next time you need tires. 225/50/16 looks awesome on the 8G.

I am looking forward to following this build. I hope to see you at MOD next year. Hopefully BabyG is done by then.

I love the 16's and the tire size i'll keep in mind. The ones I have now need to be replaced. I've read your whole build thread and it has given me a few ideas. Also hoping to see you and BabyG at MOD!

Quote:

Originally Posted by M-Rod

I wanna know what's in that bubble wrap!

Matt you'll be the first to know! I'm gonna need help!

Quote:

Originally Posted by Silvertune

I'm going to have to convince you to do some prothane stuff. FLCA bushings and sway bar bushings/endlinks front and back at the very least. Stiff springs only get you so far when the alignment wonders all over as a result.

Among other things... It should be a fun year.

It shall be a fun year, going to for sure do as you mention seeing as I will definitely need an alignment and some newer suspension components all around. Also may need a hand with it.

Quote:

Originally Posted by Galantman03

dang i need to swing out to minn next summer....

Gotta have a mini meet or something. Boost for Boobies?

Quote:

Originally Posted by wetamup2k3g

MN guys do it big! Loving the progress, in to see what's inside the bubble wrap!

Thanks! MN's where its at! More to come next week!

Quote:

Originally Posted by kylecanthurdle

Kcco!

Really good tasting, we don't have this in MN so I bought a case at Binny's in Chicago.
12-21-2013, 01:42 PM
8thLS6

Always liked those wheels on your car, nice choice in mods too
12-23-2013, 02:00 AM
doctor

Great job!:) Good luck with new mods:023:
12-23-2013, 02:56 AM
Samman

Well done. Keep it going
01-12-2014, 08:46 PM
gojirars

Quote:

Originally Posted by 8thLS6

Always liked those wheels on your car, nice choice in mods too

Thanks man!

Quote:

Originally Posted by doctor

Great job!:) Good luck with new mods:023:

Thanks! Just wait until spring!

Quote:

Originally Posted by Samman

Well done. Keep it going

Thank you!

In terms of updates not a whole lot going on due to the cold (-50's windchill for MN) but I did get a few more small bits in the mail to add to a growing pile of parts. I am going to be moving out of my parents house and into a house of my own come next Saturday and am rather excited to actually have a place to work on the car. Doors and interior mostly finished, carpet ordered and trying to locate a diamante for parts....
01-12-2014, 10:38 PM
Black8GV6

What diamante parts do you need? The rear interior dome lights?
01-12-2014, 11:40 PM
gojirars

Quote:

Originally Posted by Black8GV6

What diamante parts do you need? The rear interior dome lights?

Well I have those....what I need is the full black dash+speedo/center console as well as misc....cleazy has a headstart on me with it but basically the same idea. Most of them have been tan in my local area so it's just a waiting game. The stock dash is okay and yeah I can paint it black but I need something a bit more refreshing for the interior...so there's a big hint on what's to come. Keeping hush hush on the rest of my plans haha.
01-13-2014, 05:53 PM
wetamup2k3g

The VR-X Diamante is hard to come by, but with some patience one should pop up. That 6G74 has a couple more horses than the ES/LS 6G74 IIRC. Something to keep in mind...

Edit: NVM, you have the 4G64. LOL on my part.
01-13-2014, 11:01 PM
gojirars

Quote:

Originally Posted by wetamup2k3g

The VR-X Diamante is hard to come by, but with some patience one should pop up. That 6G74 has a couple more horses than the ES/LS 6G74 IIRC. Something to keep in mind...

Edit: NVM, you have the 4G64. LOL on my part.

wetamup2k3g, thanks for the info and heads up. And yeah if I had a v6 I'd most likely go that route and it would make the idea of purchasing a whole parts car more justifiable but since i am not it'll be more difficult. However the 4g64 shall see a few things coming together near the end of next month.
01-14-2014, 01:47 AM
doctor

Quote:

Originally Posted by gojirars

I need is the full black dash+speedo/center console

What about EUDM black interior? It will be One of a kind EUDM Galant is US:)
http://i.drom.ru/foto/album_photos/1/329/2043.jpg http://autoportal.ua/img/inf/zvezdyb..._galant_42.jpg
and high contrast (optitron) speedo
https://f-a.d-cd.net/6809038s-960.jpg
01-14-2014, 02:09 AM
gojirars

Quote:

Originally Posted by doctor

What about EUDM black interior? It will be One of a kind EUDM Galant is US:)

Pm'd ;)
01-14-2014, 04:17 AM
dimushor

none of them would fit the USDM galant. the front sits would be bolt on and the speedo does not fit... i have all of this at home and i cannot use it.

Show 40 post(s) from this thread on one page