8G Auto to Manual Conversion DONE! **UPDATED 02/03/06**
Well it’s my time, after long considerations of whether to do the swap or not I have decided to convert to a 5 speed transmission. I will update this thread and make a detailed tutorial as I move along. So let’s begin…
Part 1: The Arrival
After waiting for a week for the junkyard to send this out I finally got it today. In the box came stock flywheel, clutch, master/slave clutch cylinders, clutch/break pedals, 2 shifter assemblies and a lot of bolts.
http://www.vertsoft.com/roman/8g5spd...L001_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...L002_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...L003_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...L004_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...L005_SMALL.jpg
I'm going to try to install the pedals and the master/slave cylinders this Friday if the weather permits it, as for the actual conversion will take place on Janury 7th.
Part 2: Pedals & Master/Slave Clutch Cylinders
Everythis is still on schedule and I have finished installing clutch and break pedals.
http://www.vertsoft.com/roman/8g5spd...S001_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...S002_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...S003_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...S004_SMALL.jpg
Things would have moved a lot quicker except that I had to relocate my 4AWG cable for the system. Dam install guy picked a great spot to run it.
http://www.vertsoft.com/roman/8g5spd...S005_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...S006_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...S007_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...S008_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...S009_SMALL.jpg
We had to dremel out the master cylinder plate and everything fit like a glove.
http://www.vertsoft.com/roman/8g5spd...S010_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...S011_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...S012_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...S013_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...S014_SMALL.jpg
Part 2.5: Optional/Required parts obtained for the install
===============REQUIRED PARTS=====================
3G TRANSMISSION: $764 - JUNK
ACT 2100 CLUTCH KIT: $350 (MB1-HDSS) - NOLIMITMOTORSPORT.COM - GET IT
3G CLUTCH RELEASE CYLINDER: $65 - DEALER
PENNZOIL SYNCHROMESH 3 QUARTS: $30 - AUTOZONE
===============OPTIONAL==========================
PARTS ARE FROM A 1997 ECLIPSE GS-T FWD 2.0 TURBO
2G ACT XACT STREETLITE FLYWHEEL: $250 (600165) - NOLIMITMOTORSPORT.COM
2G STARTER: $95 - AUTOZONE
(2) 1/8" WASHERS WITH THE DIAMETER OF THE STARTER BOLT
FLYWHEEL BOLTS: $30 (MD302074) - DEALER
(1)SS CLUTCH LINE $10 (EAR-63010112ERL) - SUMMITRACING.COM
(2)SS CLUTCH LINE ADAPTER $5 (EAR-989545ERL) - SUMMITRACING.COM
===============EXTREMELY OPTIONAL==================
HAWK FRONT BREAKPADS: $57 - NOLIMITMOTORSPORT.COM
F+R BREAK LINES: $90 - R1CONCEPTS.COM
F+R ROTORS: $160 - R1CONCEPTS.COM
SHIFTER BASE BUSHINGS: $24 - EBAY - GET IT
SHIFTER CABLES BUSHINGS: $28 - EBAY - GET IT
=================================================
LABOR, OILCHANGE, COFFEE $360
===============GRAND TOTAL FOR THE SWAP=======$2303
http://www.vertsoft.com/roman/8g5spd...ARTS_SMALL.jpg
GOLDEN RULE OF THE JOB IS: GET ALL THE PARTS BEFORE YOU START
Part 3: The Job
http://www.vertsoft.com/roman/8g5spd...E001_SMALL.jpg
TAKE APART YOUR CENTER CONSOLE, WHICH IS 7 SCREWS TOTAL (2 BEHIND THE ASH TRAY CONSOLE)
http://www.vertsoft.com/roman/8g5spd...E002_SMALL.jpg
UNCLIP THE KEY LOCK CABLE, PUSH THE INNER ROD IN AS MUCH AS NEEDED, BEND THE REMAINDER AND ELECTRIC TAPE IT.
