Bringing the galant back from the dead
Figured I would start an actual build thread instead of just posting in the new members section-So here it is.
Its a 99 galant es, I found it sitting in the previous owners yard with flat tires half sunk in the dirt.
we made a deal, and he towed it to my house, and away I started.
It has a full air ride suspension, with 8 valves 4 switches, a 5 or 10 gallon tank with one cheap pos compressor. The back two bags were blown, So i sent them off to air bag it and got them resleeved and just got them back today!
http://i41.tinypic.com/16bzn1u.jpg
I installed them today and finally got the galant rear end off the blocks I had to put it on.
http://i43.tinypic.com/2gvknti.jpg
And it gets pretty decent lift (Front body kit isnt mounted yet, I have to re-fiberglass the front tabs back on, and then it will be molded onto the front just like the rears molded on the back)
http://i43.tinypic.com/2dbkzz9.jpg
And a couple shots of it laid out
http://i39.tinypic.com/r23ngn.jpg
http://i43.tinypic.com/334htsp.jpg
Next step is tidying up the trunk, Theres no spare tire, no floor, just a tank and compressor and valves all over. So I'm thinking of making a plywood floor and then make some room for this sucker.
http://i40.tinypic.com/2nk3mgo.jpg
Type R 15" left, Older type R 12" right. That 15 is massive.
A lot of work to do still, But atleast now I have a movable car LOL.