8g galant no spark on cylinder 2 and 3 after manual harness swap
So i have a 01 galant with a 2.4 engine. I did the manual swap and use the engine harness from a 00 eclipse with a 03 eclipse ecu/cam reluctor. I also did the outlander intake manifold swap all together. The car starts and run, but doesn't have spark on cylinder 2 and 3.
Things i've checked..
*Took off harness and check all wires for damage
*Check timing
*Switch the coilpack and still same cylinders no spark
*Check cam sensor for cracks
*Open ecu and no burns on circuit board
*Check all grounds
Let me know if there's other things i'm missing. Thanks in advance.