http://www.vertsoft.com/roman/8g5spd...P003_SMALL.jpg
REMOVE THE AIR INTAKE, REMOVE THE BATTERY
http://www.vertsoft.com/roman/8g5spd...P004_SMALL.jpg
REMOVE THE BATTERY TRAY
http://www.vertsoft.com/roman/8g5spd...P005_SMALL.jpg
UNPLUG ALL THE HARNESSES/GROUND CABLE, REMOVE SHIFTER CABLE, DISCONNECT TRANNY COLLER LINES
http://www.vertsoft.com/roman/8g5spd...P009_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P010_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P011_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P012_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P013_SMALL.jpg
DRAIN OLD TRANNY OIL
http://www.vertsoft.com/roman/8g5spd...P014_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P016_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P019_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P023_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P027_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P028_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P029_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P032_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P033_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P034_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P035_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P037_SMALL.jpg
REMOVE THE OLD FLEX PLATE
http://www.vertsoft.com/roman/8g5spd...P038_SMALL.jpg
REMOVE THE STARTER PLATE TO TAKE OUT THE STARTER
http://www.vertsoft.com/roman/8g5spd...P039_SMALL.jpg
REMOVE THE STARTER
http://www.vertsoft.com/roman/8g5spd...P040_SMALL.jpg
IF USING A 2G FLYWHEEL REMOVE THE PILOT BEARING
http://www.vertsoft.com/roman/8g5spd...P043_SMALL.jpg
PUT THE STARTER PLATE BACK AND ATTACH THE FLYWHEEL (USE THREADLOCK FOR THE BOLTS) IF USIN A 2G FLYWHEEL THEN THROUGH OUT THE 2 FLYWHEEL WASHERS
http://www.vertsoft.com/roman/8g5spd...P045_SMALL.jpg
ATTACH THE FLYWHEEL WITH THE PRESURE PLATE
http://www.vertsoft.com/roman/8g5spd...P046_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P071_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P048_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P049_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P050_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P051_SMALL.jpg
REMOVE THE SPEEDSENSOR CONVERSION HARNESS
http://www.vertsoft.com/roman/8g5spd...P060_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P055_SMALL.jpg
REMOVE THE BOLT THAT ON THE RIGHT, CUT THEN DRILL THE BOLT THATS ON THE LEFT
http://www.vertsoft.com/roman/8g5spd...P056_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P062_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P064_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P069_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P072_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P073_SMALL.jpg
INSTALL THE TRANSMISSION AND WATCH IT FIT
http://www.vertsoft.com/roman/8g5spd...P074_SMALL.jpg
IF USING A 2G FLYWHEEL THEN INSTALL THE NEW STARTER SPACED OFF BY A 1/8" WASHER PER BOLT
http://www.vertsoft.com/roman/8g5spd...P076_SMALL.jpg
IF YOUR OIL COVER IS DAMAGED DURING SHIPPING GET A NEW COVER/LIQUID GASKET - ONLY AT DEALER
http://www.vertsoft.com/roman/8g5spd...P077_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P086_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...R002_SMALL.jpg
ASSEMBLE THE CENTER CONSOLE
http://www.vertsoft.com/roman/8g5spd...P089_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P091_SMALL.jpg
RUN THE CLUTCH LINE
http://www.vertsoft.com/roman/8g5spd...P092_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P093_SMALL.jpg
http://www.vertsoft.com/roman/8g5spd...P094_SMALL.jpg
CONNECT THE SHIFTER CABLES
http://www.vertsoft.com/roman/8g5spd...P008_SMALL.jpg
SHORT OUT PIN 9+10 ON THE BLACK HARNESS TO START THE CAR.
http://www.vertsoft.com/roman/8g5spd...P095_SMALL.jpg
CONNECT PIN 7+8 ON THE BLACK HARNESS TO REVERSE LIGHTS SELENOID
http://www.vertsoft.com/roman/8g5spd...P101_SMALL.jpg
NOW GET ALL THE FLUIDS IN AND TAKE A DRIVE 8)
NOTES
USE 2.5-3 QUARTS OF GEAR LUBE
CONNECT THE GROUND CABLE BACK TO THE TRANSMISSION
DO NOT CUT ANY HARNESSES
COMPATIBILITY
1999-2000: NO CHECK ENGINE LIGHT, NO PROBLEM
2001: REQUIRES A 2000 AUTO ECU/IMMOBILIZER WHICH YOU NEED TO GET REINITIALIZED AT THE DEALER IN ORDER TO GET RID OF THE CHECK ENGINE LIGHT
2002-2003: SPEED SENSOR REWIRING IS REQUIRED, STILL UNABLE TO GET RID OF THE CHECK ENGINE LIGHT
2002 ECU IS NOT COMPATIBLE WITH 2001, 2000, 1999 ECUS.
ALL MY RESEARCH
This is "How to Adjust your Clutch Pedal"
I want to thank Brian(Stewi), Dustin(theblackpearl), Jason(mrjaydeeone)and Anthony(not a member of this board) for helping me with this job. Thank You Guys! :thumbsup: