RIPP SDS 4cyl kit DONE and Dyno'd (Automatic)
formal thank you to Davin (Owner of the Galant tester) for being the test bed for our SDS. WITHOUT HIM WE WOULD NOT have BEEN ABLE TO BUILD A KIT....
We are going to need a 2nd tester a 5SPD and it must be an 4cyl Eclipse. You must be in the Tri State area.
OK guys the testing is over the maps for the Automatic have been written. When all was said and done we were able to run 5-6psi. The Supercharger sounds sweet it has a nice growl compared to stock.
The RPMS shoot up nice and fast and very dynamically. The HP curve is very smooth and there are no dead spots. We were able to keep the Air fuel ratios at 13.1-13.2 with virtually now load up at all.
When we were done we laid down 179.3whp and 178.7lbs or torque (224.1 crank HP). This makes for a very strong accelerating car. We had base lined this car before the SDS and found only 103.3WHP (sorry all you auto guys). So our goal of a 200whp 4cyl is very doable. as with a 5spd we will be able to sneak it out with no problems.
We didn't want to push the automatic to much as it is the first one out there, as we log miles and do testing we will keep everyone updated.
As the kit stands it comes with:
SDS 4cyl (CNC design and built)
SDS Brackets including idle pulleys (CNC design and built)
Vortech V5 GTrim
Walboro 255 Fuel Pump
RC Engineering 550cc Atomizer
Malpazzi Boost sensing rising rate fuel pressure regulator
RIPP Black Box
RIPP Black Box 2bar map sensor
Injector harness
Injector LED
Oil return and feed
Oil return "No Weld" adapter
Air filter
Longer Drive Belt
CNC MAR adapter
CNC Boost pipes
Vacuum lines and tee's
Fuel lines and tee's
All clamps and Zip Ties.
All fully illustrated instructions
1 year warranty on SDS
2 year on Vortech (By Vortech Thru RIPP)
The 4cyl kit also includes the 45000 RPM bearing that all the 6cyl kits are getting now. The 4cyl kit did not need a blow off valve or by-pass valve. All the "Whoosh" sound comes from the built in clutch system of the Vortech.
We are still speculating a price of $3495.99----$3595.99. This is all pending quantity of product. I'll try to make it the lower of the 2. I my put a group by together for the lesser of the 2 prices. It really depends on all of you.
Thanks for your patience,
Ross Esposito
Ripp Modification
718-442-4723
www.rippmods.com